Code covered by the BSD License  

Download apps, toolboxes, and other File Exchange content using Add-On Explorer in MATLAB.

» Watch video

Highlights from
OPTIMIZED OVER CURRENT RELAY CO-ORDINATION

4.25
4.2 | 4 ratings Rate this file 23 Downloads (last 30 days) File Size: 801 KB File ID: #30336 Version: 1.0

OPTIMIZED OVER CURRENT RELAY CO-ORDINATION

by

 

Finds optimum TDS and PSM settings for Over-Current relays.

| Watch this File

File Information
Description

When a fault occurs in any portion of the power system network, the primary relay must act first. But to be on the safer side a 'Back-Up' relay to the 'Primary' relay is also provided with a proper discrimination time in their operation. Discrimination time is provided so as to allow the primary relay to act first. In case if it fails, then the back-up relay acts. This is done so as to isolate the healthy portion from the faulty portion.

Time of operation is basically determined by the following relay settings:
1. Plug Setting Multiplier (PSM), and,
2. Time Dial Setting (TDS)
So for a given fault current we have a desired 'Time of Operation' for both the primary as well as back up relay.
But, since the settings available are often discrete, so obtaining desired time of operation is not always possible.Then by using trial and error we need to choose PSM and TDS, which is not always the optimum choice.

This small simple MATLAB code, finds the optimum set of PSM and TDS so as to give the best possible time of operation to the relay.

This code is only a representation to the algorithm I have used. I have considered 7SJ61 Numerical OC Relay settings as an example in the code.

The Inputs are stored in 'INPUTS.xls' and MATLAB reads data from it. The output is stored in 'OUTPUT.xls'

I have considered a small margin to get a flexibility in the choice of PSM. It is known as Over Load Factor. Also I have considered the discrimination time between primary and backup relay to be 0.3 seconds.

For any further suggestion or query please mail me at:
abhishek.ckbty@gmail.com
or contact me at:
00 91 7829 000 165

MATLAB release MATLAB 7 (R14)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (5)
04 May 2016 pk jadav

plase give me if you have program for relay coordination using genetic algorithams

Comment only
28 Mar 2016 Sulistio Widi Anantio

hopefully this file will help me to finish my school-project about OCR setting with fuzzy logic, thank you

16 Oct 2015 Housam

Housam (view profile)

 
15 Feb 2013 hossam

hossam (view profile)

it is very fantastic

10 Mar 2011 Erdal Bizkevelci  

Contact us