Be the first to rate this file! 13 Downloads (last 30 days) File Size: 36.7 KB File ID: #39542
image thumbnail

This is updated code for full car suspension analysis with 8 dof

by

 

Updated code with 8 dof

| Watch this File

File Information
Description

I have given values with this to check the model...
k_1=18760;
k_3=18760;
k_2=37520.28;
k_4=32000;
c_1=900;
c_2=936;
c_3=900;
c_4=936;
M=1000;
m_1=85;
m_2=60;
m_3=85;
m_4=60;
I_x=1000;
I_y=1000;
k_t=150000;
c_t=2000;
a=1.07;
b=1.32;
w=3;
F_1=0;
F_2=0;
F_3=0;
F_4=0;
k_p=10000;
c_p=400;
x_p=0.234;
y_p=0.375;
m_p=100;
Plz update and plz comment

Required Products Simulink
MATLAB
MATLAB release MATLAB 7.10 (R2010a)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (3)
02 Feb 2014 sh

as u run the code it will give this error:
Warning: Unable to reduce the step size without violating minimum step size of
1.4210854715202004E-14 for 1 consecutive times at time 4.0000000000000142. Continuing
simulation with the step size restricted to 1.4210854715202004E-14 and using an effective
relative error tolerance of 0.013523809523641055, which is greater than the specified
relative error tolerance of 0.001. This usually may be caused by the high stiffness of the
system. Please check the model 'fullcar123' or increase the Max consecutive min step size
violation parameter in the solver configuration panel

24 Jan 2013 Tong

The model does not work because of unsufficient of inputs data.

04 Jan 2013 Chegireddy Venkateswara Reddy

Plz comment on this, let me know is it working fine or not.....

Contact us