No BSD License  

Highlights from
Lambda-Physik FL3002 GPIB Instrument Drivers

• AllSpoll(boardID, addrlist) [retval, results] = AllSpoll(boardID, addrlist)
• DevClear(boardID, addr) retval = DevClear(boardID, addr)
• DevClearList(boardID, addrlis... retval = DevClearList(boardID, addrlist)
• DyeLaserAsciiToDec(ConvertInp... This function was written by Tom Spinka on Sept. 28, 2007 for converting
• DyeLaserClose(DyeHandle); Written by Tom Spinka on May 13, 2008 for returning the dye laser to
• DyeLaserConfig(DyeAddr) Written by Tom Spinka on Sept. 26, 2007 for initializing the GPIB board
• DyeLaserDecToAscii(DecIn, Num... Created by Tom Spinka on Sept. 28, 2007 for converting a decimal position
• DyeLaserMoveToWavelength(Wave... Written by Tom Spinka on Sept. 28, 2007 for controlling the grating angle
• DyeLaserRead(BdHandle, DyeHan... Written by Tom Spinka on Sept. 26, 2007 for the control of read
• DyeLaserWrite(BdHandle, DyeHa... Written by Tom Spinka on Sept. 26, 2007 for completing a write operation
• EnableLocal(boardID, addrlist... retval = EnableLocal(boardID, addrlist)
• EnableRemote(boardID, addrlis... retval = EnableRemote(boardID, addrlist)
• FindLstn(boardID, addrlist, l...
• FindRQS(boardID, addrlist) [retval, dev_stat] = FindRQS(boardID, addrlist)
• GPIBBoardConfig(); Written by Tom Spinka on Oct. 3, 2007 for initializing the GPIB board.
• PPoll(boardID)
• PPollConfig(boardID, addr, da... retval = PPollConfig(boardID, addr, dataLine, lineSense)
• PPollUnconfig(boardID, addrli... retval = PPollUnconfig(boardID, addrlist)
• PassControl(boardID, addr) retval = PassControl(boardID, addr)
• RcvRespMsg(boardID, cnt, Term... [retval, buffer] = RcvRespMsg(boardID, cnt, Termination)
• ReadStatusByte(boardID, addr) [retval, result] = ReadStatusByte(boardID, addr)
• Receive(boardID, addr, cnt, T...
• ReceiveSetup(boardID, addr) retval = ReceiveSetup(boardID, addr)
• ResetSys(boardID, addrlist) retval = ResetSys(boardID, addrlist)
• Send(boardID, addr, databuf, ... retval = Send(boardID, addr, databuf, datacnt, eotMode)
• SendCmds(boardID, buffer, cnt... retval = SendCmds(boardID, buffer, cnt)
• SendDataBytes(boardID, buffer... retval = SendDataBytes(boardID, buffer, cnt, eot_mode)
• SendIFC(boardID) retval = SendIFC(boardID)
• SendLLO(boardID) retval = SendLLO(boardID)
• SendList(boardID, addrlist, d... retval = SendList(boardID, addrlist, databuf, datacnt, eotMode)
• SendSetup(boardID, addrlist) retval = SendSetup(boardID, addrlist)
• SetRWLS(boardID, addrlist) retval = SetRWLS(boardID, addrlist)
• TestSRQ(boardID)
• TestSys(boardID, addrlist)
• ThreadIbcnt(arg1) retval = ThreadIbcnt(arg1)
• ThreadIbcntl(arg1) retval = ThreadIbcntl(arg1)
• ThreadIberr(arg1) retval = ThreadIberr(arg1)
• ThreadIbsta(arg1) retval = ThreadIbsta(arg1)
• Trigger(boardID, addr) retval = Trigger(boardID, addr)
• TriggerList(boardID, addrlist... retval = TriggerList(boardID, addrlist)
• WaitSRQ(boardID)
• ibask(ud, option)
• ibbna(ud, udname)
• ibcac(ud, v)
• ibclr(ud)
• ibcmd(ud, buf, cnt)
• ibcmda(ud, buf, cnt)
• ibconfig(ud, option, v)
• ibdev(ud, pad, sad, tmo, eot,...
• ibdma(ud, v)
• ibeos(ud, v)
• ibeot(ud, v)
• ibfind(udname) retval = ibfind(udname)
• ibgts(ud, v)
• ibist(ud, v)
• iblines(ud)
• ibln(ud, pad, sad)
• ibloc(ud)
• ibonl(ud, v)
• ibpad(ud, v)
• ibpct(ud)
• ibpoke(ud, option, v)
• ibppc(ud, v)
• ibrd(ud, cnt)
• ibrda(ud, cnt)
• ibrdf(ud, filename)
• ibrpp(ud)
• ibrsc(ud, v)
• ibrsp(ud)
• ibrsv(ud, v)
• ibsad(ud, v)
• ibsic(ud)
• ibsre(ud, v)
• ibstop(ud)
• ibtmo(ud, v)
• ibtrg(ud)
• ibwait(ud, mask)
• ibwrt(ud, buf, cnt)
• ibwrta(ud, buf, cnt)
• ibwrtf(ud, filename)
• user_ibcnt()
• user_ibcntl()
• user_iberr()
• user_ibsta()
• View all files