Path: news.mathworks.com!not-for-mail
From: "ching l" <chinglnc@hotmail.com>
Newsgroups: comp.soft-sys.matlab
Subject: Re: repetitive counter (GUI)
Date: Tue, 14 Jul 2009 07:19:01 +0000 (UTC)
Organization: The MathWorks, Inc.
Lines: 35
Message-ID: <h3hbh5$ljn$1@fred.mathworks.com>
References: <h3g5v9$6ep$1@fred.mathworks.com> <h3g6rd$58f$1@fred.mathworks.com> <h3g7ie$mr4$1@fred.mathworks.com> <h3g8bd$lin$1@news.eternal-september.org>
Reply-To: "ching l" <chinglnc@hotmail.com>
NNTP-Posting-Host: webapp-03-blr.mathworks.com
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 8bit
X-Trace: fred.mathworks.com 1247555941 22135 172.30.248.38 (14 Jul 2009 07:19:01 GMT)
X-Complaints-To: news@mathworks.com
NNTP-Posting-Date: Tue, 14 Jul 2009 07:19:01 +0000 (UTC)
X-Newsreader: MATLAB Central Newsreader 1438759
Xref: news.mathworks.com comp.soft-sys.matlab:555219


dpb <none@non.net> wrote in message <h3g8bd$lin$1@news.eternal-september.org>...
> ching l wrote:
> ....
> > it does increase but it didn't stop at 2. It increases till 3 and
> > repeat counter=3 again.
> > 
> > Any idea why?
> > 
> ...
> >> "ching l" <chinglnc@hotmail.com> wrote in message
> >> <h3g5v9$6ep$1@fred.mathworks.com>...
> >>> handles = guidata(gcbo);
> >>> if(handles.count <= 2)
> >>>   handles.count= handles.count+1; handles.count
> >>> else
> >>>  set(hObject, 'enable', 'off') % switch off button 
> >>> end
> ...
> 
> [Top posting repaired...please don't do that; it makes following the 
> conversation much more difficult...]
> 
>  > it does increase but it didn't stop at 2. It increases till 3 and
>  > repeat counter=3 again.
>  >
>  > Any idea why?
> 
> As it happens, yes... :)
> 
> What happens in your logic when enter the function w/ handles.count==2?
> 

Guess what, the results is the same :-(

I'm not sure why...