I have a function which is integral of(bounds are from minus infinity to x) e^((-0.5)*t^2)/sqrt(2*pi) dt.
Its Taylor Series is: 0.5+[1/sqrt(2*pi)*(x+(-0.5)*x^3/1!*1/3+(-0.5)^2*x^5/2!*1/5+...+(-0.5)^25*x^51/25!*1/51+...
I need to write a function that keeps counting the series until the sum doesn't change...
I have written this code:
x=input('Enter a value to expand around:');
But I cannot get accurate solution. What is the problem with my code???
Turgut <email@example.com> wrote in message <18086837.3862.1242915230023.JavaMail.firstname.lastname@example.org>...
> I have a function which is integral of(bounds are from minus infinity to x) e^((-0.5)*t^2)/sqrt(2*pi) dt.
> Its Taylor Series is: 0.5+[1/sqrt(2*pi)*(x+(-0.5)*x^3/1!*1/3+(-0.5)^2*x^5/2!*1/5+...+(-0.5)^25*x^51/25!*1/51+...
> I need to write a function that keeps counting the series until the sum doesn't change...
> I have written this code:
> function fx=f(x)
> clear all
> format long
> x=input('Enter a value to expand around:');
> while (fx~=sum)
> But I cannot get accurate solution. What is the problem with my code???
You almost have it right. Your problem is that you started out with the wrong value for the 'sum' variable and that causes you to lose the first required term in the sum. What you want to get is the sum:
x - x^3/6 + x^5/40 + x^7/336 - ....
but what you are getting is only
-x^3/6 + x^5/40 + x^7/336 - ....
with the initial x term missing. You should have initialized 'sum' as the value x, rather than zero.
In general it is not a good idea to end an iteration with a requirement of exact equality, as here between 'fx' and 'sum', when you are dealing with floating point fractions. There are cases when values like this will oscillate back and forth due to particular round-off error combinations and will never drop out of the while-loop. It is usual to end an iteration with some kind of tolerance check, such as
while abs(fx-sum) > tol
with 'tol' being a maximum permitted error.
However in your code, admittedly your method above would actually work, with iteration continuing until 'term' becomes so small its addition to 'sum' would cause no change in 'sum.
One thing you should be aware of. The fact that your cumulative distribution function is what is known as an "entire" analytic function means that its Taylor series will always converge to the true cdf value no matter how large x is in either the positive or negative directions, or indeed no matter how large a complex value is used, provided enough terms are summed. However in practical terms this has a limit based on the buildup of round-off errors produced by overly numerous intermediate calculations. For an extreme example, in your problem if you were to assign x the value 1000, the resulting individual values of 'term' would quickly grow so large you would overflow to infinities before the k numbers could begin to reduce them back down in size. Even if you escaped that fate the round-off errors would completely ruin the answer. That is why an effective routine for computing
something like the cumulative normal distribution must allow for greater complexity than this simple while-loop method in order to actually work properly for all possible input values. However I understand that such simple methods are a necessary part of one's learning the ins and outs of numerical analysis.
You can think of your watch list as threads that you have bookmarked.
You can add tags, authors, threads, and even search results to your watch list. This way you can easily keep track of topics that you're interested in. To view your watch list, click on the "My Newsreader" link.
To add items to your watch list, click the "add to watch list" link at the bottom of any page.
To add search criteria to your watch list, search for the desired term in the search box. Click on the "Add this search to my watch list" link on the search results page.
You can also add a tag to your watch list by searching for the tag with the directive "tag:tag_name" where tag_name is the name of the tag you would like to watch.
To add an author to your watch list, go to the author's profile page and click on the "Add this author to my watch list" link at the top of the page. You can also add an author to your watch list by going to a thread that the author has posted to and clicking on the "Add this author to my watch list" link. You will be notified whenever the author makes a post.
To add a thread to your watch list, go to the thread page and click the "Add this thread to my watch list" link at the top of the page.
No tags are associated with this thread.
A tag is like a keyword or category label associated with each thread. Tags make it easier for you to find threads of interest.
Anyone can tag a thread. Tags are public and visible to everyone.
The newsgroups are a worldwide forum that is open to everyone. Newsgroups are used to discuss a huge range of topics, make announcements, and trade files.
Discussions are threaded, or grouped in a way that allows you to read a posted message and all of its replies in chronological order. This makes it easy to follow the thread of the conversation, and to see what’s already been said before you post your own reply or make a new posting.
Newsgroup content is distributed by servers hosted by various organizations on the Internet. Messages are exchanged and managed using open-standard protocols. No single entity “owns” the newsgroups.
There are thousands of newsgroups, each addressing a single topic or area of interest. The MATLAB Central Newsreader posts and displays messages in the comp.soft-sys.matlab newsgroup.
You can use the integrated newsreader at the MATLAB Central website to read and post messages in this newsgroup. MATLAB Central is hosted by MathWorks.
Messages posted through the MATLAB Central Newsreader are seen by everyone using the newsgroups, regardless of how they access the newsgroups. There are several advantages to using MATLAB Central.
Your MATLAB Central account is tied to your MathWorks Account for easy access.
Use the Email Address of Your Choice
The MATLAB Central Newsreader allows you to define an alternative email address as your posting address, avoiding clutter in your primary mailbox and reducing spam.
Most newsgroup spam is filtered out by the MATLAB Central Newsreader.
Messages can be tagged with a relevant label by any signed-in user. Tags can be used as keywords to find particular files of interest, or as a way to categorize your bookmarked postings. You may choose to allow others to view your tags, and you can view or search others’ tags as well as those of the community at large. Tagging provides a way to see both the big trends and the smaller, more obscure ideas and applications.
Setting up watch lists allows you to be notified of updates made to postings selected by author, thread, or any search variable. Your watch list notifications can be sent by email (daily digest or immediate), displayed in My Newsreader, or sent via RSS feed.
You can also select a location from the following list: