PC104-DAS16JR/12 Digital Input block
Simulink® Real-Time™ Library for Measurement Computing™
I/O Module Input
Block Output Data Type
TTL low = 0.0
Enter a number between 1 and 4 to select the number of digital input lines used. This driver does not allow the selection of individual digital input lines.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
Enter the base address of the board. This entry must correspond
to the DIP switch setting on the board. For example, if the DIP switch
setting is 300 (hexadecimal), enter