Contec PIO-32/32T(PCI) Digital Input block (not recommended)
Simulink® Real-Time™ Library of Drivers No Longer Recommended for Use.
To open this library, type
xpcobsoletelib in the Command
I/O Module Input
Block Output Data Type
TTL low = 0.0
serial, the block is configured to accept
up to 32 one-bit input channels. If you select
parallel, the block is configured to accept a
single 32-bit input channel and the channel vector parameter is
If you selected
serial I/O format, enter a vector
of numbers to specify the input channels for serial I/O format. For
example, to use the first and third digital input channels, enter
The channel numbers can occur in arbitrary order, but the numbers must be in the range 1 to 32.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
If only one board of this type is in the target computer, enter
locate the board.
If two or more boards of this type are in the target computer, enter the bus number and the
PCI slot number of the board associated with this driver block. Use the format
To determine the bus number and the PCI slot number, type:
tg = slrt; getPCIInfo(tg, 'installed')