## how to solve Dijkstra algorithm in MATLAB?

### Sivakumaran Chandrasekaran (view profile)

on 24 Aug 2012

on 14 Nov 2013

I used the command “graphshortestpath” to solve “Dijkstra”. I am not getting the correct answer as the output is concentrating on the reduction of nodes alone. I need to follow the path of reduced distance(between 2 nodes) alone.

My coding is for 24 nodes.

```clc;
clear all;
close all;
W = [2.10 1.65 2.20 1.50 1.55 2 1.50 1.05 1.75 1.75 1.75 1 1 0.4 1.25 0.75 1.50 1.75 2 2 1.75 0.65 1.05 1.75 0.45 2.75 1.75 1.75 0.5 1.05 0.75 1 1.50 1.25 1 0.75 0.75 0.5 0.5 0.75 0.5];
DG = sparse([1 1 1 1 1 2 2 2 3 3 4 4 4 4 5 5 6 6 7 7 8 8 8 9 9 10 10 11 12 16 16 17 17 18 19 19 20 21 23 24 25],[2 3 4 16 19 5 6 17 6 7 7 8 12 24 9 18 9 10 10 11 7 22 23 10 25 13 14 13 21 2 17 5 18 15 4 20 12 22 11 3 14],W);
g=DG;
names=W;
h = view(biograph(DG,[],'ShowWeights','on'))
s=1;
d=input ('Enter the Destination node : ');
[dist,path,pred]=graphshortestpath(DG,s,d,'Directed',true,'method','Dijkstra');
set(h.Nodes(path),'Color',[1 0.4 0.4]);
edges = getedgesbynodeid(h,get(h.Nodes(path),'ID'));
set(edges,'LineColor',[1 0 0])
set(edges,'LineWidth',1.5)
```

For the path node 1- node10, manual output is 1-16-2-6-10 But, I got the output as 1-3-6-10.

## Products

### Lucio Cetto (view profile)

on 24 Sep 2012

I get the distance of 1-16-2-6-10 to be 5.8, while 1-3-6-10 is 5.15. HTH

on 14 Nov 2013

I am getting the same as previous comment above, there could be some mistake in manual solution that you attempted. Because even by looking up on your network its obvious that SP is 1-3-6-10.