Configure TCP server application that uses the specified Ethernet interface
Configure a TCP server application and initialize a network interface for the application.
The combination of Server IP Address and Subnet mask must be unique across all Ethernet cards in the target computer, including the card for communicating between the development and target computers. Distinguish cards by specifying a different subnet for each. The subnet is the IP address masked by the subnet mask.
The Simulink® Real-Time™ TCP blocks function only when executed on the target computer. When simulated on the development computer, they do nothing.
Use host-target connection— Use Ethernet connection between development and target computers
Selecting the Use host-target connection parameter
disables the Server IP address, Subnet
mask, PCI bus, and PCI slot parameters
and excludes the ports
use by TCP.
Server IP address— IP address of the server device that is being configured
invalid IP addresses.
To enable this parameter, clear the Use host-target connection parameter.
Function— PCI function number of Ethernet card
0(default) | integer
Enter the PCI function number for the Ethernet card.