Agilent 33220A Function Generator - Driver

MATLAB instrument driver for the Agilent 33220A Function / Arbitrary Waveform Generator

Description

MATLAB is a software environment and programming language used to configure and control instruments, generate waveforms, make measurements, analyze data, and build test systems.

MATLAB supports Agilent function generators through the Instrument Control Toolbox. This MATLAB instrument driver is for use with Instrument Control Toolbox v2.4.1 and higher. It supports the Agilent 33220A function generator.

It is a standalone MATLAB instrument driver that does not require any additional instrument drivers to operate.

Information on using MATLAB and Instrument Control Toolbox for instrument communication is available at:
http://www.mathworks.com/products/instrument

For additional information on using MATLAB with Agilent instruments, including MATLAB examples, demos, drivers, and videos, visit:
http://www.mathworks.com/agilent
 
NOTE: Some browsers may render the driver file rather than saving the file to disk. If this occurs, select "Save As..." from the File menu of your browser to save the driver data to a local file.

• Required Products: Instrument Control Toolbox
• MATLAB release: MATLAB 7.3 (R2006b)

[Jim Grayson]

Works for me.

[anas domi]

good

[Rene Hell]

Setting a DC Value doesn't work. It says in the file it can be set to 5Vdc (10Vdc) by setting the Offset Value. I tried different approaches but was not able to set the DC Value that high because the Offset Value is limited to 0.2 (0.4).