Refine by Product

Refine by Time Frame

image thumbnail

updated 1 month ago

PicoScope® 3000 Series - MATLAB® Generic Instrument Driver by Pico Technology

MATLAB Instrument Driver for use with PicoScope 3000A/B oscilloscopes (matlab, picoscope, instrument driver)

[methodinfo,structs,enuminfo,ThunkLibName]=PS3000aMFile

[methodinfo,structs,enuminfo,ThunkLibName]=PS3000aMFile

[methodinfo,structs,enuminfo,ThunkLibName]=ps3000aWrapMFile

image thumbnail

updated 1 month ago

PicoScope® 5000 Series - MATLAB® Generic Instrument Driver by Pico Technology

MATLAB Instrument Driver for use with PicoScope 5000 Series oscilloscopes (instrument driver, matlab, measurement)

[methodinfo,structs,enuminfo,ThunkLibName]=ps5000aMFile

[methodinfo,structs,enuminfo,ThunkLibName]=ps5000aMFile

[methodinfo,structs,enuminfo,ThunkLibName]=ps5000aWrapMFile

image thumbnail

updated 1 month ago

Darwinop robot simulink block by Florent

supervision blocks to read/write data on the darwinop robot. (darwinop, robot, simulink)

image thumbnail

updated 3 months ago

TCPIP/Serial Data Live Plot Utility by Peng Xu

Live plot utility plots ASCII coded streaming data over tcpip or serial connection. (plot, realtime, gui)

live_plot(varargin)

live_plot_demo(varargin)

image thumbnail

updated 5 months ago

Instrument Control Toolbox Support Package for National Instruments NI-DMM Digital Multimeters by MathWorks Instrument Control Team

Control and acquire data from NI-DMM digital multimeters (multimeter)

image thumbnail

updated 5 months ago

Instrument Control Toolbox Support Package for National Instruments NI-DCPower Power Supplies by MathWorks Instrument Control Team

Control and configure NI-DCPwr power supplies and SMUs (power meter)

image thumbnail

updated 5 months ago

Instrument Control Toolbox Support Package for National Instruments NI-845x I2C Interface by MathWorks Instrument Control Team

Send and receive I2C messages from MATLAB using NI-845x (i2c)

image thumbnail

updated 6 months ago

rtl-sdr: multi-dongles based flexible spectrum scanner by Xianjun Jiao

Multi-dongles scanner with configurable parameters: start-end frequency, RBW, num of dongles, etc. (rtlsdr, software defined radi..., spectrum scanner)

raw2iq(a)

set_freq_tcp(tcp_obj, freq)

set_gain_tcp(tcp_obj, gain)

image thumbnail

updated 6 months ago

rtl-sdr: multi-dongles based GSM FCCH scanner by Xianjun Jiao

Multi-dongles parallel GSM FCCH scanner to help you find GSM broadcasting carrier quickly! (rtlsdr, rtl_tcp, gsm)

FCCH_coarse_position(s, decimation_ratio)

move_fft_snr_runtime_avg(s, mv_len, fft_len, th)

raw2iq(a)

image thumbnail

updated 6 months ago

Instrument Control Toolbox Support Package for National Instruments NI-FGEN function generators by MathWorks Instrument Control Team

Support Package Installer File that works with Support Package Installer. (national instruments, nifgen, function generator)

image thumbnail

updated 6 months ago

Instrument Control Toolbox Support Package for National Instruments NI-SCOPE Oscilloscopes by MathWorks Instrument Control Team

Control and acquire data from National Instruments NI-SCOPE devices (national instruments, digitizer, oscilloscope)

image thumbnail

updated 6 months ago

Instrument Control Toolbox Support Package for Ocean Optics spectrometers by MathWorks Instrument Control Team

Acquire data and control Ocean Optics spectrometers with MATLAB (ocean optics, spectrometer)

image thumbnail

updated 7 months ago

Measure and transfer IQ data from an Agilent v2820a RF Vector Signal Analyzer to MATLAB(R) by Adarsh Narasimhamurthy

MATLAB(R) example to make an IQ measurement on an Agilent v2820a and transfer the data to MATLAB(R) (agilent, measurement, instrument control to...)

IQDataTransfer_Agv2820a.m

image thumbnail

updated 7 months ago

Capture a Screenshot of an Agilent X-Series Signal Analyzer and Transfer it to MATLAB(R) by Adarsh Narasimhamurthy

MATLAB(R) example to save a screenshot of an Agilent X-Series Signal Analyzer using VISA interface. (measurement, data import, agilent signal analyz...)

TransferScreenShot.m

image thumbnail

updated 8 months ago

TCP ModBus Communication With Yaskawa Controller by Kees

Communicate with Yaskawa controller via ModBus protocol in MATLAB script (modbus, tcp, control)

ModBusYaskawa.m

image thumbnail

updated 8 months ago

PicoScope® 2000 Series - MATLAB® Generic Instrument Driver by Pico Technology

MATLAB Instrument Driver for use with PicoScope 2000 Series oscilloscopes (Beta Release) (instrument driver, matlab, measurement)

[methodinfo,structs,enuminfo,ThunkLibName]=PS2000MFile

[methodinfo,structs,enuminfo,ThunkLibName]=PS2000MFile

[methodinfo,structs,enuminfo,ThunkLibName]=ps2000WrapMFile

image thumbnail

updated 11 months ago

Simulation and Control of NAO ankle kit with SimMechanics and Serial IO blocks by MathWorks Robotics Team

Model and simulate a complicated ankle joint using Simulink and SimMechanics. (nao, nao ankle, cad import)

Tibia_gauche_leger

serial_nao_final_12b

image thumbnail

updated 12 months ago

NFA Data Read by O.J. Danzy

This script shows how to read data back from the N897xA (NFA) Noise Figure Analyzer. (measurement, instrument control to..., nfa)

nfa_data_read.m

image thumbnail

updated 1 year ago

saveOSAtrace by Micke

Svaes traces ['A', 'BC' etc] from OSA at specified GPIB address (data import, ploting)

saveOSAtrace.m

image thumbnail

updated almost 2 years ago

IQ Baseband Builder by Neil Forcier

This application allows you to generate IQ baseband signals for the Agilent 33522A, 33522B, 33512B (iq, qam, wireless communicatio...)

IQ_Baseband_Builder.m

addWGNoise(yData, EbNo, nsamp,M)

ampImbalance(Ia, x)

image thumbnail

updated almost 2 years ago

SCOPE: interactively tabulate SEER excel variables by Rex Cheung

This takes SEER excel column data interactively, tabulate them, write back in table format. (data import, data export, optimization)

output=xls2tabulate2xls(xlsfilename)

image thumbnail

updated 2 years ago

Agilent N6700B Power Supply - MATLAB Example by Adarsh Narasimhamurthy

Allows MATLAB to connect to an Agilent N6700B Power supply using SCPI, and set the output voltage. (agilent, instrument control to..., n6700b)

N6700_Demo(voltage, chanIndex, overVoltage, currentProtSt...

image thumbnail

updated 2 years ago

RS485/MODBUS Communication with JLD416PVA Power Meter by W.

Reads power, voltage and current data via RS485/MODBUS from a JLD416PVA meter. (modbus, rs485, jld416pva)

append_crc(message)

checkCRC(response)

parseHB416PVA(instrResponse)

image thumbnail

updated 4 years ago

Test and Measurement Seminar Demos by Michelle Hirsch

Source code for Test and Measurement Seminar Demos, including electronic throttle body case study. (example, application, data acquisition)

ConfigureTrigger(ai,TriggerDelay,TriggerRange,TriggerCond...

CreateAI(filename,vendor,boardid,channels);

CreateDIO(vendor,boardid,channels);

image thumbnail

updated 5 years ago

Chinese Matlab Digest: Matlab Technical Bulletin by Hong Zhang

Chinese Matlab Digest is the first matlab digest published in Chinese by www.iLoveMatlab.cn (digest, matlab digest, chinese digest)

image thumbnail

updated 6 years ago

Agilent MXA/EXA and PSA MDD Driver by Richard Overdorf

PSA and MXA, EXA driver. It contains trace acquisition and IQ (w/ deep capture - PSA) functionality. (instrument drivers, mxa, psa)

example9

AcquireIQdata.m

deepcaptureIQ_v15.m

image thumbnail

updated almost 8 years ago

Simulink Simulator for a Brushless DC Motor by Devendra Rai

Complete simulator for brushless dc motor based on MATLAB R13. (simulation, bldc simulator, simulator)

control1(t,x,u,flag,J,DF,N,BM,Rr,Rl,delta,KP,KI,KD,basecu...

delay(t,x,u,flag)

CONTROLLER_MOD

Contact us