PD2-DIO-64 Digital Input block
Simulink® Real-Time™ Library for UEI
I/O Module Input
Block Output Data Type
TTL low = 0.0
Note that each block of 16 ports must be input or output.
Select the specific board type from the list provided.
From the list, select the first channel of the port. Each port is 16 bits. This value plus the Channel vector value appear on the terminal block.
Enter a vector of numbers to specify the input channels. For example, to use the first and third digital input channels, enter
The channel numbers can occur in arbitrary order. Number the
channels beginning with
0, which is the same as
the numbering on the I/O module label.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
If only one board of this type is in the target computer, enter
locate the board.
If two or more boards of this type are in the target computer,
enter the bus number and the PCI slot number of the board associated
with this driver block. Use the format
To determine the bus number and the PCI slot number, type:
tg = slrt; getPCIInfo(tg, 'installed')