fastBSpline - A fast, lightweight class that implements
non-uniform B splines of any order
Matlab's spline functions are very general. This generality comes at
the price of speed. For large-scale applications, including model
fitting where some components of the model are defined in terms of
splines, such as generalized additive models, a faster solution is
The fastBSpline class implements a lightweight set of B-spline
features, including evaluation, differentiation, and parameter fitting.
The hard work is done by C code, resulting in up to 10x acceleration
for evaluating splines and up to 50x acceleration when evaluating
of spline derivatives.
Nevertheless, fastBSplines are manipulated using an intuitive, high-
level object-oriented interface, thus allowing C-level performance
without the messiness. Use CompileMexFiles to compile the required
files. If mex files are not available, evaluation will be done in .m
code, so you may still use the code if you can't use a compiler for your
B splines are defined in terms of basis functions:
y(x) = sum_i B_i(x,knots)*weights_i
B (the basis) is defined in terms of knots, a non-decreasing sequence
of values. Each basis function is a piecewise polynomial of order
length(knots)-length(weights)-1. The most commonly used B-spline is
the cubic B-spline. In that case there are 4 more knots than there
are weights. Another commonly used B-spline is the linear B-spline,
whose basis function are shaped like tents, and whose application
results in piecewise linear interpolation.
The class offers two static functions to fit the weights of a spline:
lsqspline and pspline. It includes facilities for computing the basis
B and the derivatives of the spline at all points.
sp = fastBSpline(knots,weights);
%Fit a noisy measurement with a smoothness-penalized spline (p-spline)
x = (0:.5:10)';
y = sin(x*pi*.41-.9)+randn(size(x))*.2;
knots = [0,0,0,0:.5:10,10,10,10];
%Notice there are as many knots as observations
%Because there are so many knots, this is an exact interpolant
sp1 = fastBSpline.lsqspline(knots,3,x,y);
%Fit penalized on the smoothness of the spline
sp2 = fastBSpline.pspline(knots,3,x,y,.7);
rg = -2:.005:12;
outOfRange - Determines how the spline is extrapolated outside the
range of the knots
knots - The knots of the spline (read only)
weights - The weights of the spline (read only)
fastBSpline - Construct a B spline from weights at the knots
lsqspline - Construct a least-squares spline from noisy measurements
pspline - Construct a smoothness-penalized spline from noisy
evalAt - Evaluate a spline at the given points
getBasis - Get the values of the underlying basis at the given points
Btimesy - Evaluate the product getBasis(x)'*y
dx - Returns another fastBSpline object which computes the derivative of
the original spline
Disclaimer: fastBSpline is not meant to replace Matlab's spline functions;
it does not include any code from the Mathworks
For Compilation under Linux it might be useful:
function  = CompileMexFiles()
%Compiles mex files that accelerate B-spline evaluation
mex -v CFLAGS="$CFLAGS -std=c99" evalBin.c
mex -v CFLAGS="$CFLAGS -std=c99" evalBSpline.c
mex -v CFLAGS="$CFLAGS -std=c99" evalBinTimesY.c
How to obtain for 3D spline tensor products? would make a sample? thanks
This class is excellent. The compilation on my 64 bit machine running Matlab R2012b worked after (1) downloading Microsoft SDK 7.1 (2) renaming all files ending in .c to .ccp, both in the directory and all references contained within the .c files. Great work!
Could you kindly provide a sample code for 2D/3D spline using tensor product. I believe that will further promote your code and enlarge your contributions to the society. Thank you!
These are 1d splines. You can obtain 2d/3d splines using tensor products of the basis given by the class.
This is 2D case only?
Is there parametrized interpolation like evalAt(t=0...1)?
It fails in general, for messy points x=[0; 6 ; 3 ; 12; 8] and y=[0;-3; 6; 12; 0]?
If I am not wrong, it works similar as function provided with Matlab...
If You could extend such possibilities in 3D - it would be great, because Matlab is lacking with CAD features.
Richard has sent me an email with this solution for his problems which stem from using a different compiler (VC++ on Windows rather than gcc on Linux):
"Under Windows it is important that all files have the ending .cpp instead of .c so that the right compiler is taken. After correcting that (*.c à *.cpp) and stepping through all calls of .c files in the code which also have to be corrected, of course, everything works perfect!"
Like Martijn I cannot compile on a 64bit machine. Same error messages.
I get a long list of syntax errors when trying to compile on x64. I have not tried 32.
evalBin.c(98) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(99) : error C2065: 'x_ptr' : undeclared identifier
evalBin.c(99) : warning C4047: 'function' : 'const mxArray *' differs in levels of indirection from 'int'
evalBin.c(99) : warning C4024: 'mexmetypecheck' : different types for formal and actual parameter 1
evalBin.c(100) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(101) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(102) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(103) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(104) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(105) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(106) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(107) : error C2143: syntax error : missing ';' before 'const'
evalBin.c(108) : error C2065: 'firstknot_ptr' : undeclared identifier
Added mex acceleration, removed separate uniform B-spline implementation