Using Agilent M9168C programmable attenuator from MATLAB

The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.

This links to an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. This driver is for use with Agilent M9168C prgrammable attenuator.

For additional information on working with IVI instrument drivers or SCPI commands, visit http://www.mathworks.com/ivi or http://www.mathworks.com/scpi

For general information about the Instrument Control Toolbox, visit http://www.mathworks.com/products/instrument