Zynq UDP Server Model example not working

1 view (last 30 days)
Hello,
I am trying to run the zynq_udp_server model but it does not work. I followed the steps written in this manual. It compiles well, but then, when the command window opens to download the program on the Zynq it says:
"C:/Xilinx/14.4/ISE_DS/EDK/gnu/arm/nt/bin/arm-xilinx-linux-gnueabi-gcc.exe" ./Ho
stLib_Network.o ./HostLib_rtw.o ./linuxUDP.o ./MW_csl.o ./zynq_udp_server.o ./zy
nq_udp_server_data.o ./zynq_udp_server_main.o -lm -ldl -lrt -lpthread -o
./CustomMW/zynq_udp_server
"Evaluating build target..."
"Evaluating execute target..."
"C:/MATLAB/SupportPackages/R2013b/zynq/download.bat" "C:\Program Files\MATLAB\R2
013b\toolbox\idelink\foundation\hostapps" "root" "root" "10.20.43.95" "/tmp" "./
CustomMW/zynq_udp_server"
'"C:/MATLAB/SupportPackages/R2013b/zynq/download.bat"' is not recognized as an i
nternal or external command,
operable program or batch file.
cs-make: *** [execute] Error 1
C:\Users\Home\Documents\MATLAB\zynq_udp_server_xilinxise>
There is no download.bat in that folder. I am using ISE 14.4 and Matlab 2013b.
I found a download.bat somewhere, but it does not work either:
@echo off
IF "%PROCESSOR_ARCHITECTURE%"=="x86" set XMD_DIR=D:\Xilinx\14.4\ISE_DS\EDK\bin\nt
IF "%PROCESSOR_ARCHITECTURE%"=="AMD64" set XMD_DIR=D:\Xilinx\14.4\ISE_DS\EDK\bin\nt64
%XMD_DIR%\xmd.exe -tcl zynq_udp_server
pause
When trying with it, it says The device is not ready but Zynq does respond to h.checkConnection() on Matlab:
"C:/Xilinx/14.4/ISE_DS/EDK/gnu/arm/nt/bin/arm-xilinx-linux-gnueabi-gcc.exe" ./Ho
stLib_Network.o ./HostLib_rtw.o ./linuxUDP.o ./MW_csl.o ./zynq_udp_server.o ./zy
nq_udp_server_data.o ./zynq_udp_server_main.o -lm -ldl -lrt -lpthread -o
./CustomMW/zynq_udp_server
"Evaluating build target..."
"Evaluating execute target..."
"C:/MATLAB/SupportPackages/R2013b/zynq/download.bat" "C:\Program Files\MATLAB\R2
013b\toolbox\idelink\foundation\hostapps" "root" "root" "10.20.43.95" "/tmp" "./
CustomMW/zynq_udp_server"
The device is not ready.
Press any key to continue . . .
I do not know what else to try.
Thanks in advance if someone can help.

Accepted Answer

Correus Basura
Correus Basura on 4 Jan 2016
Ok, could be that the ISE installation did not work properly. I installed ISE 14.4 in another computer and this time there was a download.bat in the folder.
I attach the file here. You just need to remove .txt from the file name and copy it in the proper Matlab folder (depends on your version). Mine is this one:
C:\MATLAB\SupportPackages\R2013b\zynq
Cheers!

More Answers (0)

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!