When I try to find the arduino on the serial port with:
a = arduino('COM 5', 'uno')
I get the following message.
Unable to load a message catalog 'MATLAB:arduinoio:general'. Please check the file location and format.
I already reinstalled matlab and all the packages, but still the same issue occurs.
Anyone with a solution?
Thanks in advance!
Hi, I was wondering if the Arduino IO package also allows me to use a Arduino library such as AccelStepper? If so do I have to take care of anyting special while installing Arduino IO, for example a special pde file? Thanks in advancefor your help!
Error evaluating registered method 'Start' of MATLAB S-Function 'msfun_arduino_io_setup' in 'library_test/Arduino IO Setup'. The following is the MATLAB call stack (file names and line numbers) that produced this error:
Connection unsuccessful, please make sure that the board is powered on, running a sketch provided with the package, and connected to the indicated serial port. You might also try to unplug and re-plug the USB cable before attempting a reconnection.
I can't get any of these blocks to work for me. I'm running Matlab 2013b and using an Arduino Mega 2560. Any help? every time I try running one of the Simulink Blocks I get the following:
" The corresponding 'msfun_arduino_io_setup.tlc' file for the MATLAB S-function 'msfun_arduino_io_setup' in block 'encoder_sim/Arduino IO Setup' must be located in the current working directory,...
Trying to incorporate the support package with Max32 ChipKit, carried out simple initial set-up. In MATLAB returns;
Attempting connection .............
Warning: Unsuccessful read: A timeout occurred before the Terminator was reached.
Error using arduino (line 104)
Connection unsuccessful, please make sure that the board is powered on, running a
sketch provided with the package, and connected to the indicated serial port. You
might also try to unplug and re-plug the USB cable before attempting a