Phased Array Design Toolbox v2.5
10 Feb 2009
12 Apr 2015)
A toolbox allowing rapid definition and evaluation of 2D and 3D phased array antennas.
% LEAST MEAN SQUARE OPTIMISATION (exlms1)
% This type of optimisation / beam synthesis is used to steer the array's
% main lobe in the direction of the wanted signal and place nulls in the
% direction of the interferers.
% This example is for an 8 element array with a wanted signal at theta=10,phi=0
% and 2 interferers at theta=50,phi=0 and theta=-10,phi=0. See inside this file
% for details.
% This method relies on knowing in advance the direction of the desired signals
% and interferers. It is not an Angle Of Arrival (AOA) estimation algorithm.
% This example and the code in lmsoptimise.m function (beam_synthesis directory)
% has been adapted for ArrayCalc from 'Smart Antennas for Wireless Communications
% with Matlab' by Frank Gross, published by McGraw-Hill.
init; % Initialise global variables
lambda=3e8/freq_config; % Calculate wavelength
% Array Parameters
M=8; % Number of elements in X-direction
N=1; % Number of elements in Y-direction
xspc=0.5; % Array spacing in the X-direction
yspc=0.5; % Array spacing in the Y-direction
rect_array(M,N,xspc*lambda,yspc*lambda,'iso',0); % Construct 1st (M by N) Array
signal=[10,0]; % Wanted signal direction [theta,phi]
inter1=[50,0]; % Direction of interferer #1 [theta,phi]
inter2=[-10,0]; % Direction of interferer #2 [theta,phi]
mu=0.01; % Step size for optimisation