The data I have is from a numerical simulation. I have a (virtual) watertank and in that tank are 950 probes that measure the 3 veclocity components, pressure and density (one of the velocity components is zero in an ideal situation).

The output is like this:

V_y V_z V_x pressure density (one files (i.e. one probe) measures on 500 timesteps so I get 500 rows of this format in one file, and that brings me to a total of 950 files with data in this format, but for this purpose I would like to make a plot of one timestep, so one row of each file)

In a separate file are the locations of the probes and are in a format:

y z x

this file has 950 rows of this format (row 1 corresponds to file 1)

I was able to make a plot of the velocities seperatly, but not together and not with arrows (I used contour)

Here are the m-files I am using now (these are for all timesteps)

This is for loading U (x-speed)

________________________________________

U=13.*[sonda(:,3),sonda(:,2)];

for i=50:99

number=num2str(i);

file=strcat('son0',number,'.out');

stored=load( file );

for j=1:500

U((i-49),j+2)=stored(j,4);

end

end

for i=100:999

number=num2str(i);

file=strcat('son',number,'.out');

stored=load( file );

for j=1:500

U((i-49),j+2)=stored(j,4);

end

end

________________________________________

This is for plotting U and saving the plots on my harddisk

________________________________________

x=U(:,1);y=U(:,2);

xmin=min(x); ymin=min(y);

xmax=max(x); ymax=max(y);

xres=200; yres=200;

xv=linspace(xmin, xmax, xres); yv=linspace(ymin, ymax, yres);

[Xinterp,Yinterp]=meshgrid(xv,yv);

for i=1:500

z=U(:,i+2);

Zinterp=griddata(x,y,z,Xinterp,Yinterp);

number=num2str(i);

A=strcat('Perpendicular velocity(U in cm/s) on t=',number);

h=1;

contour(Xinterp,Yinterp,Zinterp,20); title(A);xlabel('Distance to the moving wall'); ylabel('Distance to the bottom');caxis([-0.6 0.6]);

load('Mycolormaps','mycmap');

set(1,'colormap',mycmap);

colorbar('location','eastoutside');

filename=['t',num2str(i+100),'.jpg'];

saveas(h,filename,'jpeg');

end

________________________________________

Could someone please explain how to rearrange my data such that I can use quiver or an other plot function that would serve my purpose? Or if it turns out to be really easy, adjust my m-files so that I can use it? (Please don;t make it too complicated, because creating these m-files is about my level of understanding of matlab).

Thank you in advance,

Ivo

(Sean)

"Ivo " <i.g.s.v.hooijdonk@student.tue.nl> wrote in message <i1er2u$io3$1@fred.mathworks.com>...

> I have a problem with plotting a 2D velocity field. I would like to have a plot that shows the velocity in the xy direction at various positions.

>

> The data I have is from a numerical simulation. I have a (virtual) watertank and in that tank are 950 probes that measure the 3 veclocity components, pressure and density (one of the velocity components is zero in an ideal situation).

> The output is like this:

> V_y V_z V_x pressure density (one files (i.e. one probe) measures on 500 timesteps so I get 500 rows of this format in one file, and that brings me to a total of 950 files with data in this format, but for this purpose I would like to make a plot of one timestep, so one row of each file)

>

> In a separate file are the locations of the probes and are in a format:

> y z x

> this file has 950 rows of this format (row 1 corresponds to file 1)

>

> I was able to make a plot of the velocities seperatly, but not together and not with arrows (I used contour)

>

> Here are the m-files I am using now (these are for all timesteps)

> This is for loading U (x-speed)

> ________________________________________

> U=13.*[sonda(:,3),sonda(:,2)];

> for i=50:99

> number=num2str(i);

> file=strcat('son0',number,'.out');

> stored=load( file );

> for j=1:500

> U((i-49),j+2)=stored(j,4);

> end

> end

> for i=100:999

> number=num2str(i);

> file=strcat('son',number,'.out');

> stored=load( file );

> for j=1:500

> U((i-49),j+2)=stored(j,4);

> end

> end

> ________________________________________

> This is for plotting U and saving the plots on my harddisk

> ________________________________________

> x=U(:,1);y=U(:,2);

> xmin=min(x); ymin=min(y);

> xmax=max(x); ymax=max(y);

>

> xres=200; yres=200;

>

> xv=linspace(xmin, xmax, xres); yv=linspace(ymin, ymax, yres);

>

> [Xinterp,Yinterp]=meshgrid(xv,yv);

> for i=1:500

> z=U(:,i+2);

> Zinterp=griddata(x,y,z,Xinterp,Yinterp);

> number=num2str(i);

> A=strcat('Perpendicular velocity(U in cm/s) on t=',number);

> h=1;

> contour(Xinterp,Yinterp,Zinterp,20); title(A);xlabel('Distance to the moving wall'); ylabel('Distance to the bottom');caxis([-0.6 0.6]);

> load('Mycolormaps','mycmap');

> set(1,'colormap',mycmap);

> colorbar('location','eastoutside');

> filename=['t',num2str(i+100),'.jpg'];

> saveas(h,filename,'jpeg');

> end

> ________________________________________

>

> Could someone please explain how to rearrange my data such that I can use quiver or an other plot function that would serve my purpose? Or if it turns out to be really easy, adjust my m-files so that I can use it? (Please don;t make it too complicated, because creating these m-files is about my level of understanding of matlab).

>

> Thank you in advance,

>

> Ivo

If my understanding of what you have is correct:

>>quiver(Xinterp(:),Yinterp(:),U(:,1),U(:,2)); %The colon operator turns the matrix into a vector taking pieces column-wise.

%Thus what I'm doing is making 4 column vectors: x-coords, y-coords, U-coords, V-coords and quiver() will draw an arrow for each row of the 4.

(Sean)

> I have a problem with plotting a 2D velocity field. I would like to have a plot that shows the velocity in the xy direction at various positions.

>

> The data I have is from a numerical simulation. I have a (virtual) watertank and in that tank are 950 probes that measure the 3 veclocity components, pressure and density (one of the velocity components is zero in an ideal situation).

> The output is like this:

> V_y V_z V_x pressure density (one files (i.e. one probe) measures on 500 timesteps so I get 500 rows of this format in one file, and that brings me to a total of 950 files with data in this format, but for this purpose I would like to make a plot of one timestep, so one row of each file)

>

> In a separate file are the locations of the probes and are in a format:

> y z x

> this file has 950 rows of this format (row 1 corresponds to file 1)

>

> I was able to make a plot of the velocities seperatly, but not together and not with arrows (I used contour)

>

> Here are the m-files I am using now (these are for all timesteps)

> This is for loading U (x-speed)

> ________________________________________

> U=13.*[sonda(:,3),sonda(:,2)];

> for i=50:99

> number=num2str(i);

> file=strcat('son0',number,'.out');

> stored=load( file );

> for j=1:500

> U((i-49),j+2)=stored(j,4);

> end

> end

> for i=100:999

> number=num2str(i);

> file=strcat('son',number,'.out');

> stored=load( file );

> for j=1:500

> U((i-49),j+2)=stored(j,4);

> end

> end

> ________________________________________

> This is for plotting U and saving the plots on my harddisk

> ________________________________________

> x=U(:,1);y=U(:,2);

> xmin=min(x); ymin=min(y);

> xmax=max(x); ymax=max(y);

>

> xres=200; yres=200;

>

> xv=linspace(xmin, xmax, xres); yv=linspace(ymin, ymax, yres);

>

> [Xinterp,Yinterp]=meshgrid(xv,yv);

> for i=1:500

> z=U(:,i+2);

> Zinterp=griddata(x,y,z,Xinterp,Yinterp);

> number=num2str(i);

> A=strcat('Perpendicular velocity(U in cm/s) on t=',number);

> h=1;

> contour(Xinterp,Yinterp,Zinterp,20); title(A);xlabel('Distance to the moving wall'); ylabel('Distance to the bottom');caxis([-0.6 0.6]);

> load('Mycolormaps','mycmap');

> set(1,'colormap',mycmap);

> colorbar('location','eastoutside');

> filename=['t',num2str(i+100),'.jpg'];

> saveas(h,filename,'jpeg');

> end

> ________________________________________

>

> Could someone please explain how to rearrange my data such that I can use quiver or an other plot function that would serve my purpose? Or if it turns out to be really easy, adjust my m-files so that I can use it? (Please don;t make it too complicated, because creating these m-files is about my level of understanding of matlab).

>

> Thank you in advance,

>

> Ivo

If my understanding of what you have is correct:

>>quiver(Xinterp(:),Yinterp(:),U(:,1),U(:,2)); %The colon operator turns the matrix into a vector taking pieces column-wise.

%Thus what I'm doing is making 4 column vectors: x-coords, y-coords, U-coords, V-coords and quiver() will draw an arrow for each row of the 4.

> "Ivo " <i.g.s.v.hooijdonk@student.tue.nl> wrote in message <i1er2u$io3$1@fred.mathworks.com>...

> > I have a problem with plotting a 2D velocity field. I would like to have a plot that shows the velocity in the xy direction at various positions.

> >

> > The data I have is from a numerical simulation. I have a (virtual) watertank and in that tank are 950 probes that measure the 3 veclocity components, pressure and density (one of the velocity components is zero in an ideal situation).

> > The output is like this:

> > V_y V_z V_x pressure density (one files (i.e. one probe) measures on 500 timesteps so I get 500 rows of this format in one file, and that brings me to a total of 950 files with data in this format, but for this purpose I would like to make a plot of one timestep, so one row of each file)

> >

> > In a separate file are the locations of the probes and are in a format:

> > y z x

> > this file has 950 rows of this format (row 1 corresponds to file 1)

> >

> > I was able to make a plot of the velocities seperatly, but not together and not with arrows (I used contour)

> >

> > Here are the m-files I am using now (these are for all timesteps)

> > This is for loading U (x-speed)

> > ________________________________________

> > U=13.*[sonda(:,3),sonda(:,2)];

> > for i=50:99

> > number=num2str(i);

> > file=strcat('son0',number,'.out');

> > stored=load( file );

> > for j=1:500

> > U((i-49),j+2)=stored(j,4);

> > end

> > end

> > for i=100:999

> > number=num2str(i);

> > file=strcat('son',number,'.out');

> > stored=load( file );

> > for j=1:500

> > U((i-49),j+2)=stored(j,4);

> > end

> > end

> > ________________________________________

> > This is for plotting U and saving the plots on my harddisk

> > ________________________________________

> > x=U(:,1);y=U(:,2);

> > xmin=min(x); ymin=min(y);

> > xmax=max(x); ymax=max(y);

> >

> > xres=200; yres=200;

> >

> > xv=linspace(xmin, xmax, xres); yv=linspace(ymin, ymax, yres);

> >

> > [Xinterp,Yinterp]=meshgrid(xv,yv);

> > for i=1:500

> > z=U(:,i+2);

> > Zinterp=griddata(x,y,z,Xinterp,Yinterp);

> > number=num2str(i);

> > A=strcat('Perpendicular velocity(U in cm/s) on t=',number);

> > h=1;

> > contour(Xinterp,Yinterp,Zinterp,20); title(A);xlabel('Distance to the moving wall'); ylabel('Distance to the bottom');caxis([-0.6 0.6]);

> > load('Mycolormaps','mycmap');

> > set(1,'colormap',mycmap);

> > colorbar('location','eastoutside');

> > filename=['t',num2str(i+100),'.jpg'];

> > saveas(h,filename,'jpeg');

> > end

> > ________________________________________

> >

> > Could someone please explain how to rearrange my data such that I can use quiver or an other plot function that would serve my purpose? Or if it turns out to be really easy, adjust my m-files so that I can use it? (Please don;t make it too complicated, because creating these m-files is about my level of understanding of matlab).

> >

> > Thank you in advance,

> >

> > Ivo

>

>

> If my understanding of what you have is correct:

> >>quiver(Xinterp(:),Yinterp(:),U(:,1),U(:,2)); %The colon operator turns the matrix into a vector taking pieces column-wise.

> %Thus what I'm doing is making 4 column vectors: x-coords, y-coords, U-coords, V-coords and quiver() will draw an arrow for each row of the 4.

Thank you. i don't really understand why I didn't get it right before. I have been spending quitte some time on solving this. But now it works.

You can think of your watch list as threads that you have bookmarked.

You can add tags, authors, threads, and even search results to your watch list. This way you can easily keep track of topics that you're interested in. To view your watch list, click on the "My Newsreader" link.

To add items to your watch list, click the "add to watch list" link at the bottom of any page.

To add search criteria to your watch list, search for the desired term in the search box. Click on the "Add this search to my watch list" link on the search results page.

You can also add a tag to your watch list by searching for the tag with the directive "tag:tag_name" where tag_name is the name of the tag you would like to watch.

To add an author to your watch list, go to the author's profile page and click on the "Add this author to my watch list" link at the top of the page. You can also add an author to your watch list by going to a thread that the author has posted to and clicking on the "Add this author to my watch list" link. You will be notified whenever the author makes a post.

To add a thread to your watch list, go to the thread page and click the "Add this thread to my watch list" link at the top of the page.

A tag is like a keyword or category label associated with each thread. Tags make it easier for you to find threads of interest.

Anyone can tag a thread. Tags are public and visible to everyone.

Got questions?

Get answers.

MATLAB and Simulink resources for Arduino, LEGO, and Raspberry Pi test

Learn moreDiscover what MATLAB ^{®} can do for your career.

Opportunities for recent engineering grads.

Apply TodayThe newsgroups are a worldwide forum that is open to everyone. Newsgroups are used to discuss a huge range of topics, make announcements, and trade files.

Discussions are threaded, or grouped in a way that allows you to read a posted message and all of its replies in chronological order. This makes it easy to follow the thread of the conversation, and to see what’s already been said before you post your own reply or make a new posting.

Newsgroup content is distributed by servers hosted by various organizations on the Internet. Messages are exchanged and managed using open-standard protocols. No single entity “owns” the newsgroups.

There are thousands of newsgroups, each addressing a single topic or area of interest. The MATLAB Central Newsreader posts and displays messages in the comp.soft-sys.matlab newsgroup.

**MATLAB Central**

You can use the integrated newsreader at the MATLAB Central website to read and post messages in this newsgroup. MATLAB Central is hosted by MathWorks.

Messages posted through the MATLAB Central Newsreader are seen by everyone using the newsgroups, regardless of how they access the newsgroups. There are several advantages to using MATLAB Central.

**One Account**

Your MATLAB Central account is tied to your MathWorks Account for easy access.

**Use the Email Address of Your Choice**

The MATLAB Central Newsreader allows you to define an alternative email address as your posting address, avoiding clutter in your primary mailbox and reducing spam.

**Spam Control**

Most newsgroup spam is filtered out by the MATLAB Central Newsreader.

**Tagging**

Messages can be tagged with a relevant label by any signed-in user. Tags can be used as keywords to find particular files of interest, or as a way to categorize your bookmarked postings. You may choose to allow others to view your tags, and you can view or search others’ tags as well as those of the community at large. Tagging provides a way to see both the big trends and the smaller, more obscure ideas and applications.

**Watch lists**

Setting up watch lists allows you to be notified of updates made to postings selected by author, thread, or any search variable. Your watch list notifications can be sent by email (daily digest or immediate), displayed in My Newsreader, or sent via RSS feed.

- Use a newsreader through your school, employer, or internet service provider
- Pay for newsgroup access from a commercial provider
- Use Google Groups
- Mathforum.org provides a newsreader with access to the comp.soft sys.matlab newsgroup
- Run your own server. For typical instructions, see: http://www.slyck.com/ng.php?page=2

You can also select a location from the following list:

- Canada (English)
- United States (English)

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)