GE Fanuc 5565 init

GE Fanuc PCI-5565 initialization block (not recommended)


Simulink® Real-Time™ Library of Drivers No Longer Recommended for Use.

To open this library, type xpcobsoletelib in the Command Window.


Before you begin to configure these block parameters, be sure that you have a predefined node initialization structure. See Initialize GE Fanuc Shared Nodes.

Each model that uses shared memory must have one 5565 initialization block for every PCI-5565 board in the system.

Block Parameters

Node struct

Enter the name of the predefined node initialization structure.

PCI slot (-1:autosearch)

If only one board of this type is in the target computer, enter -1 to locate the board.

If two or more boards of this type are in the target computer, enter the bus number and the PCI slot number of the board associated with this driver block. Use the format [BusNumber,SlotNumber].

To determine the bus number and the PCI slot number, type:

tg = slrt;
getPCIInfo(tg, 'installed')

Introduced in R2009a

Was this topic helpful?