IP-Digital 24 Digital Input block
Simulink® Real-Time™ Library for SBS Broadcast Memory
Block Output Data Type
TTL low = 0.0
Enter the Carrier ID of the IP carrier board into which the IP module is plugged.
To use an IP module, it must be physically plugged into an IP carrier board and the model must contain a block representing this carrier board. Each carrier block has a Carrier ID parameter, which must be set to a number not shared by another carrier board block in the model.
Select the slot on the carrier board into which the IP-Digital 24 module is plugged. Different carrier boards can have different slot capacities.
Enter numbers between 1 and 24 to select the digital input lines to be used. This driver allows the selection of individual digital input lines in arbitrary order. The number of elements defines the number of lines used.
For example, to use the first three digital inputs, enter
Number the lines beginning with 1 even if this board manufacturer starts numbering the lines with 0.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).