PC104-DAS16JR/16 Digital Output
Simulink® Real-Time™ Library for Measurement Computing™
I/O Module Output
Block Input Data Type
< 0.5 = TTL low
Enter a number between 1 and 4 to select the number of digital output lines used. This driver does not allow the selection of individual digital output lines.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
Enter the base address of the board. This entry must correspond
to the DIP switch setting on the board. For example, if the DIP switch
setting is 300 (hexadecimal), enter