Code covered by the BSD License  

Highlights from
Adaptive Neuro-Fuzzy Inference Systems (ANFIS) Library for Simulink

4.3

4.3 | 15 ratings Rate this file 142 Downloads (last 30 days) File Size: 747 KB File ID: #36098
image thumbnail

Adaptive Neuro-Fuzzy Inference Systems (ANFIS) Library for Simulink

by

 

09 Apr 2012 (Updated )

This Simulink library contains six ANFIS/CANFIS system variations.

| Watch this File

File Information
Description

This library is for those who want to use the ANFIS/CANFIS system in the Simulink environment. Each model is implemented for training and operation in a sample-by-sample, on-line mode. For details see the included release notes. The main reference used to develop all the ANFIS/CANFIS models is:
Neuro-Fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence, Jyh-Shing Roger Jang, Chuen-Tsai Sun, Eiji Mizutani. Prentice Hall, Sept. 1997.

Acknowledgements

Ann and Fuzzy Art And Fuzzy Artmap Neural Networks inspired this file.

Required Products Simulink
MATLAB
MATLAB release MATLAB 7.13 (R2011b)
Other requirements Fuzzy Logic Toolbox is required for running some demos.
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (34)
23 Nov 2014 Ilias Konsoulas

@ In-hwan. Yes, they are the same. You must compile combinem.c with mex and then call this function with same arguments as with comb that appears in grad_check_anfis_grid.m. Good Luck.

23 Nov 2014 In-hwan

Thank you for your prompt response. ^^

But i can't find the "comb.c" file in your zip files.
Do you mean that "combinem.c" file is same with the "comb.c" file???

or I should find "comb.c" file for myself???

21 Nov 2014 Ilias Konsoulas

@ In-hwan. This message appears because you haven't compiled the comb.c file to an mex executable using the mex command. Apply the mex command to the given comb.c source file and then you are ready to proceed with your simulations. Function comb.c was implemented in C for faster execution. Good Luck.

21 Nov 2014 In-hwan

When i run the file "grad_check_anfis.m"
an error happens on the function "comb()"

the error message is:
=============================
Undefined function 'comb' for input arguments of type 'double'.

Error in grad_check_anfis_grid (line 116)
precond = comb(Out1);
=============================
How can i find a file defining the function "comb()"??

26 Sep 2014 Ilias Konsoulas

@ Junho.

When you run a demo for the very first time you must comment the line "load anfis_scatter_states.mat" or similar. In the "Initial States" entry you must enter a zero indicating you start training from scratch. When the first simulation session is complete, the anfis_scatter_states.mat has been generated in the current directory. Then you must uncomment the line "load anfis_scatter_states.mat". When you bouble click the box the learned states are loaded on the workspace. Then, in the "Initial States" entry of the form, you must enter the name of the variable (matrix) that contains the learned states.

25 Sep 2014 Junho

Dear Ilias,

I was following your manual to test your ANFIS demo version to see how ANFIS works. I'm pretty sure I fellow your direction correctly but it still makes me little confused of getting ~~.mat file. First, right click and go to properties of "Double-Click to load MG Data and ANFIS States" and open "OpenFcn*" inside Callbacks tab. Then comment % "load anfis_scatter.mat" and double-click the MG data box itself. After this part, I run this program to get "anfis_scatter.mat" but it never works for me. It keeps giving me an error "anfis_scatter_states is undefined". From your guide, I have to enter the name of variable under "Initial ANFIS States" but I really have no idea which variable I have to put in to get ~~.mat file. If you don't mind, Could you give me an advise of your program?

03 Aug 2014 NIPAPORN

Thanks

24 Jul 2014 Ilias Konsoulas

@ mohand Ali and @ Marc O' Polo: Is the folder containing all the ANFIS/CANFIS files in your MatLab path ?

24 Jul 2014 mohand Ali

Dear Marc O'Polo

I have same your problem
Error in S-function 'ANFIS_Grid_MG/ANFIS (Grid)/ANFIS': S-Function 'anfisim_grid' does not exist

if you find solve to this problem , kindly inform me

15 Jul 2014 Marc O'Polo

Dear Ilias,
Thank you for the toolbox. However, I am getting the following error:
Error in S-function 'ANFIS_Grid_MG/ANFIS (Grid)/ANFIS': S-Function 'anfisim_grid' does not exist
This happens with any of the other blocks as well. Any help is much appreciated.

10 Jul 2014 khaild

the work is wonderful,thank you very much.

07 Jul 2014 ali khodaparasti

hello
I do not have Adaptive Neuro-Fuzzy Inference Systems (ANFIS) Library in my simulink library.
what should I do?

16 Jun 2014 khaild  
06 Jun 2014 Ilias Konsoulas

@Mohamed: Ok, thanks for the feedback. The bug was fixed. You may run every model with a single input signal form now on.

03 Jun 2014 Mohamed abo el ella

can we use the anfis scatter with only one input because an error appears

17 Apr 2014 Mahamadou Diarra  
21 Jan 2014 Ilias Konsoulas

Roby, this is a problem caused by a malfunctioning (or non-existent) Signal Procesing Blockset. For more info, have a look here: http://www.mathworks.com/matlabcentral/newsreader/view_thread/103155 . Good Luck.

21 Jan 2014 roby jangam

Thank you sir
I do what ever you tell me but there is also another error is come

Failed to load library 'dspstat3' referenced by 'CANFIS_ART_Lorenz/RMS'

Caused by:
Unable to load block diagram 'dspstat3'

21 Jan 2014 roby jangam  
28 Dec 2013 Ilias Konsoulas

Roby, right-click on the block named "Double-click to load Lorenz Attractor Data". Select Block Properties -> Callbacks -> OpenFcn. There, together with other commands, add the following definition: sim_time = 2000; Also, note that in Simulation/Configuration Parameters/Stop Time enter: sim_time. And you're done.

27 Dec 2013 roby jangam

i have a problem with CANFIS_ART_Lorenz.mdl

Error evaluating expression 'sim_time' for 'Stop time' specified in the Configuration Parameters dialog for block diagram 'CANFIS_ART_Lorenz': Undefined function or variable 'sim_time'.

so kindly please help me

27 Dec 2013 roby jangam  
19 Nov 2013 Lejla BM

Thank you for your ANFIS and RFNN tools. It is very intresting work!

Fahrudin and Lejla

26 Aug 2013 Vesna Ojleska

Nice work.
Thank you.

19 Jul 2013 Ilias Konsoulas

Please note that the recently added feature of "gradient consistency checking" is introduced in par. 7.2 of the latest version of the NFA library user's manual.

12 Feb 2013 Mohamed abo el ella

Dear Mr. Ilias Konsoulas

i have a problem with CANFIS_SCATTER
as when i enter two inputs with two error signals to get 2 outputs using MUX block it gives me an error during running by "Index exceeds matrix dimensions."

29 Dec 2012 nazar dikhil

please can I get the matlab code of anfismex function

21 Nov 2012 Sally

Dear Mr.Ilias Konsoulas,
Thank you so much for your help.

24 Oct 2012 Ilias Konsoulas

To Sally and others: In the updated version of the NFA User's Manual, a new section has been added describing how to run successfully the demos on your computer. Good Luck and thanks for your patience.

02 Oct 2012 Ilias Konsoulas

Ok, in the next few days I'll add a new section on the user's guide: "NFA User's Manual v2.pdf"
to describe in more detail how to run successfully the demos. Just wait a little bit. Thanks.

29 Sep 2012 Sally

Dear Ilias Konsoulas,

Thanks for introducing the useful ANFIS library. I tried to run the demo programs but still gave me errors. Can you help me how to run that demos, Thank you so much.

05 Jul 2012 Ilias Konsoulas

Quick fix: rename library file NFA.mdl to NFA_matlab.mdl .

04 Jul 2012 Ahmet

doesnt exist NFA_matlab

04 Jul 2012 Ahmet

tying to run demo models gives erros as:

*Failed to load library 'NFA_matlab' referenced by 'ANFIS_Grid_MG/ANFIS (Grid)'
*Unable to load block diagram 'NFA_matlab'

How can i fix this? please help.

Thanks

Updates
10 Apr 2012

I have updated only the following form entries: a)Description, b)Tags c) Acknowledgement of other submissions.

23 Apr 2012

Minor code changes, better comments and NFA User Guide corrections.

09 Jul 2012

OK, I corrected the name of the library file from NFA.mdl to NFA_matlab.mdl in order to make demos runnable.

24 Oct 2012

In the latest version of the users guide, I have included a new section describing how to make the demos runnable on your computer and briefly outlining what each demo is about.

09 Jul 2013

Introduced the method of gradient consistency checking. This assures the correctness of your backprop implementation. I also provided .m scripts that perform gradient checking to all (C)ANFIS functions of this library.

06 Jun 2014

Fixed a bug in anfisim_scatter.m that prevented run with a single input. All models were tested for single input run successfully.

Contact us