A&D Technology offers a comprehensive range of innovative powertrain testing and development solutions for the test cell, including data acquisition, control, and combustion analysis hardware and software tools, as well as real-time simulation systems based on Simulink® and model-based automated calibration tools compatible with MATLAB® and Simulink.

add2 provides flexible simulation, test and development systems. We will be introducing our new, fully integrated, scaleable Hardware-in-the-Loop test system at this event. Add2’s Genix  HIL systems, MICROGen RCP/ gateway units and VISUALCONNX visualisation software are used by our customers worldwide to develop and test their controllers more cost effectively.

Altera offers FPGAs, CPLDs, and structured ASICs in combination with software tools, intellectual property, and customer support to provide high-value programmable solutions that get you to market fast and for less, so you can design your next generation products with confidence.

As a strategic partner for the automotive industry, Berner & Mattner develops specification and engineering tools for the model-based development of ECUs. By bringing together technology, engineering, and services, Berner & Mattner optimizes the development process of automotive manufacturers and their suppliers. We specialize in providing complete turnkey solutions. Our services range from consultancy to design, development, and operation of innovative HIL systems.

Mechanical Simulation Corporation develops and distributes advanced software to simulate vehicle dynamic performance under a wide variety of conditions.  CarSim, BikeSim and TruckSim are complete car, motorcycle, and truck simulation packages that are used worldwide by more than 60 OEMs and Tier 1 suppliers and 130 universities and government research groups.  Visit www.carsim.com for more information.

dSPACE is the world’s leading producer of engineering tools for developing electronic control units (ECUs) and mechatronic controls. Founded 20 years ago, dSPACE now has more than 800 employees worldwide. Using dSPACE systems, manufacturers of controllers and ECUs dramatically reduce their development times and costs, and noticeably increase their productivity.

ETAS is a reliable and responsible partner to the automotive industry and provides its customers with comprehensive and integrated tools and tool solutions for development and service of automotive ECUs. As a premium tool supplier, ETAS consistently delivers on innovation, price-performance ratio, and quality across all phases of ECU development and service. www.etas.com

EUtech Scientific Engineering develops state-of-the-art products and turnkey solutions for Automation & Control, Measurement Instrumentation and Testing applications. A suite of dedicated software tools is available to support Model Based Design strategies (RCP, HiL). Our clients hail from the Aerospace, Automotive, Fuel Cell technology and Power Generating industries.

Founded in 1982, Green Hills Software, Inc. is the technology leader in device software optimization (DSO) and real-time operating systems for 32-bit embedded systems. Our royalty-free INTEGRITY®,  velOSity™ and  µ-velOSity™ real-time operating systems and software development environments offer a complete development solution that addresses both deeply embedded and high-reliability applications. www.ghs.com.

IPG Automotive GmbH is an international supplier of simulation solutions, test systems and engineering services for model based engineering of ECUs, vehicle components and complete vehicles. The vehicle dynamics simulation tools CarMaker®, MotorcycleMaker and TruckMaker continuously assist in the vehicle development and can be used on a PC as well as on IPG's turn-key HIL simulators and individual mechatronic test benches. The customized engineering services help OEMs and components suppliers to meet the challenges of safety, comfort, agility and fuel consumption throughout the product development lifecycle.

ITI GmbH, a Mathworks Connections Partner, develops software for the design, modelling, and analysis of technical systems and components. ITI currently supports cosimulation with Simulink®, code import to Simulink® and Real Time Workshop®, code export of ITI models to Simulink, and integration of MATLAB® code via DLL.

As a premium development partner, ITK Engineering has been working with renowned companies in various industries for many years. They benefit from our expertise in Software Engineering and Embedded Systems, Model-Based Design and Testing as well as Control Systems Design and Signal Processing. Visit www.itk-engineering.com for more information.

IT Power Consultants provide competent services for the development of automotive embedded software. Besides our profound knowledge in requirements management and systematic testing, we possess core competencies in model-based development. We support the introduction of model-based processes and the implementation of functional software models. For more information visit www.itpower.de.

Mentor Graphics ®  Corporation (NASDAQ: MENT) is a technology leader in electronic design automation (EDA), providing sophisticated software and hardware design solutions that enable its customers to develop better electronic products faster and more cost-effectively. The company offers innovative products, solutions and services that help engineers overcome the design challenges they face in the increasingly complex worlds of board and chip design.

pure-systems is the leading provider of tools and solutions for software product lines and variant management. pure-systems efficiently solves the problem of managing variability in Simulink® models, facilitating model configuration management and reuse. pure-systems' solution is embedded within MATLAB® and Simulink and seamlessly integrates with other tools for requirements and software engineering.

SimuQuest provides tools and services that leverage the MathWorks™ platform to optimize the Model-Based Development of embedded systems.  Customers have been able to eliminate hand-coding through the use of SimuQuest’s UniPhi and QuantiPhi tools, resulting in improved product quality and up to 80% savings in productivity and cost.

Speedgoat is a leading provider of high-quality turn-key real-time solutions including target machines, I/O modules, software, and services optimised for the use with MathWorks™ products for Model-Based Design, including xPC Target™. With our solutions we serve high-tech companies world-wide from a broad range of industries in the domain of Rapid-Prototyping, Hardware-in-the-Loop, and Deployment.

Telelogic is the leading global provider of software solutions for Enterprise Lifecycle Management (ELM). Award-winning Telelogic software helps customers design, develop, and deliver the world’s most advanced and innovative products, systems, and software more efficiently by aligning and optimizing development lifecycles and business processes with business objectives and customer needs. www.telelogic.com

TESIS DYNAware provides a flexible, integrative simulation framework with high-precision models for vehicle and engine dynamics. OEMs and automotive industry suppliers worldwide use our software to achieve reliable simulation results during all stages of controller and component development. More at www.tesis.de/dynaware

TNO aims to contribute to making our future means of transport safer, cleaner and more efficient. Research and development of automotive systems and components is our core business. We concentrate on a number of themes. In these areas we belong to the world's top R&D institutions, with a number of the world’s top automotive companies among our clients.

VaST Systems drives electronics virtualization. VaST fundamentally changes the electronics industry by breaking the dependency on hardware prototypes. With VaST electronics, companies develop virtual system prototypes—timing-accurate, high-speed simulation models of their electronic systems—for use in design and supply chain enablement. Using virtualization, customers develop software before hardware, enable early software development by ecosystem partners, and cut time-to-market by 8 months or more. VaST’s customers include worldwide leaders in automotive, consumer, and wireless markets.

Vector Informatik provides OEMs and suppliers of automotive and related industries a professional and open development platform of tools, software components and services for creating embedded systems. Vector Consulting Services supports clients in optimizing technical product development. Application Areas of Vector: Development of Distributed Systems, ECU-Test, ECU-Software, ECU-Calibration, Vehicle Diagnostics, Process Management. www.vector-informatik.com