Path: news.mathworks.com!not-for-mail
From: <HIDDEN>
Newsgroups: comp.soft-sys.matlab
Subject: Failed 'nidaq' adaptor registration
Date: Fri, 7 Mar 2008 14:55:04 +0000 (UTC)
Organization: Newcastle University
Lines: 26
Message-ID: <fqrl08$l5r$1@fred.mathworks.com>
Reply-To: <HIDDEN>
NNTP-Posting-Host: webapp-03-blr.mathworks.com
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 8bit
X-Trace: fred.mathworks.com 1204901704 21691 172.30.248.38 (7 Mar 2008 14:55:04 GMT)
X-Complaints-To: news@mathworks.com
NNTP-Posting-Date: Fri, 7 Mar 2008 14:55:04 +0000 (UTC)
X-Newsreader: MATLAB Central Newsreader 1307140
Xref: news.mathworks.com comp.soft-sys.matlab:455959



Dear friends,
I&#8217;ve got the following system configuration:
1) NI-DAQmx driver 8.5.0f5
2) MatLab Version 7.5.0.342 (R2007b)
3) Data Acquisition Toolbox  Version 2.11
4) plug-in NI DAQ boards work nicely with NI software

My MatLab does not automatically register 'nidaq' adaptor, 
neither I can do it manually.

>> daqregister('nidaq')
ans =
Unable to load adaptor: 
C:\MATLABR2007b\toolbox\daq\daq\private\mwnidaq.dll.
Driver files or DLL for the specified adaptor could not be 
found or are not installed.

Apparently it cannot find &#8216;nidaqmx.dll&#8217;, which is not 
present on the PC.
Question: is there a compatibility problem (does The Data 
Acquisition Toolbox&#8482; software require Version 7.5 of the NI-
DAQmx drivers)? 

Thank you for your advise,
Maxim