Refine by Content Type

Refine by Product

Refine by Time Frame

image thumbnail

updated 13 days ago

Flexible Beam in SimMechanics by Pravesh Sanghvi

Flexible beam using lumped parameter and state-space methods for static, modal, and dynamic analysis (physical modeling, flexible bodies, cantilever beam)

Compute_GFE_Prop(rho, youngsM, shearM, numelem, beam_leng...

Extr_Data_Box(box_ox, box_ix, varargin)

Cantilever_Beam_MS2G_Parameters.m

image thumbnail

updated 14 days ago

CAD to MATLAB to SimMechanics by Steve Miller

Export a CAD assembly to a MATLAB data structure and import into a SimMechanics model. (physical modeling, cad, solidworks)

data2smixml(smiModel,xmlFile)

robot_fromCAD2MATLAB_SolidWorks.m

robot_fromCAD2MATLAB_SolidWorks_with_comments.m

image thumbnail

updated 1 month ago

Emergency power system for a more electrical aircraft by Pierre Mercier

Simulation of a power system in an aircraft using three products in the Physical Modelling (aerospace, electrical generator, more electrical aircr...)

Aileron_PARAM.m

aircraftRamAirTurbineAssembly_MultiDomain

image thumbnail

updated 1 month ago

Physical Modeling Tutorial Exercises by Steve Miller

Physical Modeling tutorial exercises from hands-on workshop events. (simulation, simscape simmechanics..., simscape)

image thumbnail

updated 3 months ago

Modélisaton et Simulation des systèmes multi-physiques avec MATLAB - Simulink (Ivan LIEBGOTT) by Ivan Liebgott

Présentation du potentiel de MATLAB dans le cadre de la modélisation multi-physique (multi, physique, tutorial)

image thumbnail

updated 3 months ago

Scissor Lift Model in SimMechanics by Steve Miller

Scissor lift built from a library of parameterized, reusable components, with a hydraulic actuator. (simmechanics, simhydraulics, simscape)

Extr_Data_Link2Hole(L, W, r)

Extr_Data_Ring(ring_or, ring_ir, deg1, deg2, varargin)

Scissor_Jack_Param_GUI(varargin)

image thumbnail

updated 3 months ago

Aileron Model in SimMechanics by Steve Miller

Aileron model with hydraulic and electrical actuation, including system-level and detailed variants (aerospace, hydraulic, electrical)

image thumbnail

updated 3 months ago

Lift Table Model in Simscape by Steve Miller

Lift table with hydraulic actuation, controlled by an analog circuit, with a 3-D scissor mechanism. (hydraulic, electrical, physical modeling)

image thumbnail

updated 3 months ago

Backhoe Model in Simscape by Steve Miller

Backhoe model, including hydraulic actuators for arm and bucket tilt, and multibody dynamics. (backhoe, excavator, digger)

image thumbnail

updated 3 months ago

SimMechanics-Simscape Interface Examples by Steve Miller

Models showing connection between Simscape and SimMechanics Second Generation Technology (simmechanics, second generation, 2g)

image thumbnail

updated 3 months ago

SimMechanics Parameterized Part Examples by Steve Miller

Parameterized parts for SimMechanics, including MATLAB functions for defining extrusions. (simmechanics, second generation, 2g)

Extr_Data_Ellipse(a, b, deg1, deg2, ctr, varargin)

Extr_Data_Gear(type, Dp, N, varargin)

Extr_Data_Link1Hole(L, W, r)

image thumbnail

updated 3 months ago

Contact Force Examples in SimMechanics (Mini Golf) by Steve Miller

Examples of 2D contact forces (planar) in SimMechanics, including a mini golf game with 9 holes. (simmechanics, second generation, 2g)

image thumbnail

updated 3 months ago

Simple Suspension test by Arts Hirata

Simple one suspension test by SimMechanics & SimDriveline (mechanical modeling, physical modeling)

axle_add(blk,blk2,sgn,pos)

axle_add_c(blk,blk2,sgn,pos)

axle_add_el(blk,blk2,sgn,pos)

image thumbnail

updated 3 months ago

Simple Electric Power Steering Model by Arts Hirata

Simple EPS plant model and motor control model (mechanical modeling, physical modeling)

axle_add(blk,blk2,sgn,pos)

axle_add_c(blk,blk2,sgn,pos)

axle_add_el(blk,blk2,sgn,pos)

image thumbnail

updated 4 months ago

Quad Copter model by Arts Hirata

Quad copter simple plant model and PID controller (mechanical modeling, physical modeling)

axle_add(blk,blk2,sgn,pos)

axle_add_c(blk,blk2,sgn,pos)

axle_add_el(blk,blk2,sgn,pos)

image thumbnail

updated 5 months ago

Designing a controller for an Inverted Pendulum - hebrew by Roni Peer

Designing a controller for an Inverted Pendulum - hebrew (inverted pendulum, control, design)

image thumbnail

updated 5 months ago

Using SimMechanics for designing and testing Mechanical Systems by Roni Peer

A Presentation and demos for using Simulink, SolidWorks and SimMechanics. (simmechanics, simulink, control)

image thumbnail

updated 5 months ago

SimMechanics Model from MATLAB Code by Pravesh Sanghvi

MATLAB code to build a SimMechanics model of a single link and a multi-link pendulum (programmatically, matlab code, pendulum)

ML_Build_SM_Pendulum.m

ML_Build_SM_Pendulum_Multilink.m

image thumbnail

updated 5 months ago

Vehicle Model with Delft-Tyre in SimMechanics by Steve Miller

Vehicle model in SimMechanics using 3-D tire model (vehicle, automotivesuspensionp..., physical modeling)

Configure_TNO_Tire_Test(tire_test)

PlotTireOutputs_UI(varargin)

Plot_Tire_Outputs(index)

image thumbnail

updated 6 months ago

Quadrotor modelling and Control with SimMechanics by Leonardo Araujo

This model is part of my Quadrotor project (simmechanics, control design, quadrotor)

QuadRotor_PID_Simulink3d

image thumbnail

updated 11 months ago

Simulation and Control of NAO ankle kit with SimMechanics and Serial IO blocks by MathWorks Robotics Team

Model and simulate a complicated ankle joint using Simulink and SimMechanics. (nao, nao ankle, cad import)

Tibia_gauche_leger

serial_nao_final_12b

image thumbnail

updated 12 months ago

Buck converter by Karthi S

Step-down converter (simulatiom)

buck

image thumbnail

updated 1 year ago

HIL of Position Control System by Sam Mirsky

Files for Webinar on Aug 28, 2008: HIL of Position Control System

image thumbnail

updated 1 year ago

Wind Turbine Model by Steve Miller

Wind turbine model including blades, nacelle, pitch and yaw actuation, generator and control system. (wind, wind turbine, wind turbine model)

image thumbnail

updated 1 year ago

Comparing different methods to solve an Inverted Pendulum problem by Roni Peer

A simple reporting tool that shows how you can model an inverted pendulum in a few methods. (report, comparison, mupad)

Dynamics of a Single Link

example_syms.m

SLSingleLink

image thumbnail

updated almost 2 years ago

SCOPE: interactively tabulate SEER excel variables by Rex Cheung

This takes SEER excel column data interactively, tabulate them, write back in table format. (data import, data export, optimization)

output=xls2tabulate2xls(xlsfilename)

image thumbnail

updated 2 years ago

Hair, vibrissae, whisker mechanical model by Alexander Brodsky

Simulation of vibrissae mechanical model. (hair, vibrissae, whisker)

hair_model_data.m

hair_model

image thumbnail

updated 2 years ago

Furuta (rotary) Pendulum by Alan Jennings

Equations of motion for a pendulum mounted on rotating base are compared to SimMechanics. (pendulum, simulation, modeling)

The equations of motion for a rotary pendulum (furuta pen...

RotPen_Test_Submitt

image thumbnail

updated 3 years ago

SimMechanics: Import de fichiers SolidWorks by Laurent

Tutoriel vidéo (d'environ 15 mn), qui comprend des démonstrations et exercices (simmechanics sti2d, sti2d)

robot

image thumbnail

updated 3 years ago

Quarter of Vehicle Simulation with Simscape by Javier Ruiz

The model simulates a quarter of vehicle employing Simulink and Simscape. (quarter of vehicle, simscape, car)

QofV_SIMULATION_SimscapeMATHWORKSuploaded

image thumbnail

updated 3 years ago

PID Controller Design and Tuning with MATLAB and Simulink - Fourbar Linkage by Arkadiy Turevskiy

This demo file shows new capabilities for PID Controller design and tuning in MATLAB and Simullink. (pid control, pid controller, control design)

Fourbar

image thumbnail

updated 3 years ago

SimMechanics STL file importer by Jean-Baptiste Lanfrey

MATLAB code that automatically creates SimMechanics blocks from text-based STL files. (simmechanics, stl, stereolithographic)

density()

mech_import_stl(varargin)

stl2m

image thumbnail

updated 3 years ago

Space vector PWM for 3 leg inverters by SUDHAKAR AKKI

in a svm we have to use 6switches in 3 legs. overall outage increased by svm method.THD also reduced (svm for 3 leg inverte..., space vector pwm, simulation)

svm3legprint

image thumbnail

updated 3 years ago

space vector PWM for 2 leg inverter by SUDHAKAR AKKI

Semiconductor switches mainly determine the overall price of power converters.so 2leg inverters best (2 leg inverter, space vector pwm, simulink)

svm2leg

image thumbnail

updated 3 years ago

Flutter Analysis Model by Cole Stephens

Models a 2 DOF wing using SimMechanics™. (aerospace, aeronautics, aerodef)

make2plots(X1, Y1, Y2)

make3plots(X1, Y1, Y2, Y3)

FindFlutBnd.m

image thumbnail

updated almost 4 years ago

SimMechanics pendulum used for control optimization by Alan Jennings

Pendulum imported via SimMechanics generates dynamics for optimal dampening solved by DIDO. (control design, optimal control, pendulum)

Arm_1DOF_ResultsCheck_a

[Results,u_star2,t,Q,K,tset]=...

[Results,u_star2,t]=Arm_1DOF_LinearStateTransition_Fun(St...

image thumbnail

updated almost 4 years ago

Control optimization of a 4DOF arm using DIDO by Alan Jennings

4 DOF arm imported via SimMechanics generates dynamics for optimal pick-place control solved by DIDO (control design, optimal control, robot)

Arm_4DOF_ResultsCheck

[a,b]=Arm_4DOF_MinEnergy_Cost(x)

[t3,State3,Control_Out]=Arm_4DOF_PathCompose(Pose1,Pose2,...

image thumbnail

updated almost 4 years ago

Simulink® for Industrial Control of a Sheet-Metal-Rolling Application by Alec Stothert

Files from webinar on Industrial control of a steel rolling mill (industrial control, steel mill, optimization)

RollingMill_init.m

RollingMill

image thumbnail

updated almost 4 years ago

Motion Driver for SimMechanics by Daniel

A block to generate velocity and acceleration from a position signal. (modeling, simulation)

motdrv_lib_callbacks(block, callback)

slblocks

mech_motdrv

image thumbnail

updated almost 4 years ago

Modeling and Control of Multi Stage Rolling Mill Process by Parasar Kodati

This demo shows plant modeling and controller design for a multi stage rolling mill process. (control design, simulation, simulink)

multi_stand_init.m

mill_looper_lib

rolling_mill_three_stands_PID

image thumbnail

updated 4 years ago

Five Link Suspension by Paul Barnard

Automotive Five Link Suspension example in SimMechanics. (automotive, automotive suspension, simmechanics)

five_link_VRML

five_link_VRML

five_link_VRML

image thumbnail

updated 4 years ago

Servomotor modeling with SimMechanics and SimElectronics by Leonardo Araujo

Servomotor modeling with SimMechanics and SimElectronics (servomotor, servo motor, simulink)

Montagem_ServoSimples

Servomotor_Complete

image thumbnail

updated 4 years ago

Rotatory Gantry Simulation by mohammad

the Rotatory Gantry of Quanser is Simulated with the controller in SimMechanics (control design, simulink, simmechanics)

Rotary_2D_Gantry

image thumbnail

updated almost 5 years ago

Modeling Flexible Bodies in SimMechanics by Dallas Kennedy

Technical paper and examples on modeling flexibility in SimMechanics. (mechanical modeling, flexible vibration fe..., flexible vibration fe...)

cantilever_aluminum

cantilever_init( cantileverData )

cosmos2m( fNameDir, fNameRoot , meshonly , meshindeces , ...

image thumbnail

updated almost 5 years ago

Automated Failure Boundary Mapping by Stuart Kozola

Demo files from July 21, 2009 webinar (statistics, optimization, clustering)

Failure Boundary Identification

Flutter Model Demo

boundaryArea(Y,X,lb,ub,limitFunction)

image thumbnail

updated almost 5 years ago

Simple Inverted Pendulum with LQR,PID SimMechanics by Leonardo Araujo

This sample this sample show the simple Inverted Pendulum control with lqr (simmechanics, simulink, mimo)

InvertedPendulumControled_PID

InvertedPendulumControled_State_Space

InvertedPendulumControled_State_Space_SolidWorks.mdl

image thumbnail

updated almost 5 years ago

Mechanical Friction with Simulink and Physical Modeling by Dallas Kennedy

Modeling and simulating mechanical friction in the Simulink® and Physical Modeling environment (mechanical modeling, friction, mechanics)

plotFrictionCurve.m

continuousClutch1

continuousClutch2

image thumbnail

updated almost 5 years ago

Double suspended mass-spring-damper system by Guy Rouleau

2 suspended masses linked by springs and dampers demonstrating basic SimMechanics features. (simulink, simmechanics, dynamics)

SuspendedMassSpring

image thumbnail

updated almost 5 years ago

Using Model-Based Design for Vehicle Electronics Applications by Michael Carone

This ZIP-file contains the presentation and power window model that was used in the MathWorks webina (automotive, vehicle, body)

mech_interface_blocks_update(blockH)

mech_interface_portSup(hPort)

pmJointInfo (hBlk,watchPort)

image thumbnail

updated almost 5 years ago

Simulation of a one-legged hopping robot by Guy Rouleau

Simulation of a one-legged hopping robot (mechanical modeling, robotics, simmechanics)

sfuntraj(t,x,u,flag,axes,Ts,mode)

init_hopper.m

OneLeg_VR_TouchInput

Contact us