MATLAB Central Newsreader - USB interface with MATLAB

USB interface with MATLAB

Parth Desai — Mon, 22 Dec 2008 13:57:02 -0500

Hi.

I am a novice in the use of Matlab. I am trying to send 8/16 bit codes to the USB port of the PC using matlab. I have no clue whether the USb port can be interfaced with the matlab. The codes are generated internally generated using a code generator logic. The output codes are to be give to a wireless transmitter. Can u suggest any ways to do it?? Is there any manual to be referred??

Thanks.

Re: USB interface with MATLAB

Huge Ackman — Mon, 22 Dec 2008 17:03:12 -0500

Parth Desai wrote on 22-Dec-08 05:57 :
> Hi.
>
> I am a novice in the use of Matlab. I am trying to send 8/16 bit codes to the USB port of the PC using matlab. I have no clue whether the USb port can be interfaced with the matlab. The codes are generated internally generated using a code generator logic. The output codes are to be give to a wireless transmitter. Can u suggest any ways to do it?? Is there any manual to be referred??

Results 1 - 10 of about 1,020,000 for matlab and usb. (0.15 seconds)

> Thanks.

you're welcome.

Re: USB interface with MATLAB

Anupam Kumar — Mon, 22 Dec 2008 17:06:37 -0500

May this help................

Read documentary over VISA.
USB Interfacing is being described in Instrument Control Toolbox.

Re: USB interface with MATLAB

hrh1818 — Mon, 22 Dec 2008 17:07:42 -0500

On Dec 22, 7:57=A0am, "Parth Desai" <parth1...@yahoo.com> wrote:
> Hi.
>
> I am a novice in the use of Matlab. I am trying to send 8/16 bit codes to=
the USB port of the PC using matlab. I have no clue whether the USb port c=
an be interfaced with the matlab. The codes are generated internally genera=
ted using a code generator logic. The output codes are to be give to a wire=
less transmitter. Can u suggest any ways to do it?? Is there any manual to =
be referred??
>
> Thanks.

One possible way is to use a USB to serial port adapter. An adapter
costs about US$30.00. Then use the serial I/O capability built into
Matlab to write to a serial port. In the Matlab help file look up
Serial I/O to find information on how to use a serial I/O port. To
find out out what COM port to write to select Control Panel | System |
Hardware Tab | Device Manager. Click on the + sign next to "Ports".
In the list you should see something like COM9,

Howard