AQ6317B OSA Capture with Prologix GPIB-USB
Runs a single trace on an ANDO OSA connected via Prologix GPIB-USB controller.
You are now following this Submission
- You will see updates in your followed content feed
- You may receive emails, depending on your communication preferences
OSA_Prologix.m runs and plots a single scan based on current settings of
the ANDO AQ6317B.
Connection is based on the COM (USB Serial Port) identified in the
Prologix GPIB Configurator. See here:
http://www.ke5fx.com/gpib/readme.htm#prologix
Ensure your OSA and Prologix devices are set to the same GPIB address.
TIP:
Compile to standalone application for faster performance using:
mcc -m OSA_Prologix
Tested using Prologix GPIB-USB Controller 6.101.
Cite As
Priyanth Mehta (2026). AQ6317B OSA Capture with Prologix GPIB-USB (https://www.mathworks.com/matlabcentral/fileexchange/36264-aq6317b-osa-capture-with-prologix-gpib-usb), MATLAB Central File Exchange. Retrieved .
Acknowledgements
Inspired by: getOSATrace
Categories
Find more on Instrument Control Toolbox Supported Hardware in Help Center and MATLAB Answers
General Information
- Version 1.0.0.0 (1.81 KB)
MATLAB Release Compatibility
- Compatible with any release
Platform Compatibility
- Windows
- macOS
- Linux
| Version | Published | Release Notes | Action |
|---|---|---|---|
| 1.0.0.0 |
