4.0

4.0 | 2 ratings Rate this file 89 Downloads (last 30 days) File Size: 13.9 KB File ID: #38105
image thumbnail

grid energy storage battery

by

 

this circuit was built to simulate energy storage at the low voltage network.

| Watch this File

File Information
Description

the grid is simulated by a 3 phase source, rest of the system by a constant RL load. A 13kV/240V step down transformer supplies a community represented by the grey block. data (24 hrs duration) is fed to this block by the look-up tables. THE GRID PART WORKS.

the storage section (in blue) has a rectifier and inverter part which switch on and off depending on grid voltage. I seem to be getting an error (as shown on the screenshot) and cant seem to figure out the real problem.

Any help would be greatly appreciated.

PS: I cant upload the data file along so I've posted it separately. Will add the link as soon as its been cleared for posting.

Required Products SimPowerSystems
MATLAB release MATLAB 7.12 (R2011a)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (6)
02 Aug 2014 youssef ahmad

after data file ... i have this problem error :
Error in port widths or dimensions. Output port 1 of 'GridStorageBatt/powergui/EquivalentModel1/Gates/From2' has 2 elements. This port does not accept the dimensions (or orientation) specified by the output signal.

Error in port widths or dimensions. Invalid dimension has been specified for input port 2 of 'GridStorageBatt/powergui/EquivalentModel1/Gates/Mux'.

05 Mar 2014 man3ref

Hey,
only delete your comparison after "From A" (Bottom of the model)

05 Nov 2013 Nikhil

I am getting the following error on running:-
Error in port widths or dimensions. Output port 1 of 'GridStorageBatt/powergui/EquivalentModel1/Gates/From2' has 2 elements. This port does not accept the dimensions (or orientation) specified by the output signal.it.

Any help would be appreciated.

30 Sep 2013 Meer  
15 Sep 2012 cr28

ok i figured out the problem. the mux is the source of the problem. I still get random results from the run

11 Sep 2012 cr28

link to the data file;
http://www.mathworks.com/matlabcentral/fileexchange/38106

Contact us