- Online Traffic School
pop
Online Traffic School, Driver Improvement Online and Point Reduction courses offered by NDSS traffic school are State and DMV Certified in California, Florida, Texas, Arizona, Colorado, Idaho, Missouri, Nevada, New Mexico, Virginia, Washington and other states.
http://www.ndsstrafficschool.com
Read 10 Reviews
(Added: Mar 18, 2004 Hits: 1755 Rating: 0.00 Votes: 0)
Rate It
Review It
- DRIVE - Dynamic simulation of car engines, gearboxes, and transmissions
pop
DRIVE simulates the behavior of cars during acceleration along their longitudinal axis of symmetry. The coupled dynamics of sprung and unsprung masses are obtained by calculating vehicle vertical motion and pitch. The driveline is carefully modeled from the clutch to the tires, including the spring drive and gearbox. Tire performances are expressed by a nonlinear slip-force diagram, allowing for the correct calculation of traction forces, including those with high slip ratios.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=262
Read 9 Reviews
(Added: Apr 07, 2000 Hits: 1729 Rating: 0.00 Votes: 0)
Rate It
Review It
- TruckSim and CarSim - Simulation of the vehicle dynamics of cars and trucks
pop
TruckSim is a software package for predicting the braking, steering, and roll behavior of heavy trucks and combination vehicles. CarSim performs similar simulations for passenger cars (four-wheel independent suspension) and sport utility vehicles (front independent and rear axle >suspensions) with or without trailers.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=114
Read 8 Reviews
(Added: Apr 07, 2000 Hits: 1215 Rating: 0.00 Votes: 0)
Rate It
Review It
- Engine++
pop
Engine++ is a Simulink application that consists of an engine component model library and a GUI-based model calibration toolset. It is an accurate engine model that facilitates rapid, inexpensive engine control and diagnostics systems development and validation within the MathWorks simulation environment.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=596
Read 1 Reviews
(Added: Oct 07, 2004 Hits: 1161 Rating: 0.00 Votes: 0)
Rate It
Review It
- MathWorks - Model Based Calibration Toolbox
pop
The Model-Based Calibration Toolbox provides design tools for the calibration of powertrain systems. The toolbox is built on the high-performance technical computing environment of MATLAB as well as the simulation capabilities of Simulink. The Model-Based Calibration Toolbox reduces dynamometer testing time, increases engineering productivity, saves calibration time, and has the potential to improve powertrain performance and reliability.
http://www.mathworks.com/products/mbc/
Read 6 Reviews
(Added: Jul 02, 1999 Hits: 921 Rating: 0.00 Votes: 0)
Rate It
Review It
- MADYMO - Mathematical dynamic models
pop
MADYMO (Mathematical Dynamic Models) is a software package that allows users to design and optimize the crash safety performance of vehicles efficiently, quickly, and cost-effectively. It is generic multibody and finite element software with a range of specific features for impact simulation.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=554
Read 4 Reviews
(Added: Jul 01, 2004 Hits: 803 Rating: 0.00 Votes: 0)
Rate It
Review It
- ve-DYNA� - Vehicle dynamics DYNA�ware
pop
ve-DYNA allows real-time capable model simulation to test controls and components in a virtual vehicle under realistic conditions. Whether conducted in the onboard mode with hardware-in-the-loop test beds or in the offboard mode, ve-DYNA runs in real time with a time increment of less than 1 ms. The parameters of the ve-DYNA model can be entered using the ve-DYNA GUIs to allow rapid prototyping of an infinite number of vehicle configurations using a single Simulink model. The user has access to the calling interfaces as well as to the data workspace of ve-DYNA, such that inputs and outputs can be defined by the user and even sections of the ve-DYNA model can be replaced with the help of Simulink models. The software is completely modular and can be adapted and customized to your specific needs.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=295
Read 5 Reviews
(Added: Jan 02, 2001 Hits: 755 Rating: 0.00 Votes: 0)
Rate It
Review It
- CarMaker - Virtual Test Driving and Hardware-in-the-Loop
CarMaker is a simulation package for virtual test driving of engine driven road vehicles. It is available for offline, real-time, and hardware-in-the-loop applications. The software includes a powerful driver model, a road model that processes real road data, an animation tool, and many other features.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=371
Read 5 Reviews
(Added: Apr 05, 2000 Hits: 655 Rating: 0.00 Votes: 0)
Rate It
Review It
- WAVE - Performance simulation and gas dynamics
WAVE provides engine performance and gas dynamics simulation software for motor sport, volume automotive, truck, agricultural, locomotive, marine, power generation, and other industries. WAVE enables performance simulations to be carried out based on virtually any intake, combustion, and exhaust system design. The program is based on one-dimensional flow in ducts and quasi-three-dimensional representation of volumes.
http://www.mathworks.com/products/connections/product_main.html?prod_id=148
(Added: Apr 07, 2000 Hits: 540 Rating: 0.00 Votes: 0)
Rate It
Review It
- Virtual Engines, Virtual 4-Stroke, Virtual 2-Stroke
Virtual Engines can co-simulate with MATLAB and Simulink and can communicate directly on a time-step basis. Virtual Engines provides a wide variety of simulated inputs to the MATLAB workspace, and MATLAB can update a wide range of simulated outputs that can be returned to the Virtual Engines model.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=670
(Added: Sep 23, 2005 Hits: 513 Rating: 0.00 Votes: 0)
Rate It
Review It
- OpenECU Rapid Prototyping Environment
Pi Technology's OpenECU platform offers a solution to engine and vehicle development that helps you get quickly to what you need: working, robust control systems. A production ECU, with an MPC555 processor core, is the basis for the system.
http://www.pitechnology.com/
Read 4 Reviews
(Added: Hits: 488 Rating: 0.00 Votes: 0)
Rate It
Review It
- Free Online MathWorks Seminar: Model Based Calibration Toolbox
The Model-Based Calibration Toolbox provides design tools for the calibration of automotive powertrain systems. The toolbox is built on the high-performance technical computing environment of MATLAB and the simulation capabilities of Simulink. The Model-Based Calibration Toolbox can be used to reduce engine dynamometer testing time, produce sharable models of powertrain systems, and reduce calibration development time.
http://www.mathworks.com/hmtd_mbc
Read 2 Reviews
(Added: Jun 12, 2003 Hits: 456 Rating: 0.00 Votes: 0)
Rate It
Review It
- RAPTOR�
The Rapid Automotive Performance Simulator (RAPTOR�) is commercial off-the-shelf (COTS) modular simulation software co-developed by Southwest Research Institute (SwRI) and DaimlerChrysler for use by automotive, truck, and bus developers and suppliers.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=620
Read 5 Reviews
(Added: Oct 07, 2004 Hits: 455 Rating: 0.00 Votes: 0)
Rate It
Review It
- DynaMod - Multiple input, multiple output system identification
DynaMod is comprised of a suite of code engines that generate, reduce, and tune a dynamic model to fit frequency response data with an accurate, minimal order model. A simple, powerful graphical interface allows high order, high input/output dimensionality models to be fit with minimal user effort. Systems of over 200 states, with 10 inputs and outputs, can reliably be captured. The tuning algorithm uses a logarithmic cost that weights the error at transmission zeros on the same level as the error at poles, leading to improved accuracy at the zeros. Continuous or discrete time models can be generated, transparently to the user, for control design and implementation on a digital control computer. The high accuracy, high order models can also be used for parameter identification and model updating.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=292
Read 2 Reviews
(Added: Jan 02, 2001 Hits: 446 Rating: 0.00 Votes: 0)
Rate It
Review It
- VISION - Vehicle and electronic control module calibration and data acquisition system
VISION is a universal vehicle/ECU calibration and data acquisition system. It consists of a powerful 32-bit multi-tasking Microsoft� Windows� software program and a VISION Network Hub. Additional hardware components can be seamlessly integrated into the VISION system. These include a variety of memory emulators, data acquisition modules, and measurement instruments.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=303
Read 2 Reviews
(Added: Jan 02, 2001 Hits: 431 Rating: 0.00 Votes: 0)
Rate It
Review It
- Proteus - Rapid Prototyping for Control Systems
Proteus is a fully integrated vehicle control system that contains all the signal conditioning and output power devices to enable the rapid prototyping and control of vehicle systems. Simulink blocks are available to provide access to all the inputs and outpus of Proteus. You can create control system models using Simulink and Stateflow and then automatically generate C code using Real-Time Workshop. The control system code can then be downloaded into Proteus, which controls the real world system.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=168
Read 4 Reviews
(Added: Apr 05, 2000 Hits: 422 Rating: 0.00 Votes: 0)
Rate It
Review It
- Physical Modeling
Accelerate system-level analysis and control design with accurate and intuitive models of your physical system
The design of engineering systems requires tight integration of many engineering disciplines. To be successful, teams of engineers must collaborate using a wide array of diverse technologies. Software, in the form of control algorithms and signal processing algorithms, plays an ever increasing role in these systems. Developing software alongside the physical system results in optimized designs and the detection of errors earlier in the design process.
http://physical-modeling.mathworks.com
Read 3 Reviews
(Added: Mar 19, 2008 Hits: 393 Rating: 0.00 Votes: 0)
Rate It
Review It
- Gearshift Quality Assessment System - In-vehicle gearshift quality data acquisition and analysis system
The Gearshift Quality Assessment System is a complete system used by
the automotive industry to obtain objective measurements to classify manual gearshifts for gearbox development and competitive benchmarking. The system consists of data acquisition hardware, transducers, signal conditioning, and an A/D card. MATLAB C-MEX files are used as the common language between the A/D card and the MATLAB environment of GDAS, the data acquisition software.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=147
Read 4 Reviews
(Added: Apr 07, 2000 Hits: 388 Rating: 0.00 Votes: 0)
Rate It
Review It
- ITI-SIM
ITI-SIM is used for modeling, analyzing and optimizing dynamically stressed, complex nonlinear systems. Simulation model structures are defined interactively using a graphical user interface that allows you to select practically tested model objects from a number of physically oriented application libraries. Using known symbols and input quantities, engineers will find this a highly intuitive environment. ITI-SIM is available in German and English versions.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=296
Read 1 Reviews
(Added: Jan 02, 2001 Hits: 356 Rating: 0.00 Votes: 0)
Rate It
Review It
- RedLine ADAPT-SIM
RedLine ADAPT-SIM is a hardware and software system that allows dynamic vehicle behavior to be simulated in an engine/powertrain test cell. It combines the automation system RedLine ADAPT-DAC with MATLAB and Simulink software. The dynamic forces that a vehicle would exert on the engine during an emission-cycle test are closely duplicated in the test cell via the basic driver and vehicle models, which are part of the product.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=305
Read 4 Reviews
(Added: Jan 02, 2001 Hits: 333 Rating: 0.00 Votes: 0)
Rate It
Review It
- GURTA (Graphical Utility: Real-Time Acceleration) - Scalable high-speed digital controller/processor
GURTA is composed of an iconic GUI that manages a multiprocessor based computer engine with a multichannel analog I/O subsystem. For example, GURTA can handle 32 CPUs with 16 or more channels of 16 bit signed audio and 8 bit video. The vector/matrix libraries enable engineers to minimize algebraic algorithm programming and rapidly design, implement, and execute a broad variety of high update-rate engineering/scientific algorithms.
http://www.mathworks.com/products/connections/product_main.html?prod_id=86
Read 5 Reviews
(Added: Apr 05, 2000 Hits: 331 Rating: 0.00 Votes: 0)
Rate It
Review It
- SLR - Service Load Replication / DynoCat
SLR is used to develop real-time drive signals on a dynamometer test rig using an iterative transfer function compensation technique. SLR in conjunction with our 6000 Digital Servocontroller and DynoCat, allows for play out of the drive signals to the test rig reproduction via a user defined DynoCat sequencer.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=149
Read 5 Reviews
(Added: Apr 07, 2000 Hits: 317 Rating: 0.00 Votes: 0)
Rate It
Review It
- VISION-RP
VISION-RP is a bypass rapid prototyping system, which provides the ability for a controls engineer to implement control algorithms using the high-level Simulink graphical modeling language and run them in real time as part of complete controls system.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=463
(Added: Oct 07, 2004 Hits: 282 Rating: 0.00 Votes: 0)
Rate It
Review It
- loadMDF - MDF Measured Data Format Reader
LoadMdf allows to load into Matlab WorkSpace acquisition data contained in .DAT or .MDF files produced by ETAS INCA� tool or other program that support MDF (Measured Data Format)
http://www.gambelli.org/matlab/loadmdf
(Added: Nov 11, 2006 Hits: 259 Rating: 0.00 Votes: 0)
Rate It
Review It
- CNC
cnc machines information, center for all kinds of cnc,cnc lathe,homemadecnc,cnc articles, market place and cnc news
http://www.cnccncmachines.com/
Read 3 Reviews
(Added: Oct 18, 2007 Hits: 189 Rating: 0.00 Votes: 0)
Rate It
Review It
- Verification, Validation (V and V) and Test in Model-Based Design
Continuous test and verification is a cornerstone of Model-Based Design [http://www.mathworks.com/applications/controldesign/description/mbd.html]. Early verification and validation, also known as V and V, enables you to find errors early in the development process, when they are less costly to fix. One way that Model-Based Design achieves this efficiency is through simulation and testing.
http://www.mathworks.com/products/featured/vv/
Read 1 Reviews
(Added: Dec 18, 2007 Hits: 145 Rating: 0.00 Votes: 0)
Rate It
Review It
- Ningbo Tuopu Electric Co.,Ltd.
Ningbo Tuopu group was established in 1983,headquarter is located in Beilun, Ningbo,Zhejiang.Tuopu Electric is specialized in manufacturing of all kinds of sensors (ABS speed sensor, Position sensor, Bearing sensor, Shield sensor, etc), ABS connecting wire, side lamp wire, plastic parts, thermal-plastic elastomer parts especially in the field of vehicle spare parts for OEM and aftermarket. Importing auto parts is also the main business line of Tuopu Electric.
http://www.auto-sensor-supplier.com
Read 1 Reviews
(Added: Oct 23, 2007 Hits: 141 Rating: 0.00 Votes: 0)
Rate It
Review It
|
E-mail
this page to 
Industry Stories (11)