- Control System M-files
pop
User contributed control system m-files from the MATLAB Central File Exchange.
http://www.mathworks.com/matlabcentral/fileexchange/loadCategory.do?objectType=category&objectId=103
Read 3 Reviews
(Added: Apr 18, 2000 Hits: 2252 Rating: 0.00 Votes: 0)
Rate It
Review It
- Feedback Control Experiments - Experiments for feedback control education and research
pop
Quanser Consulting, Inc., offers a complete line of feedback control experiments. The systems are robust, durable, and modular thus allowing you to reconfigure the same plant to obtain various experiments. Our experiments include the Inverted Pendulum, the Ball and Beam, the Seesaw/Pendulum MIMO experiment, and the Helicopter. All systems are equipped with quick-connect cabling, source code in C, handbooks, system modeling, and control system design files written in Maple, MATLAB, and Simulink. Capture your students' interest while teaching them well-established principles or give your research project an edge by implementing the new control strategies you are developing.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=142
Read 3 Reviews
(Added: Apr 07, 2000 Hits: 1421 Rating: 0.00 Votes: 0)
Rate It
Review It
- System Identification M-files
pop
User contributed System identification m-files from the MATLAB Central File Exchange.
http://www.mathworks.com/matlabcentral/fileexchange/loadCategory.do?objectType=category&objectId=12&objectName=System%20Identification
Read 3 Reviews
(Added: Apr 18, 2000 Hits: 1096 Rating: 0.00 Votes: 0)
Rate It
Review It
- HyPneu - Hydraulic and pneumatic co-simulation with Simulink
pop
HyPneu Fluid Power Design Software allows the designer to develop a graphical representation of a hydraulic and/or pneumatic system and perform dynamic and steady-state simulations. HyPneu processes the information in the graphical schematic, allows the user to assign specific components to the system, runs both steady state and dynamic simulations of the system, and displays the results in a meaningful manner.
http://www.bardyne.com/fluid-power-software/default.htm
Read 2 Reviews
(Added: Jul 01, 2004 Hits: 1025 Rating: 0.00 Votes: 0)
Rate It
Review It
- FLOWMASTER - Fluid Systems Simulation
pop
An interactive fluid flow analysis package that simulates one dimensional flow and heat transfer in pipes, passages, and fittings. Flowmaster can perform a co-simulation analysis with MATLAB and Simulink allowing detailed modeling of the complete fluid and control systems.
http://www.flowmaster.com/
Read 3 Reviews
(Added: Jul 12, 2002 Hits: 983 Rating: 0.00 Votes: 0)
Rate It
Review It
- ACD - Automatic controller design and automatic robus controller design
pop
ACD automatically calculates the parameters for well-known compensator types (P, PI, PD, PID) or alternatively for a generalized controller of user-defined order. The controller parameters are optimized with respect to a plant model and additional user options. The desired time-domain closed loop behavior is considered and may be defined graphically by a goal curve for the desired closed loop step response. Additionally, ACD provides the parameters for an ti-Reset-Windup compensator structure to avoid undesired windup effects of compensators with integral parts.
http://www.mathworks.com/products/connections/product_main.html?prod_id=50
(Added: Apr 07, 2000 Hits: 975 Rating: 0.00 Votes: 0)
Rate It
Review It
- MATLAB Tutorial for Process Control
pop
The purpose of this tutorial is to familiarize the user to working in MATLAB. MATLAB is a high-level programming environment that processes arrays and matrices and provides a powerful graphical environment. A high-level programming environment allows the users to program without worrying about declaring variables, allocating memory, using pointers, and compiling code and other routine tasks, which are associated with languages such as FORTRAN and C. MATLAB also incorporates many built in functions that can perform a variety of complex mathematical routines, from finding eigenvalues to solving differential equations. Additional information can be found by using MATLAB�s extensive help library.
http://www.chee.iit.edu/~cinar/courses/tutor_ac.html
Read 12 Reviews
(Added: Sep 12, 2005 Hits: 930 Rating: 0.00 Votes: 0)
Rate It
Review It
- MathWorks - Model Based Calibration Toolbox
pop
The Model-Based Calibration Toolbox provides design tools for the calibration of powertrain systems. The toolbox is built on the high-performance technical computing environment of MATLAB as well as the simulation capabilities of Simulink. The Model-Based Calibration Toolbox reduces dynamometer testing time, increases engineering productivity, saves calibration time, and has the potential to improve powertrain performance and reliability.
http://www.mathworks.com/products/mbc/
Read 6 Reviews
(Added: Jul 02, 1999 Hits: 913 Rating: 0.00 Votes: 0)
Rate It
Review It
- MathWorks - System Identification Toolbox
pop
The System Identification Toolbox provides tools for creating mathematical models of dynamic systems based on observed input/output data. The Toolbox features a flexible graphical user
interface that aids in the organization of data and models. The identification techniques provided with this Toolbox are useful for applications ranging from control system design and signal processing to time-series analysis and vibration analysis.
http://www.mathworks.com/products/sysid/
Read 3 Reviews
(Added: Jul 02, 1999 Hits: 765 Rating: 0.00 Votes: 0)
Rate It
Review It
- Nonlinear Synthesis Tools
pop
The Nonlinear Synthesis Tools allow the user to design nonlinear control systems using a simulation model of the dynamic system as the starting point. The simulation models can be built using MATLAB or Simulink. No symbolic manipulations are required for control system synthesis. Using a GUI, the user selects a nonlinear system design method and provides the appropriate design parameters. The software delivers nonlinear controller designs in the form of an M-file or C code. This code can be coupled to the MATLAB/Simulink simulation model to assess the closed-loop performance of the dynamic system.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=306
Read 2 Reviews
(Added: Jan 02, 2001 Hits: 747 Rating: 0.00 Votes: 0)
Rate It
Review It
- Multi-Parametric Toolbox
pop
The Multi-Parametric Toolbox is a MATLAB toolbox primarily focused on multi-parametric linear and quadratic optimization, optimal control of linear and hybrid systems with constraints as well as computational geometry. The algorithms are based on very recent theoretical advances made in respective fields, tuned up for performance and numerical robustness. The toolbox offers a unified interface to numerous state-of-the-art optimization packages and excellent visualization capabilities.
http://control.ee.ethz.ch/~mpt/
Read 3 Reviews
(Added: Jul 09, 2004 Hits: 694 Rating: 0.00 Votes: 0)
Rate It
Review It
- MathWorks - Model Predictive Control Toolbox
The Model Predictive Control Toolbox is a complete set of tools for implementing model predictive control strategies. These techniques were developed to address the practical issues associated with the control of large, multivariable processes where there are constraints on the manipulated and controlled variables. Model predictive control methods are typically used in chemical engineering and other continuous process control industries.
http://www.mathworks.com/products/mpc/
Read 3 Reviews
(Added: Aug 28, 2000 Hits: 683 Rating: 0.00 Votes: 0)
Rate It
Review It
- RIOTS: The Most Powerful Optimal Control Problem Solver
RIOTS is a group of programs and utilities, written mostly in C and designed as a toolbox for MATLAB, that provides an interactive environment for solving a very broad class of finite-horizon optimal multi-variable control problems. This class includes problems with: Lagrange, Bolza and Mayer type objective functions, Linear or Nonlinear dynamics, Min-Max objective functions, Free final time problems, Variable initial conditions, Endpoint equality and inequality constraints, Trajectory inequality constraints on the states and controls, Simple bounds on the controls and free initial conditions.
http://www.accesscom.com/~adam/RIOTS/
(Added: Jun 30, 1999 Hits: 654 Rating: 0.00 Votes: 0)
Rate It
Review It
- Digital Pendulum Control System - Contemporary integrated system solution of classic Inverted Pendulum control problem
The 33-005 Pendulum is a contemporary version of the classic control problem. It is large enough to be convincing, durable enough to survive the hazards of a student laboratory, and open enough for design studies. A twin-arm pendulum pivots freely on a small cart running on an elevated two-rail track. Encoders give the angular position of the pendulum and the linear position of the cart software derives velocity and acceleration for both items. A real-time kernel operating under Windows handles interprocess communication.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=72
Read 3 Reviews
(Added: Apr 07, 2000 Hits: 606 Rating: 0.00 Votes: 0)
Rate It
Review It
- PolePack
In this Package we solve the Pole Placement problem associated with several Dynamic systems. More specifically we solve the Pole Placement problem for Multi and Single-input, Descriptor and nonDescriptor systems using State and Output Feedback. The Eigenstructure Assignment problem is also solved for Descriptor Systems using State Feedback. There are also programs that compute Controllability forms for some of the above systems as well as the Distances from the nearest uncontrollable systems. A readme.txt and a demo.m file may also be found in the package.
http://www.mathtools.net/files/net/polepack.zip
Read 3 Reviews
(Added: Aug 12, 1999 Hits: 551 Rating: 0.00 Votes: 0)
Rate It
Review It
- Asymptotic Bode Plots
A MATLAB GUI that decomposes a transfer function into its constituent poles and zeros, and then displays the asymptotic approximation for each.
http://www.swarthmore.edu/NatSci/echeeve1/Ref/Bode/BodePlotGui.html
Read 6 Reviews
(Added: Dec 10, 2002 Hits: 533 Rating: 0.00 Votes: 0)
Rate It
Review It
- MathWorks - Robust Control Toolbox
The Robust Control Toolbox provides tools for the design and analysis of multivariable control systems where robustness is a concern. This includes systems where there may be modeling errors, dynamics that are not completely known, or parameters that can vary during the lifespan of the product. The powerful algorithms in this toolbox allow you to perform complex calculations while considering a number of parameter variations.
http://www.mathworks.com/products/robust/
Read 3 Reviews
(Added: Jul 02, 1999 Hits: 522 Rating: 0.00 Votes: 0)
Rate It
Review It
- Experimental Control System Workstations
Educational Control Products (ECP) provides advanced laboratory equipment for the study of feedback control systems. Each apparatus may be transformed into several dynamically distinct plants so that one system does the work of many. Most systems can be easily reconfigured for simple SISO to complex MIMO operation. A high-speed I/O control board and powerful GUI-driven interface software allow you to efficiently implement virtually any controller and easily maneuver the system through trajectories to characterize performance. Experiments are provided that cover important introductory through intermediate control system principles and include complete instructor solutions. The systems are used for teaching and research in over 400 universities and industrial sites worldwide. They are used extensively in undergraduate control systems laboratories as well as graduate research and industrial motion control training.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=312
Read 3 Reviews
(Added: Jan 02, 2001 Hits: 505 Rating: 0.00 Votes: 0)
Rate It
Review It
- MMLE3 Identification Toolbox - Specialized function for estimation of continuous-time state-space models
The MMLE3 Identification Toolbox is a MATLAB function to identify the parameters in a continuous linear time-invariant, multi-input/multi-output, state-space system model, using either the maximum likelihood method or the output error method. The primary outputs of the identification process are: parameter values, filtered and unfiltered Cramer-Rao bounds, sensitivities, and geometric dilution of precision (GDOP).
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=44
Read 1 Reviews
(Added: Apr 07, 2000 Hits: 458 Rating: 0.00 Votes: 0)
Rate It
Review It
- DSPT SigLab
For applications like DSP design verification, noise/vibration analysis, modal analysis and control system design and more, SigLab is an ideal tool for characterizing signals and systems in the lab or field. Set up and control of all measurements are through point and click Virtual Instruments (VIs) coded in MATLAB.
http://www.spectraldynamics.com/frtptsov.htm
Read 1 Reviews
(Added: May 14, 2003 Hits: 456 Rating: 0.00 Votes: 0)
Rate It
Review It
- Ezera toolbox
EZera is a gui set of routines to easily create a state space realization of an LTI system from a set of measured frequency response functions (frfs). The method is based on the Eigenstructure Realization Algorithm (ERA). Requires signal processing toolbox.
http://www.mathtools.net/files/net/ezera.zip
Read 5 Reviews
(Added: Aug 05, 1999 Hits: 430 Rating: 0.00 Votes: 0)
Rate It
Review It
- Robotics Toolbox for Matlab
Mature routines for serial link manipulators: forward and inverse kinematics, foward and inverse dynamics, graphical animation, Simulink interface etc.
http://www.petercorke.com/Robotics%20Toolbox.html
Read 1 Reviews
(Added: Jan 21, 2007 Hits: 414 Rating: 0.00 Votes: 0)
Rate It
Review It
- Free Online MathWorks Seminar: Production Code Coaching - Advanced Software Design
In this webinar you will learn how Simulink and Real-Time Workshop Embedded Coder enable you to quickly design and deploy C code for use in embedded production systems. It is the third in a series of five Webinars. Most of the materials will be presented by MathWorks developers Basic knowledge of Simulink is helpful but not required. This webinar is important for engineers and managers who work on software development projects for embedded systems.
http://www.mathworks.com/mtd6990
Read 3 Reviews
(Added: Jun 24, 2004 Hits: 401 Rating: 0.00 Votes: 0)
Rate It
Review It
- Physical Modeling
Accelerate system-level analysis and control design with accurate and intuitive models of your physical system
The design of engineering systems requires tight integration of many engineering disciplines. To be successful, teams of engineers must collaborate using a wide array of diverse technologies. Software, in the form of control algorithms and signal processing algorithms, plays an ever increasing role in these systems. Developing software alongside the physical system results in optimized designs and the detection of errors earlier in the design process.
http://physical-modeling.mathworks.com
Read 3 Reviews
(Added: Mar 19, 2008 Hits: 355 Rating: 0.00 Votes: 0)
Rate It
Review It
- ControlShell, a software development
ControlShell is an application framework designed explicitly for software development of control and simulation systems. With complex systems, you not only need to do control algorithms and modeling, you also need to write a lot of software. ControlShell deals with intelligent subsystems, wraps legacy code, and easily incorporates complex, custom modules. Its component-based, object-oriented methodology is ideal for intelligent controls and simulation programming.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=255
Read 1 Reviews
(Added: Jan 02, 2001 Hits: 342 Rating: 0.00 Votes: 0)
Rate It
Review It
- Concurrent RT-LAB RLX for RedHawk Linux
Concurrent Computer Corporation�s RT-LAB RLX allows design engineers to perform complex simulation, rapid prototyping, and hardware-in-the-loop testing on Concurrent iHawk� Linux�-based real-time multiprocessing systems.
http://www.mathworks.com/products/connections/product_main.shtml?prod_id=581
Read 3 Reviews
(Added: Jul 01, 2004 Hits: 339 Rating: 0.00 Votes: 0)
Rate It
Review It
- XdTech
XdTech has in its range both classical and new types of control laboratory experimental systems. These devices can be used as effective and affordable educational tools for learning digital control of unstable systems using MATLAB's Real time Workshop application program.
http://www.xdtech.com/
Read 2 Reviews
(Added: Aug 11, 2003 Hits: 322 Rating: 0.00 Votes: 0)
Rate It
Review It
- Free Online MathWorks Seminar: Production Code Coaching Session - Basic Software Deployment
In this webinar you will learn how Simulink and Real-Time Workshop Embedded Coder enable you to quickly design and deploy C code for use in embedded production systems. It is the second in a series of five Webinars. Most of the materials will be presented by MathWorks developers Basic knowledge of Simulink is helpful but not required. This webinar is important for engineers and managers who work on software development projects for embedded systems.
http://www.mathworks.com/mtd6947
Read 2 Reviews
(Added: Mar 18, 2004 Hits: 312 Rating: 0.00 Votes: 0)
Rate It
Review It
- Nullification Toolbox
State nullification is a new approach to stabilization. Using the power of digital control, exact stabilization by output feedback is achievable. For example, we can completely stop the swing of a pendulum in three sampling periods using only the displacement (and not the speed) for feedback.
http://www.wisdom.weizmann.ac.il/~gera/NullificationToolbox/NullificationToolbox.html
Read 9 Reviews
(Added: May 23, 2006 Hits: 286 Rating: 0.00 Votes: 0)
Rate It
Review It
- Multivariate Metamodeling Toolbox
The Matlab Multivariate Metamodeling toolbox (M3-Toolbox) provides a pluggable, extensible, configurable, flexible and adaptive platform for creating global surrogate models (metamodels) as efficiently as possible. Different model types (neural net, SVM, rational functions,...) are supported as well as different modeling algorithms, sample selection algorithms, model scoring mechanisms as well as distributed sample evaluation.
http://www.coms.ua.ac.be/?q=m3_toolbox
(Added: Nov 16, 2006 Hits: 236 Rating: 0.00 Votes: 0)
Rate It
Review It
- MPCtools: A toolbox for simulation of MPC controllers in Matlab
MPCtools is a freely available Matlab/Simulink-based toolbox for simulation of MPC controllers. MPCtools provides easy to use functions to create and simulate basic MPC controllers based on linear state space models.
The key features of the toolbox include:
- Support for linear state space models for prediction
- Quadratic cost function
- Linear inequality constraints on states and controls
- Observer support for state and disturbance estimation
- Integral action by means of disturbance estimation
- Two different QP solvers for solving the optimization problem
http://www.control.lth.se/user/johan.akesson/mpctools/index.html
Read 5 Reviews
(Added: Jun 17, 2007 Hits: 180 Rating: 0.00 Votes: 0)
Rate It
Review It
- Getting Started with Simulink Demo Video
This video demo gets you started with Simulink. It takes you through many key concepts in building and simulating a model. We will build up a model from scratch while taking you through a number of features of Simulink.
http://www.mathworks.com/demos/getting_started_with_simulink_demo_video.html
Read 4 Reviews
(Added: Apr 14, 2008 Hits: 159 Rating: 0.00 Votes: 0)
Rate It
Review It
|
Update a Link /
Bad Link
E-mail
this page to 
