Lambda-Physik FL3002 GPIB Instrument Drivers: DyeLaserClose(DyeHandle); - File Exchange

No BSD License

Highlights from
Lambda-Physik FL3002 GPIB Instrument Drivers

AllSpoll(boardID, addrlist) [retval, results] = AllSpoll(boardID, addrlist)
DevClear(boardID, addr) retval = DevClear(boardID, addr)
DevClearList(boardID, addrlis... retval = DevClearList(boardID, addrlist)
DyeLaserAsciiToDec(ConvertInp... This function was written by Tom Spinka on Sept. 28, 2007 for converting
DyeLaserClose(DyeHandle); Written by Tom Spinka on May 13, 2008 for returning the dye laser to
DyeLaserConfig(DyeAddr) Written by Tom Spinka on Sept. 26, 2007 for initializing the GPIB board
DyeLaserDecToAscii(DecIn, Num... Created by Tom Spinka on Sept. 28, 2007 for converting a decimal position
DyeLaserMoveToWavelength(Wave... Written by Tom Spinka on Sept. 28, 2007 for controlling the grating angle
DyeLaserRead(BdHandle, DyeHan... Written by Tom Spinka on Sept. 26, 2007 for the control of read
DyeLaserWrite(BdHandle, DyeHa... Written by Tom Spinka on Sept. 26, 2007 for completing a write operation
EnableLocal(boardID, addrlist... retval = EnableLocal(boardID, addrlist)
EnableRemote(boardID, addrlis... retval = EnableRemote(boardID, addrlist)
FindLstn(boardID, addrlist, l...
FindRQS(boardID, addrlist) [retval, dev_stat] = FindRQS(boardID, addrlist)
GPIBBoardConfig(); Written by Tom Spinka on Oct. 3, 2007 for initializing the GPIB board.
PPoll(boardID)
PPollConfig(boardID, addr, da... retval = PPollConfig(boardID, addr, dataLine, lineSense)
PPollUnconfig(boardID, addrli... retval = PPollUnconfig(boardID, addrlist)
PassControl(boardID, addr) retval = PassControl(boardID, addr)
RcvRespMsg(boardID, cnt, Term... [retval, buffer] = RcvRespMsg(boardID, cnt, Termination)
ReadStatusByte(boardID, addr) [retval, result] = ReadStatusByte(boardID, addr)
Receive(boardID, addr, cnt, T...
ReceiveSetup(boardID, addr) retval = ReceiveSetup(boardID, addr)
ResetSys(boardID, addrlist) retval = ResetSys(boardID, addrlist)
Send(boardID, addr, databuf, ... retval = Send(boardID, addr, databuf, datacnt, eotMode)
SendCmds(boardID, buffer, cnt... retval = SendCmds(boardID, buffer, cnt)
SendDataBytes(boardID, buffer... retval = SendDataBytes(boardID, buffer, cnt, eot_mode)
SendIFC(boardID) retval = SendIFC(boardID)
SendLLO(boardID) retval = SendLLO(boardID)
SendList(boardID, addrlist, d... retval = SendList(boardID, addrlist, databuf, datacnt, eotMode)
SendSetup(boardID, addrlist) retval = SendSetup(boardID, addrlist)
SetRWLS(boardID, addrlist) retval = SetRWLS(boardID, addrlist)
TestSRQ(boardID)
TestSys(boardID, addrlist)
ThreadIbcnt(arg1) retval = ThreadIbcnt(arg1)
ThreadIbcntl(arg1) retval = ThreadIbcntl(arg1)
ThreadIberr(arg1) retval = ThreadIberr(arg1)
ThreadIbsta(arg1) retval = ThreadIbsta(arg1)
Trigger(boardID, addr) retval = Trigger(boardID, addr)
TriggerList(boardID, addrlist... retval = TriggerList(boardID, addrlist)
WaitSRQ(boardID)
ibask(ud, option)
ibbna(ud, udname)
ibcac(ud, v)
ibclr(ud)
ibcmd(ud, buf, cnt)
ibcmda(ud, buf, cnt)
ibconfig(ud, option, v)
ibdev(ud, pad, sad, tmo, eot,...
ibdma(ud, v)
ibeos(ud, v)
ibeot(ud, v)
ibfind(udname) retval = ibfind(udname)
ibgts(ud, v)
ibist(ud, v)
iblines(ud)
ibln(ud, pad, sad)
ibloc(ud)
ibonl(ud, v)
ibpad(ud, v)
ibpct(ud)
ibpoke(ud, option, v)
ibppc(ud, v)
ibrd(ud, cnt)
ibrda(ud, cnt)
ibrdf(ud, filename)
ibrpp(ud)
ibrsc(ud, v)
ibrsp(ud)
ibrsv(ud, v)
ibsad(ud, v)
ibsic(ud)
ibsre(ud, v)
ibstop(ud)
ibtmo(ud, v)
ibtrg(ud)
ibwait(ud, mask)
ibwrt(ud, buf, cnt)
ibwrta(ud, buf, cnt)
ibwrtf(ud, filename)
user_ibcnt()
user_ibcntl()
user_iberr()
user_ibsta()
View all files

from Lambda-Physik FL3002 GPIB Instrument Drivers by Thomas Spinka
Provides a basic command set to control the FL3001/2 dye laser over GPIB.

DyeLaserClose(DyeHandle);
% Written by Tom Spinka on May 13, 2008 for returning the dye laser to % front panel control. function [Err] = DyeLaserClose(DyeHandle); Err = ibloc(DyeHandle);

Highlights from Lambda-Physik FL3002 GPIB Instrument Drivers

Highlights from
Lambda-Physik FL3002 GPIB Instrument Drivers