getOSATrace by Micke

Retrives trace from Ando AQ6317B or Anritsu MS9030B Optical Spectrum Analyzer (data import, gpib, instrument driver)

getOSAtrace.m

getTEKtrace by Micke

Retrives single trace from most Tektronix scopes over GPIB tested with TDS 3k and 784A and HP-54120B (gpib, instrument driver, data import)

Data=getTEKtrace(GPIB,CHstring)

AQ6317B OSA Capture with Prologix GPIB-USB by Priyanth Mehta

Runs a single trace on an ANDO OSA connected via Prologix GPIB-USB controller. (data import, measurement, gpib)

OSA_Prologix.m

getESATrace by Micke

Retrive trace from Anritsu MS710 via GPIB (data import, gpib, instrument driver)

Data=getESATrace(varargin)

GPIB example for MATLAB by Steven Kolak

MATLAB GPIB - Example showing you how to use MATLAB with GPIB to configure and control instruments. (application, gpib, example)

MATLAB_GPIB.m

res_meas by M. A. Hopcroft

GUI for resonator measurement and data download from Signal Analyzers and Oscilloscopes (example, application, resonator analyzer os...)

[bandwidth, Q, EE, varargout]=bandqr(res)

kpib(instrument, GPIB, command, value, channel, aux, verbos...

measure_res(tools,center,spans,average,avenum,verbose)

Generate Instruments Address List by T. R.

Search for connected boards/instruments and generate a list with found items into a cell. (instruments, board, gpib)

genintraddrlst( strFilter )

Simple GUI for GPIB communication by Roger Yeh

Set up a GPIB connection to send and receive messages. (gpib, hpib, ieee488)

GPIB_GUI(varargin)

Test and Measurement Seminar Demos by Scott Hirsch

Source code for Test and Measurement Seminar Demos, including electronic throttle body case study. (electronic, gpib, data acquisition)

ConfigureTrigger(ai,TriggerDelay,TriggerRange,TriggerCondit...

CreateAI(filename,vendor,boardid,channels);

CreateDIO(vendor,boardid,channels);

HP 8510C Demo by Scott Hirsch

Demonstration code for communication with an HP 8510C network analyzer (example, application, serial)

hp8510C_demo.m

findInstrument - Find and connect to instruments using the model or manufacturer name by Gautam Vallabha

Simplifies connecting to a USB or GPIB instrument using the model name, vendor name or VISA resource (instrument control, ict, instrument)

findInstrument(searchstr, adaptor)

findInstrument_demo.m

Lambda-Physik FL3002 GPIB Instrument Drivers by Thomas Spinka

Provides a basic command set to control the FL3001/2 dye laser over GPIB. (instrument drivers, dye, laser)

AllSpoll(boardID, addrlist)

DevClear(boardID, addr)

DevClearList(boardID, addrlist)

gpib by Tom Davis

Communicate with lab equipment from MATLAB using GPIB commands. (national instruments, gpib, equipment)

hp8562( op, data )

hp8642( op, data )

hp8662( op, data )

using GPIB & DAC board by Young-Sang Kim

using GPIB & DAC board (gpib, dac, mosfet)

charcurve.m

gettemp by Yuval Ben-Dov

Read predefined channels form an Agilent 34970A data logger through NI GPIB interface. (34970a, agilent, hp)

gettemp(varargin);

get_trace by Yuval Ben-Dov

Reads data from Tektronics 370 Curve Tracer. (hardware driver, gpib, tektronix 370 curve t...)

get_trace(varargin)

NI GPIB toolbox by Alaa Makdissi

GPIB Toolbox for MATLAB (drivers, national instrument, hardware driver)

instreset by Richard Medlock

A simple function to clear and delete all instruments. (example, application, instrument control to...)

instreset