Using VTI EX7000 switch from MATLAB

http://www.mathworks.com/vtiredirect2

First submitted by The Instrument Control Team on 19 Jul 2011

VTI EX7000 instrument driver

Rate this link

5 clicks (last 30 days)

Tags for This LinkHelp

Everyone’s Tags

Descriptions and Ratings (1)

Date	Contributor	Description	Rating
19 Jul 2011	The Instrument Control Team	The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA. This links to an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. This driver is for use with VTI EX7000 switch. For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument

19 Jul 2011

The Instrument Control Team

The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.

This links to an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. This driver is for use with VTI EX7000 switch.

For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi

For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument

Please login to add a description or rating.

Tag Activity

Tag	Applied By	Date/Time
instrument driver	The Instrument Control Team	19 Jul 2011 at 12:07pm
switch	The Instrument Control Team	19 Jul 2011 at 12:07pm
ex7000	The Instrument Control Team	19 Jul 2011 at 12:07pm
ivi	The Instrument Control Team	19 Jul 2011 at 12:07pm
vti instruments	The Instrument Control Team	19 Jul 2011 at 12:07pm