From: MatLab <jr147@msstate.edu>
Path: news.mathworks.com!newsfeed-00.mathworks.com!webcrossing
Newsgroups: comp.soft-sys.matlab
Subject: Re: MatLab Compiler
Message-ID: <ef5b10f.3@webcrossing.raydaftYaTP>
Date: Wed, 20 Jun 2007 09:12:37 -0400
References: <ef5b10f.-1@webcrossing.raydaftYaTP> <ef5b10f.1@webcrossing.raydaftYaTP>
Lines: 48
NNTP-Posting-Host: 128.158.209.36
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 8bit
Xref: news.mathworks.com comp.soft-sys.matlab:414880


That's what somebody at work told me a day or so ago. He said that I
could create stand-alone excutables with the mcc command in MatLab. I
told another guy who was helponig me with MatLab, that I used the
compiler that was built into my MatLab v7.0. He said that he thought
even with version 7.0 an add on compiler was needed. I have
successfully created an excutable with the mcc function of MatLab. My
new question is this what is meant by a stand alone excutable. Also,
whenever I tried running the excutable on another computer that
didn't have MatLab, the file didn't work.

sandeep patil wrote:

>
>
> hi,
> you can use the command( in matlab): mcc
>
> Madincea Vasile wrote:
>>
>>
>> there is no free compiler, only the compiler from the
mathworks,
>> for
>> which you need a license...
>>
>> Ender wrote:
>>>
>>>
>>> I am trying to convert matlab.m files into stand-alone
>> excutables.
>>> I
>>> was told by numerous people that a compiler was needed to
do
>> this.
>>> I
>>> want to know if there is a free compiler that will allow me
> to
>>> create
>>> these types of files. Also, if there is a compiler that
does
> this
>>> are
>>> there directions or an example that could show me how to
> create
> a
>>> excutable out of my pre-existing matlab .m file?
>>>
>>> -Ender-