No BSD License  

Highlights from
Analysis of suspension system using MATLAB, SIMULINK and Simscape

4.125
4.1 | 8 ratings Rate this file 46 Downloads (last 30 days) File Size: 106 KB File ID: #18410 Version: 1.0
image thumbnail

Analysis of suspension system using MATLAB, SIMULINK and Simscape

by

kiran Jacob (view profile)

 

22 Jan 2008 (Updated )

modelling of suspension sytem of a quarter car using MathWorks prducts

| Watch this File

File Information
Description

In this current work the ride and handling performance of an automobile with passive suspension system is simulated and analyzed. The suspension system modeled considered here as a two degree of freedom quarter car model. The suspension system designed here is totally designed and analyzed separately using MathWorks products namely MATLAB, Simulink and Simscape and tries to draw conclusion on which of these MathWorks products provides better results and which product is easy to work with, in relation lumped parameter models in this case suspension system

Required Products Control System Toolbox
Simscape
Simulink
MATLAB release MATLAB 7.4 (R2007a)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (15)
15 Apr 2015 Hammad ur rehman  
31 Jan 2012 Olexander Zhytenko

hi
why the simulation quarter car model are small fluctuations of the masses (0.0000006 m)?
not realistic!!!
explain the results.

Comment only
30 Jan 2012 Olexander Zhytenko

hi
how to build a half-car model using Simscape?

Comment only
10 Nov 2011 Jack Becerra H.

I'm studying this kind of systems but I think Javier Ruiz is right. Maybe you could put a force as input instead of Zr=0.2m.

Comment only
03 Oct 2011 stam pas

hi! i want to build a quarter car model with simscape and i want to ask if gravity exists on this model.

Comment only
20 Jul 2011 Shakshi rana

hi! i m looking for help in modelling suspension systems for quarter car model for passive,semi-active and active suspension system... kindly help me with equations for the same as i have confusion in that.... however, i need just help in basics of this paper... if u can help, kindly mail me .........
regards, sakshi rana

Comment only
13 May 2011 Javier Ruiz  
17 Apr 2011 Javier Ruiz

Hi, I know this is a little late but I am concerned about the way you connect the Zr input to the simscape model. If I am not mistaken you are trying to have a Road Profile of 0.2 m applied to the Quarter of Vehicle. Nonetheless, you are using a Simscape force source with 0.2 as driving input. In this way you are applying a force of 0.2 N to the lower spring, which is not equivalent to a 0.2m road.
Regards.

Comment only
07 May 2010 wajdi aboud

I also intend to build a quarter or half car model of active suspension system controlled by LMI using simulink and I want to use your model as the basis. Your model is very great but I still confuse where I should connect the controller in case I want to add controller. Maybe you can explain and give examples to me. Please help me. Thank you very much.

Comment only
14 Apr 2010 Charles  
17 Mar 2010 Ignacio Belatti

thank you very much

04 Nov 2009 Rendy Dalimunthe

I intend to build a full car model of active suspension system controlled by fuzzy using simscape and I want to use your model as the basis. Your model is very great but I still confuse where I should connect the controller in case I want to add fuzzy controller. Maybe you can explain and give examples to me. Please help me. Thank you very much.

10 Apr 2008 Gökhan Cerezci  
22 Feb 2008 julio del pozo  
04 Feb 2008 JITENDRA VALLURI  

Contact us