The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.
This links to the IVI driver registry where an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher can be found. This driver is for use with the listed Advantest digital multimeters.
For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi
For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument