Measurement Computing PC104-DAS16JR/16 Digital Output

PC104-DAS16JR/16 Digital Output


Simulink® Real-Time™ Library for Measurement Computing™

Scaling Input to Output

I/O Module Output

Block Input Data Type




< 0.5 = TTL low
≥ 0.5 = TTL high

Block Parameters

Number of Channels

Enter a number between 1 and 4 to select the number of digital output lines used. This driver does not allow the selection of individual digital output lines.

Sample time

Enter the base sample time or a multiple of the base sample time (-1 means sample time is inherited).

Base address

Enter the base address of the board. This entry must correspond to the DIP switch setting on the board. For example, if the DIP switch setting is 300 (hexadecimal), enter 0x300.

Was this topic helpful?