See the 3 DOF Gyroscope from another perspective. Use visualization tools within QUARC® to run a real-time virtual environment simulation of the device in parallel to the actual controller commanding the plant. The Virtual Plant Simulation (VPS) may be used independently to examine the designed controller on a graphical and accurate simulation. This enables you to implement the real-time control algorithm without any need for hardware-in-the-loop components. The result? This simulation module addresses the traditional "theory to practice" control design cycle - modeling, design, simulation and implementation. The Virtual Plant Simulation is included in the 3 DOF Gyroscope Hardware-in-the-Loop solution or can be purchased separately. Visit http://www.quanser.com/mcc for more info
A tag is like a keyword or category label attached to an entry in the Link Exchange. Tags make it easier to find or recall particular links of interest. They're also a good way to categorize your bookmarked items, so you can browse your bookmarks by subject.
Tags benefit the community, too. Anyone who is logged in can tag a Link Exchange item. This means that tagging provides a way to see the big trends in Link Exchange content.
What makes a good tag?
A good tag helps people find the entry. When you tag a link, think about how you might search for that link in the future. Try tagging with several relevant terms, even if they're unrelated to one another. For example, you might want search for a link using either "video" or "image processing" as the tag search term, so it's a good idea to apply both of those tags. Go ahead and experiment with tag searches — it's the best way to learn what tagging is all about. Try adding and deleting tags, too.
How to Tag
Tag your new submission
Start typing in the Tag box, or click on a tag from the list that displays near the box. If you change your mind, click again to remove the tag from your list. Tags are separated by commas. If you want to apply a tag that uses more than one word, make sure there are no commas in the tag itself. Otherwise, the tag will be divided up into multiple tags. Note that when you search for a multi-word tag, you must enclose it in quotes.
Tag an existing link
You can add a tag to an existing entry on the View Link page. Scroll down to the Tags for this Link heading. Click on Add Tags link and type a new tag.