Code covered by the BSD License  

Highlights from
Measure radio frequency power using MATLAB and an RF power meter

5.0

5.0 | 1 rating Rate this file 17 Downloads (last 30 days) File Size: 2.32 KB File ID: #29592
image thumbnail

Measure radio frequency power using MATLAB and an RF power meter

by

 

MATLAB example to make RF Power measurements using an Agilent RF Power Meter

| Watch this File

File Information
Description

MATLAB is a software environment and programming language with over 1,000,000 users. MATLAB extends the functionality of Agilent instruments by enabling you to make application-specific and/or automated measurements and tests.

This example shows you how you can use MATLAB to control an Agilent RF Power Meter, make measurements, and retrieve the data into MATLAB and calculate a mean value of the measurements. The user can customize the code to set the IP address of their RF Power Meter, set the channel measurement offsets, etc. For more information on the SCPI commands used to control the instrument, refer to your instrument's programmer's guide.

To execute this example, type ‘[channelCPower, channelDPower] = readPowerMeter()’ in the MATLAB command window. Note: Change the IP address in the readPowerMeter.m file to the IP address of the instrument.

This MATLAB example has been tested using a Agilent N1914A RF Power Meter.

To request your free trial of MATLAB and/or Instrument Control Toolbox, visit http://www.mathworks.com/agilent/instrument/tryit.html

Required Products Instrument Control Toolbox
MATLAB release MATLAB 7.10 (R2010a)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (1)
29 Jul 2014 Stacy

Awesome, thank you! You saved me a ton of work and I really appreciate the comments in the code. I have learned a lot just by reading through the code.

Contact us