GE Fanuc PCI-5565 read block
Simulink® Real-Time™ Library for GE® Fanuc (VMIC)
Before you begin to configure this block, be sure that you have a predefined shared memory partition structure. The 5565 read block requires this structure to specify how Simulink signal values are mapped in the shared memory. It also uses this structure to determine the total size and address of the shared memory. See Create GE Fanuc Shared Partitions.
Enter the name of the predefined shared memory partition structure. The block uses this structure to specify how Simulink signal values map into shared memory.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited)
If only one board of this type is in the target computer, enter
locate the board.
If two or more boards of this type are in the target computer,
enter the bus number and the PCI slot number of the board associated
with this driver block. Use the format
To determine the bus number and the PCI slot number, type:
tg = slrt; getPCIInfo(tg, 'installed')
Select this check box to monitor the status of the PCI-5565 board LISR register modes.