No BSD License  

4.35294

4.4 | 18 ratings Rate this file 27 Downloads (last 30 days) File Size: 33.3 KB File ID: #766
image thumbnail

HiperLAN/2 reference model

by

 

20 Sep 2001 (Updated )

16-QAM modulation and demodulation with channel coding

| Watch this File

File Information
Description

HiperLAN/2 is a European (ETSI) standard for high-rate wireless LANs, based on OFDM, operating in the 5GHz band and offering raw data rates up to 54Mbit/s. At the PHY layer it is very similar to IEEE 802.11a. This is a reference model showing TX side coding and modulation for the 16QAM, 3/4 code rate mode, with a corresponding ideal receiver chain and AWGN channel. The model is a good example of the use of frame-based processing in Simulink simulations as the OFDM symbols provide a natural frame size for the model.

Reference: ETSI TS 101 475 V1.2.2 (2001-02) Broadband Radio Access Networks (BRAN): HIPERLAN Type 2: Physical (PHY) Layer

Required Products Simulink
CDMA Reference Blockset
Communications System Toolbox
DSP System Toolbox
Signal Processing Toolbox
MATLAB release MATLAB 6.1 (R12.1)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (24)
29 Oct 2013 Aws  
27 May 2009 PrzemysBaw asdfad

This standard is 54Mbps or is it 36Mbps??

I thought that in 16QAM with 3/4 code rate mode offering raw data rates i up to 36Mbit/s, not 54Mbps

02 Sep 2008 Kazumasa Kaneko  
19 Aug 2008 Nony Orji

Hi I used this model and it really sent some positive signal to me. I’m working on a project which has to with modeling and simulation of 802.11a and I find your work so similar to what I want to do. PLEASE can you send me documentation or guide on how to do my project. Thanks.

16 Jun 2008 Anna waloszczyk  
01 Jun 2008 martin felipe

muy buena simulacion

30 Aug 2007 fuzy s

Would you please send documentation or full report to completely understand the simulation. Thanks bro.

05 Jun 2007 RANA JAVAID IQBAL

I M STUDENT AND SIMULATING OFDM SYSTEM I WOULD BE VERY MUCH THANK FULL IF U HELP ME IN THIS SIMULATION MODEL
DOOOOOO REPLY SOOOOOOON

30 Nov 2006 Pushpendra Chahar

nice

08 Oct 2006 jayanta banik

i m a student of embedded systems, i m studing on hyperlan2 , i have design on new convolution .at the conclusion , i can say that snr should be high ,so that ber shoul be zero.sir, can u plz tell me what would be the main objective or abstrat .i willl be great ful if u reaply me very soon.

with regards,
jayanta banik

31 May 2006 odri odri  
03 Mar 2006 shilpi banerjee

Sir,
Ur design is really good .Actally I want 2 design a channel estimator after the OFDM receiver block.So,can u kindly e-mail me the relevant documentation for ur design as it is required in my design.
Thanks.

12 Dec 2005 saad sari

Dear Sir

I'm sending this mail hoping will get the helpful reply to my question, or at least redirect me to who can help with that!

I'm using the hiperlan2 file at the demos of the simulink MATLAB.
the output of this file is OFDM signal with 16QAM mapping at baseband.

My question is that, if I want to upconvert this output to a higher frequency as RF within the MATLAB, how can I do so!!!!????? as I need to upconvert the OFDM signal to an RF frequency and use it at some other applications!!

Please let me know if you kan help me with this as soon as possible.... Many Thanks.

With Best Regards,

Saad.

19 Dec 2004 anna tomas

Hi i used this model first time and it really facinate me a lot. could u guide me how can i desigh this model by my own as i want to implement in my simulations. Can you please e-mail me your code and relevant documentation so I can better understand exactly what you have done and how it works. Thanks a lot.

28 Oct 2004 khurram sidiqqui

Hi i used this model first time and it really facinate me a lot. could u guide me how can i desigh this model by my own as i want to implement in my simulations

17 Jul 2004 Rajeev Garg

I started working on 5GHZ WLAN standards and need to develop my own reference hiperlan2 model so if you could e-mail me your code and relevant documentation so I can better understand exactly what you have done and how it works will be highly apprecaited.

01 Jul 2004 howe tian

I have download your code, but i can see nothing when open the mdl file.please tell me reason.
I would be grateful if you could e-mail me your code and relevant documentation so I can better understand exactly what you have done and how it works

28 Nov 2003 justin xiang

I am interested in OFDM and 802.11a

21 Aug 2003 JIN jsd

i am interesting OFDM

29 Jan 2003 Miguel Angel Berzosa Losada

I think the results are not correct because of the puncture and insert zero block. I´ve made a model very close to it using another PHY mode (with no puncture and with 9/16 puncture) and I get good results:for example, in 16QAM 9/16 puncture, BER=2.33e-6 for SNR=19 dB. I´m trying the same configuration, but changing the puncture vector for 3/4 and BER is around 0.5.

12 Nov 2002

As a reference quite nice, but the IDFT/DFT is wrong implemented (the standard does not use the weighting factor 1/64 in the IDFT but in the DFT!) and the model is not suitable for low SNRs (real signal power in HiperLAN2 is 200mW) as the Viterbi decoder produces errors

28 Aug 2002 Victor Fong  
02 Apr 2002 Shing Tenqchen  
18 Mar 2002  

Contact us