File Exchange
MATLAB Newsgroup
Link Exchange
Blogs
Contest
MathWorks.com

This Category
Update a Link / Bad Link
Entire Link Exchange
Most Visited Links
Most Recent Links
Top Rated Links
Active Contributors
Recent Comments
email E-mail this page to
a colleague

Simulation
 
  • MathWorks - Simulink Control Design  pop
    Simulink Control Design provides advanced functionality for performing linear analysis of nonlinear models. You can extract linear approximations of a model to analyze characteristics such as time and frequency responses and pole-zero dynamics. A graphical user interface (GUI) and programming capabilities reduce the complexity and time required to develop the linearized models.
    http://www.mathworks.com/products/simcontrol/
    Read 6 Reviews
    (Added: Jun 21, 2004 Hits: 1364 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - SimPowerSystems  pop
    SimPowerSystems models and simulates electrical power systems within the Simulink environment. It has powerful capabilities for modeling the generation, transmission, and distribution of electrical power, especially when designing associated control systems.
    http://www.mathworks.com/products/simpower/
    Read 4 Reviews
    (Added: Jan 12, 2003 Hits: 1221 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Simulink & Modeling M-files  pop
    Collection of user contributed files from the MATLAB Central File Exchange.
    http://www.mathworks.com/matlabcentral/fileexchange/loadCategory.do?objectType=category&objectId=22&objectName=Simulink
    (Added: Apr 18, 2000 Hits: 987 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Power System Toolbox  pop
    The Power System Toolbox consists of a set of MATLAB m-files which form an analysis package for power system power flow, voltage stability, small signal stability and transient stability.
    http://www.eagle.ca/~cherry/pst.htm
    Read 3 Reviews
    (Added: Aug 16, 1999 Hits: 958 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - SimMechanics  pop
    With SimMechanics, you can directly model mechanical components (bodies and joints), simulate their motion, and analyze the results all within the Simulink environment.
    http://www.mathworks.com/products/simmechanics/
    Read 3 Reviews
    (Added: Oct 24, 2003 Hits: 700 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Simulink
    Simulink is an interactive tool for modeling, simulating, and analyzing dynamic, multidomain systems. It lets you accurately describe, simulate, evaluate, and refine a system's behavior through standard and custom block libraries. Simulink integrates seamlessly with MATLAB, providing you with immediate access to an extensive range of analysis and design tools. These benefits make Simulink the tool of choice for control system design, signal processing system design, communications system design, and other simulation applications.
    http://www.mathworks.com/products/simulink/
    (Added: Jul 05, 1999 Hits: 505 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Dymola� - Dynamic Modeling Laboratory
    Dymola� is an object-oriented language and a program for modeling large systems. Reuse of modeling knowledge is supported by use of libraries containing model classes and through inheritance. The user need not convert the equations to assignment statements. This is done symbolically by Dymola. Matrix equations facilitate convenient modeling of 3-D mechanical systems, control systems, etc. Discontinuous equations and instantaneous equations are supported to model friction, impact and difference equations. Dymola automatically generates the needed time and state events.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=62
    (Added: Apr 07, 2000 Hits: 366 Rating: 0.00 Votes: 0)   Rate It   Review It
  • ADAMS/Plant and ADAMS/Controls - Easy integration of mechanical system simulation and control system
    ADAMS/Plant and ADAMS/Controls help control system developers eliminate the need to write complex equations of motion for mechanical plants. The software enables users to graphically model mechanical systems, containing a variety of constraints and force types as well as parts of arbitrary shape, then directly integrate their Simulink - developed control system models within these mechanical system designs. Users can then simulate their systems' full-motion behavior from within the Simulink environment and visualize the results using animations and plotting. Application Areas: Aerospace; Automotive; Control system design/analysis; Global Positioning Systems; Heavy machinery; Materials research; System identification;Test equipment/instruments; Thermodynamics.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=113
    (Added: Apr 07, 2000 Hits: 304 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Simulink Parameter Estimation
    Simulink Parameter Estimation is a tool that helps you calibrate the response of your Simulink model to the outputs of a physical system, eliminating the need to tune model parameters by trial and error or develop your own optimization routines.
    http://www.mathworks.com/products/simparameter/
    Read 3 Reviews
    (Added: Jun 21, 2004 Hits: 304 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Working Model 2D - Software for motion simulation and analysis of mechanical systems on desktop computers
    Working Model 2D is an award-winning motion simulation package that allows engineers, designers, and animators to build and analyze mechanical systems quickly on desktop computers. Users can import geometries from popular CAD systems or draw them in Working Model 2D. Click the Run button and watch your designs spring to life. Interface MATLAB to Working Model 2D and start simulating how your control systems behave when driving a real mechanical system. Working Model 2D communicates with MATLAB in real time, so your control system can receive measurement information from Working Model 2D and send control signals back while you watch the mechanical system move on your PC.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=100
    (Added: Apr 07, 2000 Hits: 302 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - SimDriveline
    SimDriveline extends Simulink� with tools for modeling and simulating the mechanics of driveline (drivetrain) systems. These tools include components such as gears, rotating shafts, and clutches; standard transmission templates; and engine and tire models.
    http://www.mathworks.com/products/simdrive/
    (Added: Aug 06, 2004 Hits: 276 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Free Online Seminar: Using SimMechanics, SimDriveline, and SimPowerSystems
    Learn how Simulink enables faster and more effective development of electrical and mechanical systems through simulation. MathWorks engineers show how to build mechanical models using SimMechanics, powertrain and driveline models using SimDriveline, and electric circuit and power management models using SimPowerSystems. We demonstrate how to access these products through the Simulink interface, and integrate them with other tools in the MATLAB and Simulink product families.
    http://www.mathworks.com/mtd8221
    (Added: Nov 19, 2004 Hits: 241 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Ptolemy Simulation Engine
    Ptolemy Simulation Engine - Ptolemy Simulation Engine - Ptolemy is a full simulation suite and code generation tool from UC Berkeley. Ptolemy Classic, written in C/C++, can incorporate MATLAB tools as needed. Ptolemy II, written in Java, has an interface to MATLAB.
    http://ptolemy.eecs.berkeley.edu/
    (Added: Apr 11, 2000 Hits: 228 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Free MathWorks Online Seminar: Using SimPowerSystems in Electro-Mechanical Applications
    Learn how Simulink enables faster and more effective development of electro-mechanical systems through simulation. MathWorks engineers will show how to build electric circuit and power management models using SimPowerSystems. We will demonstrate how to include these models, through the Simulink interface, with broader electro-mechanical system models, with mechanical components modeled with the products SimMechanics and SimDriveline.
    http://www.mathworks.com/mtd8636
    (Added: May 02, 2005 Hits: 223 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MECHMACS�Mechanical Macros - A library of mechanical building blocks for use with Simulink
    Each of these building blocks consists of several components and a dialog box for the block parameters, which describes the dynamic behavior of the system under induced displacements, velocities, and external forces. By connecting these blocks in Simulink, it is easy to build complex mechanical chain structures and analyze the resulting system in the time domain.
    http://www-europe.mathworks.com/products/connections/product_main.shtml?prod_id=29
    (Added: Apr 07, 2000 Hits: 223 Rating: 0.00 Votes: 0)   Rate It   Review It
  • IDCON - Identification of continuous-time dynamic systems
    IDCON provides powerful and industry-proven methods for experimental modeling, i.e., for identification of dynamic systems based on measured data especially with arbitrarily varying input signals or frequency response data. Additionally, IDCON provides functions for filtering noisy signals and calculating pure time-delay approximations and graphical filter design. The filter characteristics for filter design may be determined easily via graphical definition of the desired amplitude response. The resulting mathematical models describe the system in frequency domain as a transfer function. The use of IDCON is not limited to any application area.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=52
    (Added: Apr 07, 2000 Hits: 211 Rating: 0.00 Votes: 0)   Rate It   Review It
  • SimEx
    SimEx converts model data from Simulink/Stateflow� into the universally used XML format. Thus, SimEx enables an integrated tool environment in the field of model-based software development.
    http://www.itpower.de/simex_e.html
    Read 2 Reviews
    (Added: Dec 10, 2003 Hits: 192 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Consulting and Model Development - Multi-disciplined model development
    MPR can develop and validate models of any equipment or system used in electrical generating stations (diesel, combustion turbine, steam cycle, combined cycle, and others), chemical process plants, pharmaceutical manufacturing facilities, and marine installations. We can develop these models as part of your modeling efforts, develop the complete model for distribution within your organization, or develop the model and perform the analysis. We also build complete user interfaces for your application, making the detailed code user-transparent. We have extensive experience with compiling MATLAB/Simulink codes as well as a vast library of existing models. Finally, MPR produces software-based "trainers" used to train operators on equipment operation and tuning.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=119
    (Added: Apr 07, 2000 Hits: 189 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Stateflow
    Stateflow is an interactive design tool for modeling and simulating event-driven systems. Tightly integrated with Simulink and MATLAB, Stateflow provides an elegant solution for designing embedded systems that contain control, supervisory, or mode logic. Its combination of graphical modeling and animated simulation brings system specification and design closer together.
    http://www.mathworks.com/products/stateflow/
    (Added: May 28, 2000 Hits: 177 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Active-HDL to MATLAB�/Simulink� Interface
    Active-HDL provides an interface to MATLAB ver. 6.5 and Simulink ver. 5.0 simulation environment, which allows co-simulation of functional blocks described by using mathematical formulas, behavioral models and hardware description languages.
    http://www.aldec.com/Support/Application_Notes/knowledgebase/AN0164_Simulink_Interface.htm
    (Added: Aug 30, 2004 Hits: 172 Rating: 0.00 Votes: 0)   Rate It   Review It
  • DUBSI, a Simulink Blockset
    The Dutchroll Blockset for Simulink (DUBSI), version 1.0, is a generic blockset with a number of useful Simulink blocks. Included are several source signals, switches, new To Workspace blocks, variable gains, rotations, a useful Moving Average filter and a 'soft limiter', plus detailed HTML documentation.
    http://dubsi.dutchroll.com
    (Added: Jun 28, 2002 Hits: 159 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Simulink Verification and Validation
    Expands the Simulink development environment by measuring test completeness. It enables requirements-based testing of your designs and lets you identify inadequate requirements, unnecessary constructs, and design flaws.
    http://www.mathworks.com/products/simverification
    (Added: Jun 01, 2004 Hits: 158 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Simulink Response Optimization
    Simulink Response Optimization is a tool that helps you tune design parameters in Simulink models by optimizing time-based signals to meet user-defined constraints. It optimizes scalar, vector, and matrix-type variables and constrains multiple signals at any level in the model.
    http://www.mathworks.com/products/simresponse/
    Read 1 Reviews
    (Added: May 06, 2001 Hits: 153 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Transient Performance Advisor� - The master modeling and simulation software
    Transient Performance Advisor� (TPA) provides the user with a wide variety of pre-defined and validated models which cover a broad range of disciplines. TPA is available as individual blocksets or custom-configured with a user interface for your specific system design. Three of the biggest strengths of TPA are validation, first principles models, and diversity. All libraries in TPA are validated over all expected ranges of operation by industry-recognized experts. MPR uses a first-principles approach for all models, minimizing the use of approximations and look-up tables and allowing you to study many second- and third-order effects. TPA also contains models from a wide variety of disciplines.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=118
    (Added: Apr 07, 2000 Hits: 152 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Simulink Accelerator
    The Simulink Accelerator increases the simulation speed of your model by accelerating model execution and using model profiling to help you identify performance bottlenecks.
    http://www.mathworks.com/products/simaccelerator/
    (Added: Jun 21, 2004 Hits: 146 Rating: 0.00 Votes: 0)   Rate It   Review It
  • SLATE - Product development automation software
    SLATE (System Level Automation Tool for Engineers) is computer-aided engineering groupware for system designers. SLATE accelerates the design process by managing the entire design life cycle, from pre-proposal and proposal through implementation. SLATE's life cycle management functions include facilitating the major design tasks such as design capture, decomposition, partitioning, performance allocation and analysis, verification and simulation, requirement capture and tracking, document generation as well as supporting multiple design objectives (such as cost, reliability, and safety) required for a successful product.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=172
    (Added: Apr 07, 2000 Hits: 146 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Altia Design - Optimize the value of your simulation models
    Altia Design is simulation graphics software that helps engineers quickly build a real-time, interactive control, and visualization graphical user interface (GUI) for their Simulink, Stateflow, and dSPACE models. This GUI, which looks and behaves like the product's real user interface, makes model design, debug, and test significantly more accurate, efficient, and easy to communicate. Altia graphics can be connected to simulators covering a wide range of engineering disciplines, from control systems modeling to software engineering and industrial design.
    http://www.mathworks.com/products/connections/product_main.html?prod_id=14
    (Added: Apr 07, 2000 Hits: 141 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Verification, Validation (V and V) and Test in Model-Based Design
    Continuous test and verification is a cornerstone of Model-Based Design [http://www.mathworks.com/applications/controldesign/description/mbd.html]. Early verification and validation, also known as V and V, enables you to find errors early in the development process, when they are less costly to fix. One way that Model-Based Design achieves this efficiency is through simulation and testing.
    http://www.mathworks.com/products/featured/vv/
    Read 1 Reviews
    (Added: Dec 18, 2007 Hits: 139 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Podium Technology StructureLib
    StructureLib enables the ability to pass around any data structure around Simulink models. This greatly simplifies the writing of S-Functions as a single data structure can be passed out rather than hugh numbers of individual ports. In the S-Function you can work with the 'C' structure, which can consist of any Simulink data type, nested structures (to any depth) or bitwords (bits within unsigned integer).
    http://www.podiumtechnology.co.uk/structurelib.shtml
    (Added: Dec 10, 2003 Hits: 130 Rating: 0.00 Votes: 0)   Rate It   Review It
  • EuroSim�
    EuroSim� allows the user, by means of an extensive Graphical User Interface, to define and create simulation models, scan ANSI-C and F77 source code for global data variables, and translate the simulation models into an executable simulator. The simulator can then be used to perform simulations with man-in-the-loop in non-real time and hardware-in-the-loop in real time.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=365
    (Added: Apr 05, 2000 Hits: 128 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Stateflow Coder
    Available separately for use with Stateflow, Stateflow Coder generates highly efficient integer or floating-point C code for stand-alone targets.
    http://www.mathworks.com/products/sfcoder/
    (Added: May 06, 2001 Hits: 121 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Simulation of Electric Machine and Drive Systems
    This package presents computer models of electric machines based on the space vector formulation leading to the assessment of the dynamic performance of open- and closed-loop ac and dc drive systems. The Simulink/Matlab implementation is adopted because of its inherent integration of vectorized system representations in block diagram form, of numerical analysis methods, of graphical portrayal of time evolutions of signals combined with the simple realization of the functionality of controllers and power electronic excitations. The development of Simulink models of drive assemblies is a relatively simple task consisting of combining input-output block representation of the various components making up the system; these blocks can readily be reused (utilizing standard copy-and-paste techniques) to modify the system components or the configuration of the system. This approach provides a powerful design tool because of the ease of observing the effects of parameters modifications and of differing system configurations and control strategies.
    http://www.ece.umn.edu/users/riaz/
    (Added: Dec 12, 2007 Hits: 119 Rating: 0.00 Votes: 0)   Rate It   Review It
  • MathWorks - Simulink Fixed Point
    Simulink Fixed Point enables the intrinsic fixed-point capabilities of the Simulink product family, letting you design control and signal processing systems that will be implemented using fixed-point arithmetic.
    http://www.mathworks.com/products/simfixed/
    (Added: Jun 21, 2004 Hits: 115 Rating: 0.00 Votes: 0)   Rate It   Review It
  • Qua.Si. III Qualitative Simulator
    Qua.Si. III is a software tool for the simulation of continuous dynamical systems whose parameters and/or initial conditions are modelled by fuzzy distributions.
    http://iridia.ulb.ac.be/~gbonte/software/Quasi/Quasi.html
    (Added: Feb 26, 2001 Hits: 115 Rating: 0.00 Votes: 0)   Rate It   Review It
  • TTP-Calibrate - TTP calibration and monitoring tool
    TTP-Calibrate is a powerful tool for calibrating and monitoring distributed real-time systems that are executed on several control units in a network. TTP-Calibrate works directly from the Simulink model and has the potential to run on any time-triggered architecture as well.
    http://www.mathworks.com/products/connections/product_main.shtml?prod_id=539
    (Added: Jul 01, 2004 Hits: 114 Rating: 0.00 Votes: 0)   Rate It   Review It
  • DECOMSYS
    Simulink blocksets used by control engineers to design and simulate communication systems. They contain blocks for triggered protocol TTP and include support for reading and writing messages of simulated communication systems, allowing users to develop distributed applications that use a specified protocol.
    http://www.decomsys.com/
    (Added: Oct 15, 2002 Hits: 109 Rating: 0.00 Votes: 0)   Rate It   Review It

Public Viewings and Use Policy for the MATLAB Central Link Exchange
NOTICE: This MATLAB Central portion of The MathWorks' site provides links to other third-party World Wide Web sites or resources. If you visit one of these sites, please note that we do not control their privacy pratices. Therefore we urge you to learn about their privacy practices before leaving any information with them. The MathWorks does not control the content posted on linked sites and, as such, does not guarantee the accuarcy, integrity, or quality of such content.
Read the complete Disclaimer prior to use.
Related Topics