Rank: 442930 based on 0 downloads (last 30 days) and 0 file submitted
photo

Useok

E-mail

Personal Profile:

 

Watch this Author's files

 

Comments and Ratings by Useok View all
Updated File Comments Rating
21 May 2014 Simulink Support Package for Arduino Due Hardware Student-priced microcontroller board Author: MathWorks Simulink Team

I installed this package on 2014a.
But after I click the deploy button of getting started example model it shows an error regarding 'arm-none-eabi-gcc.exe' and stopped compiling.

It shows same error on the other computer.
Is there any guy suffering from this problem? or is there any solutions?

Diagnostic viewer of Matlab shows this:

<Code Generation>

The call to realtime_make_rtw_hook, during the after_make hook generated the following error:
The build failed with the following message: "C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014a/arduino/include" -I"C:/MATLAB/SupportPackages/R2014a/arduino/blocks/sfcn/include" -I"C:/Users/biorobotics/Documents/MATLAB/arduinodue_gettingstarted_rtt" -I"C:/Users/biorobotics/Documents/MATLAB" -I"C:/MATLAB/SupportPackages/R2014a/arduinodue/arduinoduedemos" -I"C:/Program Files/MATLAB/R2014a/extern/include" -I"C:/Program Files/MATLAB/R2014a/simulink/include" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014a/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/arch/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=arduinodue_gettingstarted" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=154" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./arduinodue_gettingstarted.c ./arduinodue_gettingstarted_data.c ./ert_main.c

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
cs-make: *** [IPAddress.o] Error 255

The build process will terminate as a result.

The build failed with the following message: "C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014a/arduino/include" -I"C:/MATLAB/SupportPackages/R2014a/arduino/blocks/sfcn/include" -I"C:/Users/biorobotics/Documents/MATLAB/arduinodue_gettingstarted_rtt" -I"C:/Users/biorobotics/Documents/MATLAB" -I"C:/MATLAB/SupportPackages/R2014a/arduinodue/arduinoduedemos" -I"C:/Program Files/MATLAB/R2014a/extern/include" -I"C:/Program Files/MATLAB/R2014a/simulink/include" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014a/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/arch/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=arduinodue_gettingstarted" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=154" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./arduinodue_gettingstarted.c ./arduinodue_gettingstarted_data.c ./ert_main.c

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
cs-make: *** [IPAddress.o] Error 255

21 May 2014 Simulink Support Package for Arduino Due Hardware Student-priced microcontroller board Author: MathWorks Simulink Team

Diagnostic viewer of Matlab shows this:

<Code Generation>

The call to realtime_make_rtw_hook, during the after_make hook generated the following error:
The build failed with the following message: "C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014a/arduino/include" -I"C:/MATLAB/SupportPackages/R2014a/arduino/blocks/sfcn/include" -I"C:/Users/biorobotics/Documents/MATLAB/arduinodue_gettingstarted_rtt" -I"C:/Users/biorobotics/Documents/MATLAB" -I"C:/MATLAB/SupportPackages/R2014a/arduinodue/arduinoduedemos" -I"C:/Program Files/MATLAB/R2014a/extern/include" -I"C:/Program Files/MATLAB/R2014a/simulink/include" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014a/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/arch/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=arduinodue_gettingstarted" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=154" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./arduinodue_gettingstarted.c ./arduinodue_gettingstarted_data.c ./ert_main.c

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
cs-make: *** [IPAddress.o] Error 255

The build process will terminate as a result.

The build failed with the following message: "C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/tools/g++_arm_none_eabi/bin/arm-none-eabi-gcc" -I"C:/MATLAB/SupportPackages/R2014a/arduino/include" -I"C:/MATLAB/SupportPackages/R2014a/arduino/blocks/sfcn/include" -I"C:/Users/biorobotics/Documents/MATLAB/arduinodue_gettingstarted_rtt" -I"C:/Users/biorobotics/Documents/MATLAB" -I"C:/MATLAB/SupportPackages/R2014a/arduinodue/arduinoduedemos" -I"C:/Program Files/MATLAB/R2014a/extern/include" -I"C:/Program Files/MATLAB/R2014a/simulink/include" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src" -I"C:/Program Files/MATLAB/R2014a/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014a/rtw/c/ert" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/libsam" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/CMSIS/Include" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/system/CMSIS/Device/ATMEL" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/cores/arduino/USB" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/hardware/arduino/sam/variants/arduino_due_x" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/src" -I"C:/MATLAB/SupportPackages/R2014a/arduino-1.5.4/libraries/Servo/arch/sam" -c -g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -mcpu=cortex-m3 -mthumb -I. -D"MODEL=arduinodue_gettingstarted" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=0" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -D"printf=iprintf" -D"F_CPU=84000000" -D"_RUNONTARGETHARDWARE_BUILD_=" -D"_ROTH_DUE_=" -D"ARDUINO=154" -D"ARDUINO_SAM_DUE=" -D"ARDUINO_ARCH_SAM=" -D"__SAM3X8E__=" -D"USB_PID=0x003e" -D"USB_VID=0x2341" -D"USBCON=" -D"_RTT_NUMSERVOS_=0" ./IPAddress.cpp ./Print.cpp ./Reset.cpp ./RingBuffer.cpp ./Stream.cpp ./UARTClass.cpp ./USARTClass.cpp ./CDC.cpp ./HID.cpp ./USBCore.cpp ./WInterrupts.c ./WMath.cpp ./WString.cpp ./cortex_handlers.c ./cxxabi-compat.cpp ./hooks.c ./iar_calls_sam3.c ./itoa.c ./syscalls_sam3.c ./wiring.c ./wiring_analog.c ./wiring_digital.c ./wiring_pulse.cpp ./wiring_shift.c ./variant.cpp ./io_wrappers.cpp ./arduinodue_gettingstarted.c ./arduinodue_gettingstarted_data.c ./ert_main.c

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
cs-make: *** [IPAddress.o] Error 255

Contact us