| [n,b,x,nelt,ia,ja,a,isym,itol,tol,itmax,iter,err,ierr,iunit,rwork,lenw,iwork,leniw]=dsdbcg(n,b,x,nelt,ia,ja,a,isym,itol,tol,itmax,iter,err,ierr,iunit,rwork,lenw,iwork,leniw); |
function [n,b,x,nelt,ia,ja,a,isym,itol,tol,itmax,iter,err,ierr,iunit,rwork,lenw,iwork,leniw]=dsdbcg(n,b,x,nelt,ia,ja,a,isym,itol,tol,itmax,iter,err,ierr,iunit,rwork,lenw,iwork,leniw);
%***BEGIN PROLOGUE DSDBCG
%***PURPOSE Diagonally Scaled BiConjugate Gradient Sparse Ax=b Solver.
% Routine to solve a linear system Ax = b using the
% BiConjugate Gradient method with diagonal scaling.
%***LIBRARY SLATEC (SLAP)
%***CATEGORY D2A4, D2B4
%***TYPE doubleprecision (SSDBCG-S, DSDBCG-D)
%***KEYWORDS ITERATIVE PRECONDITION, NON-SYMMETRIC LINEAR SYSTEM, SLAP,
% SPARSE
%***AUTHOR Greenbaum, Anne, (Courant Institute)
% Seager, Mark K., (LLNL)
% Lawrence Livermore National Laboratory
% PO BOX 808, L-60
% Livermore, CA 94550 (510) 423-3141
% seager@llnl.gov
%***DESCRIPTION
%
% *Usage:
% INTEGER N, NELT, IA(NELT), JA(NELT), ISYM, ITOL, ITMAX
% INTEGER ITER, IERR, IUNIT, LENW, IWORK(10), LENIW
% doubleprecision B(N), X(N), A(NELT), TOL, ERR, RWORK(8*N)
%
% CALL DSDBCG(N, B, X, NELT, IA, JA, A, ISYM, ITOL, TOL,
% $ ITMAX, ITER, ERR, IERR, IUNIT, RWORK, LENW, IWORK, LENIW )
%
% *Arguments:
% N :IN Integer
% Order of the Matrix.
% B :IN doubleprecision B(N).
% Right-hand side vector.
% X :INOUT doubleprecision X(N).
% On input X is your initial guess for solution vector.
% On output X is the final approximate solution.
% NELT :IN Integer.
% Number of Non-Zeros stored in A.
% IA :INOUT Integer IA(NELT).
% JA :INOUT Integer JA(NELT).
% A :INOUT doubleprecision A(NELT).
% These arrays should hold the matrix A in either the SLAP
% Triad format or the SLAP Column format. See 'Description',
% below. If the SLAP Triad format is chosen it is changed
% internally to the SLAP Column format.
% ISYM :IN Integer.
% Flag to indicate symmetric storage format.
% If ISYM=0, all non-zero entries of the matrix are stored.
% If ISYM=1, the matrix is symmetric, and only the upper
% or lower triangle of the matrix is stored.
% ITOL :IN Integer.
% Flag to indicate type of convergence criterion.
% If ITOL=1, iteration stops when the 2-norm of the residual
% divided by the 2-norm of the right-hand side is less than TOL.
% If ITOL=2, iteration stops when the 2-norm of M-inv times the
% residual divided by the 2-norm of M-inv times the right hand
% side is less than TOL, where M-inv is the inverse of the
% diagonal of A.
% ITOL=11 is often useful for checking and comparing different
% routines. For this case, the user must supply the 'exact'
% solution or a very accurate approximation (one with an error
% much less than TOL) through a common block,
% COMMON /DSLBLK/ SOLN( )
% If ITOL=11, iteration stops when the 2-norm of the difference
% between the iterative approximation and the user-supplied
% solution divided by the 2-norm of the user-supplied solution
% is less than TOL. Note that this requires the user to set up
% the 'COMMON /DSLBLK/ SOLN(LENGTH)' in the calling routine.
% The routine with this declaration should be loaded before the
% stop test so that the correct length is used by the loader.
% This procedure is not standard Fortran and may not work
% correctly on your system (although it has worked on every
% system the authors have tried). If ITOL is not 11 then this
% common block is indeed standard Fortran.
% TOL :INOUT doubleprecision.
% Convergence criterion, as described above. (Reset if IERR=4.)
% ITMAX :IN Integer.
% Maximum number of iterations.
% ITER :OUT Integer.
% Number of iterations required to reach convergence, or
% ITMAX+1 if convergence criterion could not be achieved in
% ITMAX iterations.
% ERR :OUT doubleprecision.
% Error estimate of error in final approximate solution, as
% defined by ITOL.
% IERR :OUT Integer.
% Return error flag.
% IERR = 0 => All went well.
% IERR = 1 => Insufficient space allocated for WORK or IWORK.
% IERR = 2 => Method failed to converge in ITMAX steps.
% IERR = 3 => Error in user input.
% Check input values of N, ITOL.
% IERR = 4 => User error tolerance set too tight.
% Reset to 500*D1MACH(3). Iteration proceeded.
% IERR = 5 => Preconditioning matrix, M, is not positive
% definite. (r,z) < 0.
% IERR = 6 => Matrix A is not positive definite. (p,Ap) < 0.
% IUNIT :IN Integer.
% Unit number on which to write the error at each iteration,
% if this is desired for monitoring convergence. If unit
% number is 0, no writing will occur.
% RWORK :WORK doubleprecision RWORK(LENW).
% doubleprecision array used for workspace.
% LENW :IN Integer.
% Length of the doubleprecision workspace, RWORK.
% LENW >= 8*N.
% IWORK :WORK Integer IWORK(LENIW).
% Used to hold pointers into the RWORK array.
% LENIW :IN Integer.
% Length of the integer workspace, IWORK. LENIW >= 10.
% Upon return the following locations of IWORK hold information
% which may be of use to the user:
% IWORK(9) Amount of Integer workspace actually used.
% IWORK(10) Amount of doubleprecision workspace actually used.
%
% *Description:
% This routine performs preconditioned BiConjugate gradient
% method on the Non-Symmetric positive definite linear system
% Ax=b. The preconditioner is M = DIAG(A), the diagonal of the
% matrix A. This is the simplest of preconditioners and
% vectorizes very well.
%
% The Sparse Linear Algebra Package (SLAP) utilizes two matrix
% data structures: 1) the SLAP Triad format or 2) the SLAP
% Column format. The user can hand this routine either of the
% of these data structures and SLAP will figure out which on
% is being used and act accordingly.
%
% =================== S L A P Triad format ===================
%
% This routine requires that the matrix A be stored in the
% SLAP Triad format. In this format only the non-zeros are
% stored. They may appear in *ANY* order. The user supplies
% three arrays of length NELT, where NELT is the number of
% non-zeros in the matrix: (IA(NELT), JA(NELT), A(NELT)). For
% each non-zero the user puts the row and column index of that
% matrix element in the IA and JA arrays. The value of the
% non-zero matrix element is placed in the corresponding
% location of the A array. This is an extremely easy data
% structure to generate. On the other hand it is not too
% efficient on vector computers for the iterative solution of
% linear systems. Hence, SLAP changes this input data
% structure to the SLAP Column format for the iteration (but
% does not change it back).
%
% Here is an example of the SLAP Triad storage format for a
% 5x5 Matrix. Recall that the entries may appear in any order.
%
% 5x5 Matrix SLAP Triad format for 5x5 matrix on left.
% 1 2 3 4 5 6 7 8 9 10 11
% |11 12 0 0 15| A: 51 12 11 33 15 53 55 22 35 44 21
% |21 22 0 0 0| IA: 5 1 1 3 1 5 5 2 3 4 2
% | 0 0 33 0 35| JA: 1 2 1 3 5 3 5 2 5 4 1
% | 0 0 0 44 0|
% |51 0 53 0 55|
%
% =================== S L A P Column format ==================
%
% This routine requires that the matrix A be stored in the
% SLAP Column format. In this format the non-zeros are stored
% counting down columns (except for the diagonal entry, which
% must appear first in each 'column') and are stored in the
% doubleprecision array A. In other words, for each column
% in the matrix put the diagonal entry in A. Then put in the
% other non-zero elements going down the column (except the
% diagonal) in order. The IA array holds the row index for
% each non-zero. The JA array holds the offsets into the IA,
% A arrays for the beginning of each column. That is,
% IA(JA(ICOL)), A(JA(ICOL)) points to the beginning of the
% ICOL-th column in IA and A. IA(JA(ICOL+1)-1),
% A(JA(ICOL+1)-1) points to the end of the ICOL-th column.
% Note that we always have JA(N+1) = NELT+1, where N is the
% number of columns in the matrix and NELT is the number of
% non-zeros in the matrix.
%
% Here is an example of the SLAP Column storage format for a
% 5x5 Matrix (in the A and IA arrays '|' denotes the end of a
% column):
%
% 5x5 Matrix SLAP Column format for 5x5 matrix on left.
% 1 2 3 4 5 6 7 8 9 10 11
% |11 12 0 0 15| A: 11 21 51 | 22 12 | 33 53 | 44 | 55 15 35
% |21 22 0 0 0| IA: 1 2 5 | 2 1 | 3 5 | 4 | 5 1 3
% | 0 0 33 0 35| JA: 1 4 6 8 9 12
% | 0 0 0 44 0|
% |51 0 53 0 55|
%
% *Side Effects:
% The SLAP Triad format (IA, JA, A) is modified internally to
% be the SLAP Column format. See above.
%
% *Cautions:
% This routine will attempt to write to the Fortran logical output
% unit IUNIT, if IUNIT ~= 0. Thus, the user must make sure that
% this logical unit is attached to a file or terminal before calling
% this routine with a non-zero value for IUNIT. This routine does
% not check for the validity of a non-zero IUNIT unit number.
%
%***SEE ALSO DBCG, DLUBCG
%***REFERENCES (NONE)
%***ROUTINES CALLED DBCG, DCHKW, DS2Y, DSDI, DSDS, DSMTV, DSMV
%***REVISION HISTORY (YYMMDD)
% 890404 DATE WRITTEN
% 890404 Previous REVISION DATE
% 890915 Made changes requested at July 1989 CML Meeting. (MKS)
% 890921 Removed TeX from comments. (FNF)
% 890922 Numerous changes to prologue to make closer to SLATEC
% standard. (FNF)
% 890929 Numerous changes to reduce SP/DP differences. (FNF)
% 910411 Prologue converted to Version 4.0 format. (BAB)
% 920407 COMMON BLOCK renamed DSLBLK. (WRB)
% 920511 Added complete declaration section. (WRB)
% 921113 Corrected C***CATEGORY line. (FNF)
%***end PROLOGUE DSDBCG
% .. Parameters ..
persistent locdin locdz locib lociw locp locpp locr locrb locrr locw locz loczz ;
if isempty(locrb), locrb=1; end;
if isempty(locib), locib=11 ; end;
% .. Scalar Arguments ..
% .. Array Arguments ..
% .. Local Scalars ..
if isempty(locdin), locdin=0; end;
if isempty(locdz), locdz=0; end;
if isempty(lociw), lociw=0; end;
if isempty(locp), locp=0; end;
if isempty(locpp), locpp=0; end;
if isempty(locr), locr=0; end;
if isempty(locrr), locrr=0; end;
if isempty(locw), locw=0; end;
if isempty(locz), locz=0; end;
if isempty(loczz), loczz=0; end;
% .. External Subroutines ..
%***FIRST EXECUTABLE STATEMENT DSDBCG
%
ierr = 0;
if( n<1 || nelt<1 )
ierr = 3;
return;
end;
%
% Change the SLAP input matrix IA, JA, A to SLAP-Column format.
[n,nelt,ia,ja,a,isym]=ds2y(n,nelt,ia,ja,a,isym);
%
% Set up the workspace.
lociw = fix(locib);
%
locdin = fix(locrb);
locr = fix(locdin + n);
locz = fix(locr + n);
locp = fix(locz + n);
locrr = fix(locp + n);
loczz = fix(locrr + n);
locpp = fix(loczz + n);
locdz = fix(locpp + n);
locw = fix(locdz + n);
%
% Check the workspace allocations.
[dumvar1,lociw,leniw,locw,lenw,ierr,iter,err]=dchkw('DSDBCG',lociw,leniw,locw,lenw,ierr,iter,err);
if( ierr~=0 )
return;
end;
%
iwork(4) = fix(locdin);
iwork(9) = fix(lociw);
iwork(10) = fix(locw);
%
% Compute the inverse of the diagonal of the matrix.
[n,nelt,ia,ja,a,isym,rwork(locdin:locdin+n-1)]=dsds(n,nelt,ia,ja,a,isym,rwork(locdin:locdin+n-1));
%
% Perform the Diagonally Scaled BiConjugate gradient algorithm.
[n,b,x,nelt,ia,ja,a,isym,dumvar9,dumvar10,dumvar11,dumvar12,itol,tol,itmax,iter,err,ierr,iunit,dumvar20,dumvar21,dumvar22,dumvar23,dumvar24,dumvar25,dumvar26,dumvar27,iwork(sub2ind(size(iwork),max(1,1)):end)]=dbcg(n,b,x,nelt,ia,ja,a,isym,@dsmv,@dsmtv,@dsdi,@dsdi,itol,tol,itmax,iter,err,ierr,iunit,rwork(locr:locr+n-1),rwork(locz:locz+n-1),rwork(locp:locp+n-1),rwork(locrr:locrr+n-1),rwork(loczz:loczz+n-1),rwork(locpp:locpp+n-1),rwork(locdz:locdz+n-1),rwork(sub2ind(size(rwork),max(1,1)):end),iwork(sub2ind(size(iwork),max(1,1)):end)); dumvar20i=find((rwork(locr:locr+n-1))~=(dumvar20));dumvar21i=find((rwork(locz:locz+n-1))~=(dumvar21));dumvar22i=find((rwork(locp:locp+n-1))~=(dumvar22));dumvar23i=find((rwork(locrr:locrr+n-1))~=(dumvar23));dumvar24i=find((rwork(loczz:loczz+n-1))~=(dumvar24));dumvar25i=find((rwork(locpp:locpp+n-1))~=(dumvar25));dumvar26i=find((rwork(locdz:locdz+n-1))~=(dumvar26));dumvar27i=find((rwork(sub2ind(size(rwork),max(1,1)):end))~=(dumvar27)); rwork(locr-1+dumvar20i)=dumvar20(dumvar20i); rwork(locz-1+dumvar21i)=dumvar21(dumvar21i); rwork(locp-1+dumvar22i)=dumvar22(dumvar22i); rwork(locrr-1+dumvar23i)=dumvar23(dumvar23i); rwork(loczz-1+dumvar24i)=dumvar24(dumvar24i); rwork(locpp-1+dumvar25i)=dumvar25(dumvar25i); rwork(locdz-1+dumvar26i)=dumvar26(dumvar26i); rwork(1-1+dumvar27i)=dumvar27(dumvar27i);
%------------- LAST LINE OF DSDBCG FOLLOWS ----------------------------
end
%DECK DSDCG
|
|
