Path: news.mathworks.com!not-for-mail
From: "Xi Chen" <geomechanics@gmail.com>
Newsgroups: comp.soft-sys.matlab
Subject: How to modify the figure data in batch?
Date: Thu, 9 Oct 2008 13:53:05 +0000 (UTC)
Organization: The MathWorks, Inc.
Lines: 10
Message-ID: <gcl2c1$c6$1@fred.mathworks.com>
Reply-To: "Xi Chen" <geomechanics@gmail.com>
NNTP-Posting-Host: webapp-02-blr.mathworks.com
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 8bit
X-Trace: fred.mathworks.com 1223560385 390 172.30.248.37 (9 Oct 2008 13:53:05 GMT)
X-Complaints-To: news@mathworks.com
NNTP-Posting-Date: Thu, 9 Oct 2008 13:53:05 +0000 (UTC)
X-Newsreader: MATLAB Central Newsreader 1543153
Xref: news.mathworks.com comp.soft-sys.matlab:494242



I want to modify the Zdata in the 3D figure, for example,
all data are multiplied with 100. I don't want to change
the data one by one manually, how to do the change in batch?

Is the "enter expression" useful? Thank you for your helps!

see the illustration figure

http://preconditioner.googlepages.com/temp.jpg