Rank: 98763 based on 0 downloads (last 30 days) and 0 file submitted
photo

Didem

E-mail
Company/University
EMU

Personal Profile:

 

Watch this Author's files

 

Comments and Ratings by Didem View all
Updated File Comments Rating
07 Jun 2011 Embedded Coder Robot NXT Demo Offers an enjoyable Model-Based Design experience using Simulink models with Lego robots Author: Takashi Chikamasa

### Executing GNU-ARM toolchain for building executable ... and nothing else for long time. Test for motors was working but that code is not working. What can I do?

10 May 2011 ECRobotInstaller – Simplified installation of tools for Embedded Coder Robot Simplifies the installation of ECRobot, a Simulink platform for LEGO Mindstorms NXT code generation Author: Gautam Vallabha

I still receive error messages:
================ 10-May-2011 20:02:52 Configuring ECRobot
ECRobot version 3.17 or later detected
### Start verifying Embedded Coder Robot NXT installations...
### Verifying cygwin make 3.81: OK
Problem with automatic configuration of ECRobot

Install cancelled
??? Error using ==> ecrobotnxtsetup>PromptBasedSetUp at 188
ERROR: GNUARM path or version (must be 4.0.2) might be wrong.

Error in ==> ecrobotnxtsetup>PromptBasedSetUp at 188
error('ERROR: GNUARM path or version (must be 4.0.2) might be
wrong.');

Error in ==> ecrobotnxtsetup at 60
[cygwin_bin_dir, gnuarm_root_dir, nexttool_root_dir] = ...

Error in ==> install_ecrobot_tools>configure_ecrobot at 420
ecrobotnxtsetup(cygwin_bin_dir, gnuarm_dir, nexttool_dir);

Error in ==> install_ecrobot_tools at 75
configure_ecrobot(config);

and when I try to run test is gives error:
Error executing callback 'ClickFcn'
Error using ==> nxtbuild at 121
ecrobotnxtsetupinfo.m does not exist in environment directory. Execute ecrobotnxtsetup.m to specify necessity information.

I executed ecrobotnxtsetup.m and then I receive message:
>> ecrobotnxtsetup
### Start verifying Embedded Coder Robot NXT installations...
### cygwin/bin path: C:/cygwin/bin
### Verifying cygwin make 3.81: OK
### GNUARM path: C:/LegoMindstorms/GNU_ARM_Compiler/bin
??? Error using ==> ecrobotnxtsetup>GuiBasedSetUp at 139
ERROR: GNUARM path or version (must be 4.0.2) might be wrong.

Error in ==> ecrobotnxtsetup at 52
[cygwin_bin_dir, gnuarm_root_dir, nexttool_root_dir] = ...

There was a warning, may be it has some connections:================ 10-May-2011 19:58:25 Starting NXT OSEK installation
zip file = C:\ecrobot_installer_v1_37\ECRobotDownloads\nxtOSEK.zip
install dir = c:\LegoMindstorms\ECRobot\\ecrobotNXT\environment\ Warning: Permission denied to create file "c:\LegoMindstorms\ECRobot\\ecrobotNXT\environment\nxtOSEK\samples_c++\cc\sprite_devl\sprite.suo".
> In iofun\private\extractArchive>extractArchiveEntry at 108
In iofun\private\extractArchive at 52
In unzip at 98
In install_ecrobot_tools>do_unzip at 448
In install_ecrobot_tools>install_nxtosek at 351
In install_ecrobot_tools at 69
Unzipped 1989 files

10 May 2011 ECRobotInstaller – Simplified installation of tools for Embedded Coder Robot Simplifies the installation of ECRobot, a Simulink platform for LEGO Mindstorms NXT code generation Author: Gautam Vallabha

Hi

I am getting GNU ARM compiler and Cywing base packets errors. I checked above suggestions but didn't work...

I run CHECK_ECROBOT_TOOLS and it shows this two problem. Can you please help!?

Contact us