SBS25x0 init block (not recommended)
Simulink® Real-Time™ Library of Drivers No Longer Recommended for Use
Before you begin to configure these block parameters, be sure that you have a predefined node initialization structure. See Initialize GE Intelligent Platforms Shared Nodes.
Each model that uses shared memory must have one 5565 init block for every SBS Broadcast Memory board in the system.
Enter the name of the predefined node initialization structure.
If only one board of this type is in the target computer, enter
locate the board.
If two or more boards of this type are in the target computer,
enter the bus number and the PCI slot number of the board associated
with this driver block. Use the format
To determine the bus number and the PCI slot number, type:
tg = slrt; getPCIInfo(tg, 'installed')