No BSD License
-
AllSpoll(boardID, addrlist)
[retval, results] = AllSpoll(boardID, addrlist)
-
DevClear(boardID, addr)
retval = DevClear(boardID, addr)
-
DevClearList(boardID, addrlis...
retval = DevClearList(boardID, addrlist)
-
DyeLaserAsciiToDec(ConvertInp...
This function was written by Tom Spinka on Sept. 28, 2007 for converting
-
DyeLaserClose(DyeHandle);
Written by Tom Spinka on May 13, 2008 for returning the dye laser to
-
DyeLaserConfig(DyeAddr)
Written by Tom Spinka on Sept. 26, 2007 for initializing the GPIB board
-
DyeLaserDecToAscii(DecIn, Num...
Created by Tom Spinka on Sept. 28, 2007 for converting a decimal position
-
DyeLaserMoveToWavelength(Wave...
Written by Tom Spinka on Sept. 28, 2007 for controlling the grating angle
-
DyeLaserRead(BdHandle, DyeHan...
Written by Tom Spinka on Sept. 26, 2007 for the control of read
-
DyeLaserWrite(BdHandle, DyeHa...
Written by Tom Spinka on Sept. 26, 2007 for completing a write operation
-
EnableLocal(boardID, addrlist...
retval = EnableLocal(boardID, addrlist)
-
EnableRemote(boardID, addrlis...
retval = EnableRemote(boardID, addrlist)
-
FindLstn(boardID, addrlist, l...
-
FindRQS(boardID, addrlist)
[retval, dev_stat] = FindRQS(boardID, addrlist)
-
GPIBBoardConfig();
Written by Tom Spinka on Oct. 3, 2007 for initializing the GPIB board.
-
PPoll(boardID)
-
PPollConfig(boardID, addr, da...
retval = PPollConfig(boardID, addr, dataLine, lineSense)
-
PPollUnconfig(boardID, addrli...
retval = PPollUnconfig(boardID, addrlist)
-
PassControl(boardID, addr)
retval = PassControl(boardID, addr)
-
RcvRespMsg(boardID, cnt, Term...
[retval, buffer] = RcvRespMsg(boardID, cnt, Termination)
-
ReadStatusByte(boardID, addr)
[retval, result] = ReadStatusByte(boardID, addr)
-
Receive(boardID, addr, cnt, T...
-
ReceiveSetup(boardID, addr)
retval = ReceiveSetup(boardID, addr)
-
ResetSys(boardID, addrlist)
retval = ResetSys(boardID, addrlist)
-
Send(boardID, addr, databuf, ...
retval = Send(boardID, addr, databuf, datacnt, eotMode)
-
SendCmds(boardID, buffer, cnt...
retval = SendCmds(boardID, buffer, cnt)
-
SendDataBytes(boardID, buffer...
retval = SendDataBytes(boardID, buffer, cnt, eot_mode)
-
SendIFC(boardID)
retval = SendIFC(boardID)
-
SendLLO(boardID)
retval = SendLLO(boardID)
-
SendList(boardID, addrlist, d...
retval = SendList(boardID, addrlist, databuf, datacnt, eotMode)
-
SendSetup(boardID, addrlist)
retval = SendSetup(boardID, addrlist)
-
SetRWLS(boardID, addrlist)
retval = SetRWLS(boardID, addrlist)
-
TestSRQ(boardID)
-
TestSys(boardID, addrlist)
-
ThreadIbcnt(arg1)
retval = ThreadIbcnt(arg1)
-
ThreadIbcntl(arg1)
retval = ThreadIbcntl(arg1)
-
ThreadIberr(arg1)
retval = ThreadIberr(arg1)
-
ThreadIbsta(arg1)
retval = ThreadIbsta(arg1)
-
Trigger(boardID, addr)
retval = Trigger(boardID, addr)
-
TriggerList(boardID, addrlist...
retval = TriggerList(boardID, addrlist)
-
WaitSRQ(boardID)
-
ibask(ud, option)
-
ibbna(ud, udname)
-
ibcac(ud, v)
-
ibclr(ud)
-
ibcmd(ud, buf, cnt)
-
ibcmda(ud, buf, cnt)
-
ibconfig(ud, option, v)
-
ibdev(ud, pad, sad, tmo, eot,...
-
ibdma(ud, v)
-
ibeos(ud, v)
-
ibeot(ud, v)
-
ibfind(udname)
retval = ibfind(udname)
-
ibgts(ud, v)
-
ibist(ud, v)
-
iblines(ud)
-
ibln(ud, pad, sad)
-
ibloc(ud)
-
ibonl(ud, v)
-
ibpad(ud, v)
-
ibpct(ud)
-
ibpoke(ud, option, v)
-
ibppc(ud, v)
-
ibrd(ud, cnt)
-
ibrda(ud, cnt)
-
ibrdf(ud, filename)
-
ibrpp(ud)
-
ibrsc(ud, v)
-
ibrsp(ud)
-
ibrsv(ud, v)
-
ibsad(ud, v)
-
ibsic(ud)
-
ibsre(ud, v)
-
ibstop(ud)
-
ibtmo(ud, v)
-
ibtrg(ud)
-
ibwait(ud, mask)
-
ibwrt(ud, buf, cnt)
-
ibwrta(ud, buf, cnt)
-
ibwrtf(ud, filename)
-
user_ibcnt()
-
user_ibcntl()
-
user_iberr()
-
user_ibsta()
-
View all files
Lambda-Physik FL3002 GPIB Instrument Drivers
by Thomas Spinka
15 May 2008
(Updated 20 May 2008)
Provides a basic command set to control the FL3001/2 dye laser over GPIB.
|
Watch this File
|
| File Information |
| Description |
Because the Lambda-Physik FL3001 and FL3002 tunable dye lasers are old, they require a protocol that is now outdated. This package includes a stand-alone version of the GPIB dll file interface to a GPIB board, and a set of m-file wrappers to the dll file. This .zip also contains m-files that use this wrapper to communicate with the dye laser itself.
The ReadMe.txt file in the .zip file contains more detailed information. |
| Required Products |
Instrument Control Toolbox
|
| MATLAB release |
MATLAB 7 (R14)
|
| Other requirements |
Windows Platform, tested only in XP, but should work in previous versions. |
|
Tags for This File
|
| Everyone's Tags |
|
| Tags I've Applied |
|
| Add New Tags |
Please login to tag files.
|
|
Contact us at files@mathworks.com
