Image Transmit block
Simulink® Real-Time™ Library for Video Utilities
Number of bytes to transmit.
Visible when the Allow variable length packets check box is set.
The Image Transmit block sends the video frame from the target computer to the development computer at the IP address and port pair.
Specify the IP address of the target computer to which you send
the video frames. To broadcast the video frames to all
listening computers, enter
255.255.255.255. The Remote
IP port to send to parameter specifies the port for the
Specify the target computer port to which you send the video frames. The IP address sent to (255.255.255.255 for broadcast) parameter specifies the IP address for the destination.
Specify the target computer port from which to send the video frames.
-1 to automatically assign a port for
the target computer.
Select this check box to enable the transmission of variable-length frames. For example, use this option for compressed frames, because the length of each frame varies.
If this check box is selected, the
sends the actual data. The
Length input port becomes
visible and contains the number of bytes being sent. If the port size
is less than
Length, the block sends up to the
If this check box is cleared (default), the block sends only fixed-length packets.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).