IP-Unidig-E-48 Digital Output block
Simulink® Real-Time™ Library for SBS Technologies
Block Output Data Type
TTL low = 0.0
Enter the Carrier ID of the IP carrier board into which the IP module is plugged.
To use an IP module, it must be physically plugged into an IP carrier board and the model must contain a block representing this carrier board. Each carrier block has a Carrier ID parameter, which must be set to a number not shared by another carrier board block in the model.
Enter numbers between 1 and 48 to select the digital output lines to be used. This driver allows the selection of individual digital output lines in arbitrary order. The number of elements defines the number of lines used.
For example, to use the first three digital outputs, enter
Number the lines beginning with 1 even if this board manufacturer starts numbering the lines with 0.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).